-
JTAG communication failure, check connection, JTAG interface, target power etc.
6 KB (494 words) - 11:24, 26 June 2010
-
I hooked up a USB A female-female adapter to the data/power end and to a dual PS/2 to USB keyboard/mouse adapter with a TypeMatrix 2020
I hooked the aux power line to my laptop.
1 KB (221 words) - 19:53, 5 November 2008
-
* Hold in the AUX button on power-up to access the boot menu.
... environment variable to -1 if you want it to always halt at the U-Boot on power-up.
17 KB (2,539 words) - 23:26, 14 April 2012
-
==== Power Supply ====
* If the phone is self-powered, there is no need to connect a power supply for JTAG, USB and serial port, since those are phone-powered
3 KB (522 words) - 14:16, 22 October 2008
-
| [[Neo_1973_GTA01_Power_Management|Power Management]]
* [[Neo1973 Power Button|The Power Button]]
6 KB (924 words) - 08:25, 10 February 2012
-
This information is mostly useful for developers and power/curious users. If you are looking for a kernel to flash into your GTA01/GTA
15 KB (2,540 words) - 16:52, 17 August 2011
-
...stating mistake is to forget to actually activate the CPU. Just connecting power is not enough !
Press and hold the power button until the boot loader does its count-down, or, in case there is no r
8 KB (1,208 words) - 16:43, 10 February 2013
-
* [http://fso-control.projects.openmoko.org/ fso-control] - Popup Power menu to shutdown/suspend/reboot.
22 KB (3,343 words) - 11:41, 12 January 2012
-
... level device control service manages peripheral control, i.e. controlling power for individual subsystems such as
* Backlight brightness and power,
9 KB (1,239 words) - 12:25, 22 October 2008
-
* GTA02v3 power supply flaw found, GTA02v4 needed - DONE
5 KB (709 words) - 11:14, 4 September 2008
-
Some battery power saving mode for not listening to all cell broadcasts.
...o supports this, and how we configure it. It's optional. But we care about power saving!}}
8 KB (1,147 words) - 15:53, 23 November 2011
-
...ey|Michael 'Mickey' Lauer]]: ''We don't have any hardware buttons except a power button and a "phone" button. As mentioned in Look & Feel (deleted article),
12 KB (2,016 words) - 21:48, 16 September 2008
-
Concern with Short Press on Hardware Power Button:
Currently a short press on the Hardware Power Button will Close the topmost application.
3 KB (550 words) - 23:25, 12 August 2007
-
There are times when you wish to power up the device and not power up the gsm/cellphone portion of the phone. For example in meetings you migh
... some cable that would be attached to an openmoko device. In order to save power, one could switch off the gps and only use the bike's sensor.
105 KB (17,388 words) - 17:47, 11 May 2010
-
Q: ''In device setting, do we need a power saving mode? For mobile devices, energy consumption should be the first con
A: I was only planning on using one power save mode. The best one we can. I don't think this needs to be configurable
1 KB (211 words) - 11:22, 19 July 2007
-
We will have two buttons on the left side. One for power and one for general usage. Mickey and I were talking about using this as a
2 KB (315 words) - 18:41, 10 June 2007
-
O Antenna Power On
o Antenna Power Off
10 KB (1,533 words) - 16:19, 8 February 2010
-
This page details the power management of the Phase 1 Neo1973. Much of it is inapplicable to earlier mo
Power management is of utmost concern to any mobile device.
14 KB (2,292 words) - 07:09, 12 September 2010
-
| Silicon Power || SP004GBSTH006V10 || 4GB || 2.0 (SDHC) || Class 4 || ? || ?|| ? || ? ||
| Silicon Power || SP004GBSTH006V30 || 4GB || 2.0 (SDHC) || Class 6 || ? || ?|| ? || ? ||
14 KB (1,712 words) - 17:55, 7 March 2012
-
* If the Neo1973 does not turn on automatically at this point, hold the power button for 5 seconds
...ricked" one will not. Note that there will be no visible feedback from the power-button press on a bricked device.
9 KB (1,491 words) - 08:28, 10 February 2012
-
* power-up the GSM Modem
4 KB (709 words) - 07:40, 19 July 2009
-
...have a 'backup' battery available when the first is completely depleted of power.
I think only the NiMH can be recharged whatever the remaining power level is.
1 KB (216 words) - 10:26, 13 July 2008
-
...rging logic is embedded into our [[Neo1973 GTA01 Power Management|PCF50606 Power Management]] Unit (PMU).
If more than the available current is drawn from them, they may be reset, or power off.
8 KB (1,355 words) - 08:29, 10 February 2012
-
*Power consumption in various modes - by someone with P1 hardware.
... is to get the following numbers. CPU Idle and max. Backlight power. Audio power max. GSM modem max, normal and off.
2 KB (367 words) - 08:31, 11 October 2007
-
* Power on the Neo. (If it has powered on by itself, that's okay.)
=== power-off while DFU ===
8 KB (1,239 words) - 08:32, 10 February 2012
-
- '''A cycle computer using GPS'''. Here is some info about power usage of the GPS:
...nd not cripple the phone with power consumption. A dyanmo or supplemantary power source on the bike is another option but would need a regulator and dock of
3 KB (597 words) - 00:58, 9 April 2007
-
...hes in buildings, with many options including mesh networks and aggressive power saving compared to bluetooth. (Almost no products available.)
...nnecting worn devices. Similar to ZigBee, but much simpler and maybe lower power. ([http://www.thisisant.com/?section=9 Short list] of products.)
56 KB (9,304 words) - 13:52, 6 April 2011
-
... work across a wide range of frequencies while being physically small, low power and cheap - becomes available.
==Power usage processor==
6 KB (1,008 words) - 12:06, 29 June 2009
-
* Power (kurz drücken) für Suspend Modus.
2 KB (295 words) - 22:00, 16 February 2010
-
:Neo1973 ex: Hardware:Neo1973:GTA01:Power Managment
2 KB (245 words) - 10:16, 9 August 2007
-
== Power it up ==
...the adapter by clicking on the bluetooth icon in the top bar and selecting power on.
36 KB (5,665 words) - 15:53, 24 July 2010
-
* Linux sysadmin/developer/power user (if it has a manpage, I can surely use it/extend it/code for it)
* Network admin/designer/implementor/power user (anything from SLIP to PPP, 10Base2 to 1000BaseLX, 802.1x to 802.11i -
1 KB (253 words) - 11:47, 14 July 2007
-
*'''AA or AAA battery''' power options.
...olar-powered mobile]. Using a rugged solar cell (maybe a solar foil) and a power regulating circuit the Neo could be powered ''CO2-neutral''. After all, the
9 KB (1,512 words) - 12:21, 31 August 2008
-
*The Assistance Server has a good satellite signal, and lots of computation power, so it can compare fragmentary signals relayed to it by cell phones, with t
13 KB (2,230 words) - 04:08, 7 October 2008
-
* [http://fso-control.projects.openmoko.org/ fso-control] - Popup Power menu to shutdown/suspend/reboot.
15 KB (2,262 words) - 19:23, 29 July 2010
-
# Press the Power button until the phone powers on and displays the boot menu
... set to Host mode and the other one set to Device mode. One Neo could give power to the USB-port it the other Neo's battery is low. ''(I have to verify this
34 KB (5,408 words) - 08:30, 10 February 2012
-
...timized like below 240x320 it's work like a charm and to quit just use the power button.
11 KB (1,764 words) - 09:14, 23 May 2011
-
...stem]]. It's connected to the VB power rail (battery terminal voltage) for power and thus needs to be powered off separately from the main system.
The audio power output may vary as the battery discharges:
1 KB (196 words) - 11:11, 18 August 2008
-
You have to be careful about selecting the power source for
which provides a spare power regulator. But keep in mind that it is steered by i2c.
2 KB (350 words) - 08:19, 4 September 2009
-
=== Getting neo1973 GTA04 GSM to recover properly after power down ===
Every time after you power off the gsm:
5 KB (719 words) - 14:41, 27 December 2009
-
* uses less power (GPS shall not be turned on, the cell info is already available)
9 KB (1,482 words) - 07:41, 3 September 2008
-
|AGPS (3G only), 2 megapixel camera, 4 buttons (power, volume up, volume down, mute, Home), [http://www.tuaw.com/2007/09/10/iphon
6 KB (878 words) - 21:22, 20 August 2010
-
...led) is some kind of 'detector'. Works with USB adapter cable, external AC power supply, most likely car cirgarette charger, but not with those small 1.5V '
4 KB (639 words) - 17:16, 2 August 2009
-
...All of this can be done from the MicroSD card, while user simply adds more power to the telephone device turning it into a powerful 400Mhz PC.
11 KB (1,818 words) - 21:28, 18 June 2009
-
...NAND controller, MMC/SD host, [[I2C]] and IIS interfaces, Memory & Clock & Power management controllers, RAM.
...50606]] || Works || (Aka PMU) Fakes the battery charge level (set at 88%), POWER button, etc. Also contains an RTC, also unused by Linux.
35 KB (5,125 words) - 08:42, 10 February 2012
-
This will bring up the OpenMoko :) Use SPACE for AUX and ENTER for POWER.
36 KB (5,428 words) - 08:37, 10 August 2009
-
==Power Sources==
===V12 Embedded power source===
12 KB (1,974 words) - 02:56, 26 July 2009
-
...Boot lader|boot loader]]. This probably isn't what you want. Let the phone power up first.
10 KB (1,686 words) - 16:58, 24 September 2011
-
power the device up, become root, and run
9 KB (1,378 words) - 08:40, 10 February 2012
-
No power switching (usb 1.0)
Port 1: 0000.0103 power enable connect
32 KB (3,433 words) - 12:23, 31 August 2008
-
==== Disable power management ====
... apparently get upset by power managed devices, and the Freerunner enables power management of the wifi by default to preserve battery. One user's wrt54g ce
15 KB (2,133 words) - 09:38, 10 March 2011
-
...глая, размещена рядом с USB разъемом. [[Neo1973 Power button/ru | фото кнопки]].
...о неизвестно, но можете посмотреть [[Neo1973 Power Management#Approximate_power_draw_of_various_subsystems|примерную
30 KB (1,285 words) - 17:01, 30 August 2008
-
A: No suitable low power open source WiFi device was available when the [[Neo1973]] was designed. A
A: There has been no word on this so far, but see [[Neo1973 Power Management#Approximate_power_draw_of_various_subsystems|these estimates]] f
13 KB (2,003 words) - 17:02, 30 August 2008
-
==== Power Management ====
The '''gta01_pm_gsm''' driver implements GSM power management (this means, if this is compiled as a module, you have to load t
13 KB (1,671 words) - 22:32, 20 August 2008
-
...按下[[Neo1973 AUX Button]] 你可以循环使用选单项目。使用''POWER''按钮选取其中的项目。
13 KB (947 words) - 13:36, 1 February 2010
-
* Power button press
...t 30mA additional standby current, since we cannot properly switch off the power supply to the S3C2410 PLL's. There is nothing we can do to change this wit
11 KB (1,314 words) - 08:45, 23 August 2008
-
=== Usb Power ===
to also supply power to the upstream port of the hub.
3 KB (436 words) - 02:13, 26 November 2008
-
The CPU is put into a low power mode where it still has enough compute power to take the signal from the microphone, divide it into
833 B (143 words) - 12:24, 31 August 2008
-
... Even when on standby. May be just on button press or some gesture to save power. Screen would be on just for 2 seconds or so.
* Power saving...
811 B (120 words) - 12:26, 31 August 2008
-
A: In der Designphase des Neo1973 gab es kein passendes "low power open source" WiFi device. Ein nicht offenes WiFi Modul hätte die Entwi
...bt es keine Abschätzung über die Nutzungsdauer, klicke [[Neo1973 Power Management#Approximate_power_draw_of_various_subsystems|hier]] für ein
16 KB (2,514 words) - 19:36, 15 November 2009
-
* Power button press
...t 30mA additional standby current, since we cannot properly switch off the power supply to the S3C2410 PLL's. There is nothing we can do to change this wit
12 KB (1,727 words) - 23:15, 22 August 2008
-
neo1973 power-off
then Power-off, and enter the Bootmenu to test the new Entry.If you can boot from NAND
24 KB (4,075 words) - 08:12, 10 February 2012
-
Das drücken des Power Buttons (abhängig von Ihrer [[u-boot]] Version muss der Button >= 5 Sekund
Wenn Sie den Power Button ausreichend lange gedrückt haben, wird vom Vibrationsmodul ein leic
4 KB (632 words) - 09:34, 12 January 2010
-
...But it still takes 500mA for transmitting, but maybe they can limit the Tx power (100 milliwatts of RF would mean V*mA would be 100 at perfect efficiency).
... can use? Socket I think has an SD card format WiFi, but I don't know the power or size for that either.
3 KB (552 words) - 00:27, 31 March 2007
-
1 full functionality ("full functionality" is where the highest level of power is drawn)
...md because gsmd may put the phone in a unknown state. It then turns on the power to the phone, modifies the ownership, and then creates a tty connection. Fi
17 KB (2,747 words) - 13:17, 27 August 2010
-
...g online handwriting recognition?'''<br>Here I mean in terms of processing power and real-time stroke resolution. This is a fundamental and technical aspect
4 KB (685 words) - 04:24, 5 July 2008
-
...mplemented. A possible problem will be that they may implement a Ultra Low Power bluetooth protocol, which the FreeRunner may or may not be able to use.
2 KB (292 words) - 12:26, 31 August 2008
-
...ic (JBT6K74-AS(PI)) doesn't do any kind of drawing. It mainly controls the power states and the format in which data is shifted out to the LCD (timing), but
... this] and [http://datasheets.maxim-ic.com/en/ds/MAX1464.pdf this] - total power draw should be 730 mW (max).<br/>
1 KB (244 words) - 10:31, 13 July 2008
-
EFL's Evas is a powerful and power sparing canvas drawing library. It can be OpenGL accelerated. Python/Ruby b
23 KB (3,599 words) - 09:27, 23 August 2008
-
....ucsb.edu/AODV/aodv.html AODV] is a routing protocol very light in term of power and energy consumption; it provides at the support for mobility.
5 KB (837 words) - 14:31, 10 July 2009
-
More good news: OM 2007.2 build 20070825 seems to have sorted out the power management problem: leaving the phone 'on' with Full PM enabled overnight a
...in the handset, perhaps I have a poor signal here and the radio needs more power than other people?
7 KB (1,175 words) - 10:46, 3 July 2009
-
...by is seen by many to be an excellent compromise between the terseness and power of Perl and the readability and ease of learning of Python.
22 KB (3,625 words) - 17:49, 23 November 2009
-
sleep: invalid time interval `\'Power'
sleep: invalid time interval `power-off\''
24 KB (3,683 words) - 19:39, 20 April 2009
-
* Driver di Power Management: https://svn.openmoko.org/trunk/src/target/kernel/patches/gta01-
* Driver di Power Management: https://svn.openmoko.org/trunk/src/target/kernel/patches/gta01-
14 KB (2,042 words) - 07:19, 9 July 2008
-
* How robust is gconf in case of (disk) memory shortage or sudden power loss situations?
733 B (107 words) - 07:37, 19 July 2009
-
To save power have WiFi able to wake up and check for a designated SSID then sleep again
*Variable TX power, to the minimum needed to connect to the AP.
920 B (168 words) - 14:36, 10 July 2009
-
Both are quite small and have a low power usage. The pressure sensor has more uses than the humidity sensor, and has
2 KB (273 words) - 21:56, 14 August 2007
-
...ecial file in such a big archive will cost an enormous amount of computing power. So the only options are to either pack every file separately or to pack a
6 KB (947 words) - 12:27, 31 August 2008
-
... Button | AUX button]] and then press the phone's [[Neo1973 Power Button | POWER button]].
...therwise the screen will only flash white for a second and the phone won't power up.
12 KB (1,960 words) - 08:35, 10 February 2012
-
...ever specific task it was up to and then can shut off. Is this infeasible power wise?
3 KB (476 words) - 21:47, 5 April 2010
-
...arioptic.com/en/products/products01.php Liquid Lens] camera for small, low power, electronically controlled autofocus. <br />Also available as part of an SM
5 KB (833 words) - 14:09, 1 May 2012
-
| Power Management
9 KB (1,188 words) - 17:02, 19 June 2010
-
...liarlo". Alcuni eventi in grado di fare questo sono: premere i tasti AUX o POWER, il riconoscimento di un cavo USB.
# (sleep 1; echo mem > /sys/power/state) & exit
7 KB (1,057 words) - 09:41, 12 January 2010
-
...ing; but the neat thing will be true navigation, and I'm not sure how much power this takes.
6 KB (967 words) - 12:11, 28 August 2008
-
...d be great for allowing wireless too. And pcmcia cards tend to be very low power.
a sharp picture. It consumes about 5W and its light power is about 6 lumen. As the sharpness does not depend on
16 KB (2,676 words) - 18:32, 27 September 2009
-
...olare, appena accanto al connettore USB. [[Neo1973 Power button/it|Neo1973 Power button]] il bottone Ausiliario è rettangolare in alto a sinistra del telef
A: Non ci sono state parole per questo per molto tempo, ma leggi [[Neo1973 Power Management#Approximate_power_draw_of_various_subsystems|queste stime]] per
18 KB (2,655 words) - 08:54, 16 August 2009
-
... need for an USB hub for connection of more devices, and no cost/logistics/power consumption of USB interfacing. The disadvantage is lower speed, which is i
...either directly sense the sleep mode and adjust their behavior or directly power the hungrier additional electronics - eg. LEDs - only when not sleeping, fu
4 KB (603 words) - 17:54, 21 October 2008
-
O Power On
o Power Off
6 KB (834 words) - 23:02, 22 August 2008
-
A flexible converter allowing you to recharge the Neo1973 with power from many DC sources such as other devices chargers.
...where, with a micro-switch that induces hibernation on closing to conserve power.
7 KB (1,219 words) - 02:41, 5 June 2009
-
# [[Neo1973 Power Button|Botón de prendido]]
* Power button press
13 KB (2,066 words) - 10:45, 23 August 2008
-
Pulsando el botón de encendido ''power'' (dependiendo de la versión del programa de arranque ([[u-boot]]) tienes
Una vez pulsado el botón de encendido ''power'' durante el tiempo necesario, el vibrador se accionará durante un corto e
10 KB (1,664 words) - 09:37, 12 January 2010
-
|2 mpix camera, 4 buttons (power, volume, ringer, main menu), [http://en.wikipedia.org/wiki/Accelerometer ac
5 KB (656 words) - 12:41, 31 August 2008
-
I don't think there is any effect. All power and SDR related software is on the baseband
937 B (157 words) - 22:59, 25 April 2009
-
1a.A microswitch inside the stylus sleeve triggers power on/wake from hibernate when the stylus is removed (via an ACPI event, likel
3 KB (446 words) - 16:48, 24 July 2008
-
=== device power state ===
* modem responding to AT commands, in some power saving mode
8 KB (578 words) - 23:45, 20 August 2008
-
...controller, MMC/SD host, [[I2C/it|I2C]] e IIS interfaces, Memory & Clock & Power management controllers, RAM.
...ato anche PMU) Falsifica la carica della batteria (fissa ad 88%), il tasto POWER, etc. Contiene anche RTC, non utilizzato da Linux.
23 KB (3,056 words) - 11:18, 26 September 2008
-
... phone, depending upon the amount of power needed, the environment and the power produced by the panel.
...ld make sense for extended computing operations outdoors or places without power. For people roaming about the wilderness/bush this might be an option. If i
10 KB (1,666 words) - 14:58, 30 July 2008
-
|Power user/app development
5 KB (667 words) - 01:27, 8 July 2009
-
# [[Neo1973 Power button/ru | Кнопка включения]]
* Нажатие кнопки Power button
19 KB (1,077 words) - 10:45, 23 August 2008
-
...pins connected to a chained bus system like the I2C or/and perhaps USB and power connectors inside. So someone can easy solder and glue his extension into a
3 KB (483 words) - 12:20, 31 August 2008
-
...des évènements actuellement activés sont: AUX ou pression sur le bouton POWER, détection d'un branchement de câble USB.
# (sleep 1; echo mem > /sys/power/state) & exit
9 KB (1,461 words) - 09:40, 12 January 2010
-
9. USB Host Power<br/>
A NXP PCF50633 04 N3 is used for [[Neo1973_Power_Management|power management]].
24 KB (3,052 words) - 11:14, 3 February 2009
-
... нажмите Enter (=aux), а для изменения Пробел (=power). По умолчанию загружается Openmoko.
14 KB (484 words) - 13:24, 9 October 2009
-
...prod_summary.jsp?code=MPX4100 Freescale MPX4100 (was Motorola)] - needs 5V power supply, 11 x 11 x 6 mm
The sample rate should be application adjustable to conserve power.
5 KB (747 words) - 19:10, 30 September 2009
-
...eylaunchrc'': my personal keylock application to AUX and suspend helper to Power button
9 KB (1,461 words) - 11:37, 30 January 2012
-
A: No suitable low power open source WiFi device was available when the [[Neo1973]] was designed. A
...st un petit bouton circulaire, juste à coté du connecteur USB. [[Neo1973 Power Button|Bouton d'allumage du Neo1973]]
20 KB (3,271 words) - 15:45, 22 December 2008
-
...uld do all the above stuff. This is just a small shell hack which uses the power of sed to inject packages into the the final image. Use at your own risk an
14 KB (2,176 words) - 09:19, 11 March 2009
-
*The Assistance Server has a good satellite signal, and lots of computation power, so it can compare fragmentary signals relayed to it by cell phones, with t
3 KB (566 words) - 21:57, 13 September 2008
-
AT%EM=2,7 Power Parameters
|8 || txlev || Transmit Power Level ||
32 KB (4,766 words) - 06:34, 12 February 2012
-
|playing around, Power Management, Start up speed
897 B (119 words) - 11:54, 18 October 2008
-
|Power management
4 KB (601 words) - 14:33, 21 May 2010
-
Hold the ''Alt'' button whilst pressing the ''Power'' button
Just press the ''Power'' button
28 KB (3,646 words) - 13:53, 22 October 2008
-
[http://wiki.openmoko.org/wiki/PCF50606 Power Management Unit]
[http://wiki.openmoko.org/wiki/Neo1973_GTA01_Power_Management Power Management]
3 KB (418 words) - 19:01, 17 September 2008
-
=== Power Up the GSM Modem ===
Power up the GSM modem using "AT+CFUN=1".
8 KB (1,335 words) - 09:47, 19 July 2009
-
#REDIRECT [[Talk:Neo 1973 GTA01 Power Management]]
50 B (6 words) - 21:09, 13 July 2008
-
#REDIRECT [[Neo 1973 GTA01 Power Management]]
45 B (5 words) - 21:01, 13 July 2008
-
# Now, on your Openmoko, hold the AUX button while pressing the Power button for 5 seconds
# Now, with your Freerunner unplugged hold the AUX button while holding the power button (for about 5 seconds) until the BOOT menu appears. Now connect the F
23 KB (3,678 words) - 17:29, 13 February 2012
-
|Linux power user.
2 KB (285 words) - 04:19, 10 December 2009
-
...had to keep pressing the AUX button to prevent the phone from idle-timeout power-offs.
1 KB (168 words) - 02:42, 15 August 2007
-
|'''Power Management'''
|Power and Aux
1 KB (152 words) - 15:10, 1 August 2007
-
bias (power for mic) 2K2 from +3.3v(wolfson codec)
3 KB (491 words) - 10:03, 2 September 2009
-
|
power
...l/
power</pre> and turn on with: <pre>echo 0 >/sys/class/backlight/gta01-bl/
power</pre>
916 B (133 words) - 08:13, 27 February 2009
-
...ot result in a proper installation supporting the device. There will be no power management, no GSM, no GPS, etc. This is just for hacking and fun.}}
2 KB (271 words) - 15:05, 26 November 2008
-
Press and hold power button, choose Screenshot from menu :)
2 KB (276 words) - 05:23, 21 July 2009
-
== Power/PM/tray icon ==
Module for mb_panel -- should use /proc/apm to look at Power remaining. Reference is [http://alumnit.ca/~apenwarr/apmd/index.html here]
5 KB (837 words) - 13:52, 28 October 2008
-
====
Power Management ====
<HV3 packets> <u-law log> <A-law log> <CVSD> <
power control>
15 KB (1,996 words) - 13:23, 26 February 2009
-
... can easily hear everyone else, without raising their voice. (transmission power)
They get best (momentary) gain from the system by simply turning their radio power up all the way, and ignoring any traffic by stamping on it.
3 KB (445 words) - 21:58, 13 September 2008
-
* Power: 2 × AA battery or via AC adapter
3 KB (410 words) - 22:49, 31 August 2008
-
'8.29 Power class
13 KB (2,028 words) - 16:18, 4 June 2008
-
Powered off the Neo, powered on with AUX+POWER go give a reduced boot menu.
6 KB (981 words) - 10:30, 29 December 2008
-
* Поддержка кнопок AUX и POWER для навигации в меню
1 KB (76 words) - 12:53, 9 October 2009
-
===Power===
...ower is attached the AA's will just power the USB ports. If your Neo needs power in case of emergency you can always plug the 'Neo to Computer' USB cable in
2 KB (321 words) - 16:28, 1 October 2007
-
====Shutting down: "themfish power down" ====
6 KB (920 words) - 13:31, 3 December 2008
-
#Power up the bluetooth radio
4 KB (639 words) - 20:15, 12 September 2008
-
* Power button press
...t 30mA additional standby current, since we cannot properly switch off the power supply to the S3C2410 PLL's. There is nothing we can do to change this wit
4 KB (649 words) - 11:25, 7 September 2008
-
* To prevent interference with the GSM modem you have to expicitly power-up and register the modem by toggeling the "GSM State" checkboxes.
8 KB (1,255 words) - 15:31, 1 December 2010
-
- After power-on, the first time that the 0-16 counter is started (whether triggered by r
4 KB (708 words) - 15:59, 29 August 2007
-
* ''Automatically power-on the gsm chip and register to a network on launch''
8 KB (1,283 words) - 08:44, 19 September 2008
-
At 40mA (measured input power) an hours charge is 40mAh, or 3% charge.
1 KB (220 words) - 06:58, 29 August 2008
-
* Press and hold {{power}} to get a pop-up menu that includes not only power settings, but screenshot, and landscape orientation
... reboots. Only unusual thing was first few boots today were without a USB power source—hard to image that is the cause, especially as it is tethered
8 KB (1,308 words) - 12:44, 9 September 2008
-
...нужного пункта необходимо нажать кнопку POWER.
neo1973 power-off - switch off the phone
33 KB (1,767 words) - 13:35, 1 February 2010
-
<small-caps>POWER</small-caps>
30 B (3 words) - 13:41, 23 August 2007
-
...ry-backed computer (either a notebook or a computer on a UPS), in case the power goes out. And, if you don't have a debug board or live near someone who has
1 KB (258 words) - 15:23, 12 October 2007
-
|Cámara de dos megapixes, cuatro botones (power, volume up, volume down, mute, Home), [http://es.wikipedia.org/wiki/Aceler%
6 KB (856 words) - 21:59, 29 August 2008
-
...ct an option you have to press enter (=aux) and to execute it, hit space (=power). The default selection will boot Openmoko.
9 KB (1,413 words) - 20:42, 4 March 2010
-
'''4)''' Ideally this will slip right into the OpenMoko power management scheme. Preferably neod and/or the dialer will *lock* the scree
...cket, or otherwise subject to spurious inputs. It is not intended to save power.
10 KB (1,662 words) - 20:14, 17 July 2008
-
=== Power management ===
2 KB (320 words) - 22:16, 30 August 2008
-
...functions which fall outside the scope of [[gsmd]] such as the buttons and power management. It is considered a temporary, throw-away solution [http://svnwe
* [[Power management menu]]
1 KB (181 words) - 08:24, 19 July 2009
-
# Push the power button of your Neo1973 to swithc it on
3 KB (468 words) - 09:23, 10 February 2012
-
libgsmd-tool: <# # Power-On>
4 KB (679 words) - 00:39, 4 October 2007
-
Articles for '''power users''' of the Openmoko smartphones.
... programs, tweak Linux configuration files. From the [[Personas]] page the Power user belongs to this category.
19 members (8 subcategories, 0 files) - 21:28, 12 September 2008
-
...he logical mode of the USB port, the Neo FreeRunner can provide 5 volt USB power to an attached USB device. To enable this (not available on Neo 1973):
Note that in full USB host mode the FreeRunner will power the external device. To avoid draining the battery use a powered USB hub, t
11 KB (1,732 words) - 18:37, 2 December 2011
-
Here are some non-specific requirements for Openmoko regarding power management of the phone. There are three general classes of requirements:
# The phone should save power as much as possible to keep run times as long as possible.
4 KB (647 words) - 08:28, 19 July 2009
-
Now you must power up the GPS-chip by opening the "Settings" application and setting the GPS e
18 KB (2,840 words) - 02:54, 27 January 2012
-
...]] || Fonctionne || (Aka PMU) Fakes the battery charge level (set at 88%), POWER button, etc. Also contains an RTC, also unused by Linux.
|Boutons || Fonctionne || Enter is the AUX button, Space is the POWER button. Wired to on-chip GPIO and PCF50606.
33 KB (4,907 words) - 07:50, 14 September 2011
-
Located behind the POWER button at the bottom-right of the device.
Located behind the POWER button.
585 B (83 words) - 22:04, 21 August 2008
-
If the device suspends during those 60 seconds the kernel will power down the gps and the agps data will be lost.
If you don't use the fso resouce, just make a call to "om gps power" instead.
4 KB (646 words) - 21:32, 18 September 2012
-
# Remove the USB cable and the Battery for a moment to remove all power from the Neo, or
...lect "Shutdown device" (Note: "Restart Device" does not help - you need to power it down completely!)
13 KB (2,216 words) - 03:56, 12 October 2009
-
* Activate power down when the power button is pressed long by adding the following to /etc/freesmartphone/oeven
# Power-off Handling
2 KB (335 words) - 07:41, 24 February 2009
-
also presessing the power or the power in combination with the AUX key fails to cause the hardware to appear on -
4 KB (575 words) - 00:10, 25 September 2007
-
... una, occorre premere Invio (=aux) e per eseguirla, la barra spaziatrice (=power). Quindi, così come appare la schermata di avvio, basterà premere diretta
4 KB (529 words) - 13:42, 22 August 2009
-
in the configuration and power management area.
* Power state/config of GSM
2 KB (296 words) - 13:52, 14 November 2007
-
* Gleichzeitig die AUX und Power-up gedrückt halten, um ins Bootmenü zu gelangen.
... zu gelangen, müssen Sie gleichzeitig den [[Neo1973 AUX Button]] und den Power Button gedrückt halten.
26 KB (3,484 words) - 13:34, 1 February 2010
-
Now, you haven't actually changed anything yet - if you power cycle the phone at this point, the partition table will go back to the way
9 KB (1,405 words) - 08:22, 10 February 2012
-
* GTA02v3 power supply flaw found, GTA02v4 needed - DONE
* USB Host function with power
5 KB (778 words) - 11:15, 4 September 2008
-
Druk eerst op de AUX knop en blijf deze ingerukt houden, druk daarna op de Power knop en houdt deze ook ingedrukt. Laat vervolgens de AUX knop los. U ziet n
6. Power off (Uitschakelen)
8 KB (1,290 words) - 09:26, 12 January 2010
-
...puyer sur Enter (=aux) et pour l'exécuter appuyer sur la barre d'espace (=power). En gros, au démarrage, appuyez sur la touche Espace et tout se charge.
3 KB (440 words) - 22:19, 21 September 2008
-
Power on gsm modem and attach modem to serial line:
4 KB (635 words) - 08:25, 25 July 2010
-
* The Power user
2 KB (266 words) - 21:10, 14 September 2008
-
De [[Neo1973 Power Button|aan/uit knop]] is te vinden aan de rechterzijkant (onder) van het to
* Aan/uit knop 1 seconde indrukken: opent het [[power management menu]].
15 KB (2,428 words) - 09:44, 12 January 2010
-
*Low power consumption
4 KB (528 words) - 12:43, 10 June 2010
-
** [[Neo1973 GTA01 Power Management | Neo1973 GTA01 energie management (en)]]
424 B (53 words) - 22:53, 30 August 2008
-
* Supply USB 5v in Host mode using usb power switch AAT1275IRN-5.0-T1
** DISABLES the path for USB power to charge the battery
4 KB (630 words) - 14:43, 8 March 2010
-
...iction of remaining battery power and time until shutdown, based on actual power dissipation.
...nnot be turned on until the FreeRunner has booted, and booting through USB power alone does not work on A5 and early A6 devices.
7 KB (1,234 words) - 15:07, 24 October 2014
-
The [[Neo1973 Power Button|power button]] is on the lower right-hand side, and the [[Neo1973 AUX Button|AUX
Just hitting the power button (depending on your [[u-boot]] version you have to press for >= 5 sec
14 KB (2,049 words) - 09:43, 12 January 2010
-
neo1973 power-off - switch off the phone
=== Power-off ===
11 KB (1,733 words) - 08:04, 10 February 2012
-
If the U-Boot menu is on the screen, the phone will power off when there hasn't been activity for a while. This is not nice if you ar
To stop in the NAND menu, press and hold the AUX key after pressing the power button at startup. In recent versions of U-Boot (builds from august 5 200?)
3 KB (443 words) - 07:59, 10 February 2012
-
'''phoned''' will be a replacement for [[neod]]. the aux menu, power menu and display locking functinality will be outsourced in normal applicat
* power button pressed/released
1 KB (156 words) - 08:26, 19 July 2009
-
pmu is not debounced, the other one for power (same wiring, other transistor) is
1 KB (251 words) - 05:08, 8 July 2008
-
...including test & hobby hardware. Would require use of a standard internal power & communications bus. Could be left empty with blank cover or house cameras
901 B (135 words) - 19:04, 12 April 2010
-
child.expect(['Power-On','ERROR','OK'])
3 KB (458 words) - 07:49, 19 July 2009
-
...n Optionen auswählen. Mit ENTER(=aux) kannst du auswählen und mit SPACE(=power) ausführen.
5 KB (650 words) - 09:34, 11 July 2009
-
...t 4-5 hours of battery life when idle - this will improve as general GTA01 power management improves
* Press "power" to activate screen lock; press "aux" to release screen lock
3 KB (383 words) - 14:34, 11 December 2011
-
O Power On
o Power Off
7 KB (957 words) - 23:02, 22 August 2008
-
* Power handling: 1 Watt
* power consumption:
3 KB (532 words) - 15:45, 23 May 2009
-
Bei dieser Halterung ist ein Drücken des "Power-Buttons" allerdings nicht mehr ohne Stift möglich (siehe Fotos).
1 KB (191 words) - 14:55, 27 September 2008
-
...еключателей: Airplane mode, Phone profiles, Power settings and Power buttons.
To power up Bluetooth module, switch the "Bluetooth radio" toggle to "On". After tha
55 KB (3,991 words) - 09:23, 17 October 2010
-
Alex reportedly solved the problem going into Illume Settings, then Power, and setting to OFF the 2 parameters. He still gets the screensaver, but ca
8 KB (1,303 words) - 12:28, 4 June 2009
-
* power supply
Comming soon: power supply and a blind to cover the cables, stay tuned :)
1 KB (199 words) - 10:26, 6 July 2008
-
|(Pending final hw, eg. low-power LEDs)
1 KB (143 words) - 15:22, 14 May 2008
-
...e two buttons on the rim of the case (one bicolor [blue|orange] behind the power button, 1 unicolor [red] behind the aux button)
* USB Host function with 500mA power, allowing you to power USB devices for short periods (will drain the FreeRunner battery faster)
3 KB (498 words) - 12:43, 20 December 2011
-
...or 1800/1900. So the next question then is... does the neo use this higher power on those frequencies? --[[User:Len|Len]] 06:04, 11 January 2008 (CET)
2 KB (385 words) - 05:04, 11 January 2008
-
...le for managing the CPU frequency. It's commonly used in laptops to reduce power usage when idle.
* [[Neo1973 GTA01 Power Management]]
7 KB (1,176 words) - 01:27, 13 February 2008
-
...f you spend too much in lopp waiting till the pipe is ready, this uses CPU power and drains the battery faster. If you check seldom, this makes the output u
7 KB (1,093 words) - 15:53, 16 June 2009
-
* <s>Building an enhanced Power source for the GTA01</s>
2 KB (369 words) - 12:25, 23 January 2009
-
04 Mar 2008 850 Band re-work and add IR resistor for power saving<br>
04 Mar 2008 850 Band re-work and add IR resistor for power saving<br>
30 KB (4,358 words) - 09:08, 23 August 2008
-
...ually to close a fullscreen application on distro that use aux to lock and power to suspend!
Luckily SHR has restored the use of power button to launch a dialog that make you kill applications or poweroff the s
12 KB (2,154 words) - 21:50, 30 July 2009
-
...current of all modules which are in sleep/suspend mode connected these two power channels. So we have to know the current consumption of following modules w
*** Power key:[OK]
2 KB (270 words) - 08:25, 19 July 2009
-
...ation need long standby time, will need wake up from wireless function for power saving. There is a sleep mode that Ar6k supported for wake up from wireless
9 KB (1,260 words) - 12:08, 5 November 2009
-
...r from a USB connection, in accordance with the standard. This is not much power. The Neo almost always draws more than 100 mA to operate. So the battery ca
...nnection as a "smart" USB connection (by communicating with the host about power availability) or as a standard Openmoko charger (by recognizing an expected
8 KB (1,262 words) - 08:01, 10 February 2012
-
[[Category:Power]]
16 members (0 subcategories, 0 files) - 11:05, 2 January 2010
-
...ried a few things including setting the rate with iwconfig and making sure power management was off, but that didn't help. I installed [[Wmiconfig]] and did
wmiconfig -i eth0 --power maxperf
21 KB (3,280 words) - 00:22, 27 September 2010
-
* Defaults to 0, GTA02 USB hardware is configured to be a device, no power is generated for USB, charging is enabled and host 15K pulldowns are remove
... to put the GTA02 USB hardware into host mode, so it starts to generate 5V power, disables charging from USB, and applies 15K pulldowns to USB D+ and D-
14 KB (2,211 words) - 20:53, 27 October 2009
-
* Brining power of Input methods to freedesktop.org
5 KB (864 words) - 03:55, 12 October 2009
-
...2Bv5 || Moko8 || Yes || Had problems with OM2007.2 occasionally failing to power up the antenna, and with losing GSM connection necessitating a reboot every
9 KB (1,289 words) - 10:29, 16 November 2009
-
...按下[[Neo1973 AUX Button]] 你可以循環使用選單項目。使用''POWER''按鈕選取其中的項目。
13 KB (950 words) - 13:37, 1 February 2010
-
...ually a bad thing, since there is a great different between PC and Neo1973 power. Also, compiling for x86 targets seems to be a bit faster.
2 KB (316 words) - 20:50, 12 September 2008
-
... from happening, press the Power button to get the Power menu, then choose Power Management: Disabled.
* neod takes care of basic powermanagement, supports AUX and POWER buttons for navigation / additional functionality
15 KB (2,295 words) - 13:59, 23 September 2011
-
... power consumption 2. Utilities 3. GTA01/GTA02 issues || [[Media:power.pdf|Power]]
6 KB (741 words) - 10:42, 5 December 2008
-
* openssh-server - we want to connect to our device and we have enough power to not need to use dropbear
14 KB (2,125 words) - 23:28, 31 August 2010
-
|align="right"|[[Image:System_boot.png|border|300px]] <br /> Power On
4 KB (503 words) - 12:40, 22 October 2008
-
*LED- LED 指示器位於 Aux/Power 按鈕下。
* Power/Aux 必須配置背光燈
18 KB (1,376 words) - 10:47, 23 August 2008
-
==== Power Management ====
3 KB (487 words) - 15:51, 26 April 2008
-
Power Off
4 KB (467 words) - 12:15, 27 November 2010
-
/sys/devices/platform/gta02-led.0/leds/gta02-power:blue/
/sys/devices/platform/gta02-led.0/leds/gta02-power:orange/
7 KB (1,080 words) - 02:31, 3 May 2009
-
...手機的[[Neo1973 AUX Button | AUX 按鈕]] 接著按住手機[[Neo1973 Power Button | 電源按鈕]].
Power off
8 KB (467 words) - 14:34, 22 October 2008
-
...手机的[[Neo1973 AUX Button | AUX 按钮]] 接着按住手机[[Neo1973 Power Button | 电源按钮]].
Power off
8 KB (467 words) - 06:06, 23 June 2010
-
...]]: ''How about a double-blink (perhaps short+long combo)? This might save power.''
...FreeRunner when it's suspended? (Why not?) I think I can see some light in power button when FreeRunner is suspended and it's dark (using SHR-U). --[[User:T
3 KB (522 words) - 10:44, 5 July 2010
-
6. Power off (關機)
9 KB (811 words) - 09:30, 12 January 2010
-
6. Power off (关机)
8 KB (759 words) - 09:29, 12 January 2010
-
*LED- LED 指示器位于 Aux/Power 按钮下。
* Power/Aux 必须配置背光灯
18 KB (1,375 words) - 10:47, 23 August 2008
-
# Remove the USB cable and the Battery for a moment to remove all power from the Neo, or
...lect "Shutdown device" (Note: "Restart Device" does not help - you need to power it down completely!)
13 KB (2,131 words) - 12:42, 9 October 2009
-
*User Interface Navigation- Touch screen on LCD, 2 control “buttons”, 1 Power button, 1 Aux for 911 emergency call
...st mode switch-able (to be used for software downloading), provide host 5v power
28 KB (4,142 words) - 08:46, 23 August 2008
-
* Auto power on test point
* Modem power on test point
7 KB (1,089 words) - 03:27, 23 October 2008
-
... level device control service manages peripheral control, i.e. controlling power for individual subsystems such as
* Backlight brightness and power,
7 KB (975 words) - 12:23, 22 October 2008
-
* Set new settings to remote phone (change power mode, audio profile, turn device off)
3 KB (443 words) - 08:44, 19 July 2009
-
...NAND controller, MMC/SD host, [[I2C]] and IIS interfaces, Memory & Clock & Power management controllers, RAM.
...50606]] || Works || (Aka PMU) Fakes the battery charge level (set at 88%), POWER button, etc. Also contains an RTC, also unused by Linux.
34 KB (4,772 words) - 17:01, 23 February 2009
-
Select Display and Power Management<br>
Press power button
933 B (133 words) - 13:22, 17 July 2008
-
DC Power Supply
GSM 900 Power level 5<br>
494 B (73 words) - 04:38, 8 July 2008
-
JTAG communication failure, check connection, JTAG interface, target power etc.
6 KB (482 words) - 22:24, 20 August 2008
-
O Power On
o Power Off
8 KB (581 words) - 23:46, 20 August 2008
-
Power status
Battery power below 20% -> LOW-POWER
4 KB (608 words) - 22:24, 30 August 2008
-
DC Power Supply
PCS 1900 Power level 0<br>
3 KB (521 words) - 05:24, 8 July 2008
-
O Power On
o Power Off
8 KB (585 words) - 23:46, 20 August 2008
-
...e two buttons on the rim of the case (one bicolor [blue|orange] behind the power button, 1 unicolor [red] behind the aux button)
* USB Host function with 500mA power allowing you to power USB devices for short periods (will drain the FreeRunner battery faster)
3 KB (518 words) - 20:59, 6 February 2010
-
bias (power for mic) 2K2 from +3.3v(wolfson codec)
4 KB (645 words) - 07:16, 26 September 2011
-
DC Power Supply
GSM 900 Power level 5<br>
3 KB (535 words) - 04:00, 11 June 2008
-
DC Power Supply
DCS 1800 Power level 0<br>
3 KB (542 words) - 03:17, 11 June 2008
-
DC Power Supply
PCS 1900 Power level 0<br>
3 KB (540 words) - 03:19, 11 June 2008
-
DC Power Supply
GSM 850 Power level 5<br>
3 KB (515 words) - 03:20, 11 June 2008
-
...NAND controller, MMC/SD host, [[I2C]] and IIS interfaces, Memory & Clock & Power management controllers, RAM.
...50606]] || Works || (Aka PMU) Fakes the battery charge level (set at 88%), POWER button, etc. Also contains an RTC, also unused by Linux.
31 KB (4,439 words) - 22:04, 12 September 2008
-
* If the Neo1973 does not turn on automatically at this point, hold the power button for 5 seconds
...ricked" one will not. Note that there will be no visible feedback from the power-button press on a bricked device.
10 KB (1,572 words) - 14:15, 22 October 2008
-
... level device control service manages peripheral control, i.e. controlling power for individual subsystems such as
* Backlight brightness and power,
11 KB (1,536 words) - 10:50, 2 February 2009
-
#Power up the bluetooth radio
...c and ephemeris data that would be held in the extra flash storage when we power up the GPS. Time is available from the local clock, and we can save locatio
16 KB (2,538 words) - 15:39, 24 July 2010
-
====Power Management====
2 KB (196 words) - 18:11, 22 October 2008
-
=====Power=====
*[[Neo1973 GTA01 Power Management]]
1 KB (157 words) - 13:52, 26 February 2009
-
...r by changing (GPS-)location. Also I'd probably still like to have my "low power" profile still on guard.
3 KB (518 words) - 23:47, 8 July 2008
-
...estaurant. Don't forget to bring your FreeRunner and/or notebook (wifi and power available). More detailed information on the [http://phpugdo.de PHP Usergro
1 KB (206 words) - 04:47, 21 April 2009
-
...es logiciels disponibles sur l'ordiphone n'en font un outil adapté qu'aux power users et aux développeurs, mais pas au consommateur moyen. La liste de cou
... le bord de l'appareil (une est bicolore [bleu|orange] derrière le bouton power, 1 unicolore [rouge] derrière le bouton aux)
4 KB (641 words) - 17:19, 29 September 2008
-
..., the modem was detected immediately after switching to usb host mode with power. [[User:MicVM|MicVM]], 2 June 2009
638 B (100 words) - 11:25, 4 November 2009
