Search results

...audio you need a special alsa state file and we provide a link to one that works below (SHA1:55888a699e969c5e2c4690e6aff47ccad7ad0f3d). It can be used to pu

It works the following way:

... try first and you are not willing to spend the time finding out which one works for you, then this page is not meant for you and you should be looking for ...ings in engineering (and life), we have to find a point in the middle that works well - we will try hard to do it.

This only works with the [[QT2410]] development board, since it has the corresponding recei

...enOCD 0.2.0, the config file format has changed. You can start from this ("works for me"): ...table cross-gdb (a gdb that runs on your host architecture, e.g. i386, but works with code for arm). In OpenEmbedded, you can build such a cross-gdb by usi

... actually that you can give it a list of devices and it will pick one that works.

=== [[:Template:Works]] === !<FONT COLOR="#FF6600">Works</FONT>

... addressbook, personal notes, representing networks who knows whom and who works for whom and on which project, ...), multiple entries for each field (e.g.

[http://opendict.idiles.com/ opendict] works with debian :<nowiki>For now, `sm ''` kind of works; it isn't available in Openmoko though, you need to ar -x the sm_*_armel.de

...packages should now install, the bug was finally found.. Let me know if it works for you! .../risto.kurppa.fi/blog/kustomizer-02-for-200812/ version 0.2 released]. GSM works again. Many fixes done - now Kustomizer can give you two different configur

...andby mode works most of the time, and the wake-up-from-call functionality works, too. Some settings need to be changed. For details, have a look [[GTA01Sta

However, even if the bad-block skipping works, sjf2410-linux only supports the extremely slow parallel-port based JTAG a

... (speed)] !! Works w/ [[Qi]]? version? !! Works w/ [[u-boot]]? version? !! Works w/ Linux 2.6.34? !! 2.6.39

In my experience this works but I have to fiddle with the connection a bit before I get stereo output. NOTE none of this works with GTA02. Neo mode has disappeared, and none of the state files are GTA02

The [[Dialer|dialer]] now works!

...anually using GPS|outputs the altitude]] as well. This has been tested and works fine. [[User:AudriusA|AudriusA]] 21:44, 7 February 2008 (CET) The advantages of using RF for control instead of Infra-red this that it also works when furniture, walls, or doors are blocking the path between RF remote and

...it. I put my Openmoko development directory in /home/bryce/mokodev/ and it works great for me. You can feel free to do the same or put it anywhere else in y

The 3d Viewport works much like a first person shooter game. But instead of using the mouse to co

...s,en Logitech diNovo Mini] Works well, very portable and the touchpad also works just fine. Also has no problems with double letters. ... BT keyboard, scanned for BT address and ran the connect statement above. Works fine.

... Augmentation system; it is the US implementation of a DGPS technique that works over continental wide areas: SBAS or Satellite Based Augmentation System. ...llow changes that will break gps module usage restrictions - this way gpsd works, and all restrictions are preserved.

...ork (bb complained about my bbpath I think) ... but with your makefile, it works great!", "MokoMakefile rocks!", "Wow this build system is nice - it just se

... actually that you can give it a list of devices and it will pick one that works.

Here's my (Fox Mulder) /usr/bin/zhone-session file which works with xfwm and matchbox keyboard popup:

...arOne|Cellular One/Dobson Cellular]] - Their Prepaid Cellular page says it works with any GSM phone. However according to Wikipedia [http://en.wikipedia.or * [[Carriers/TMobile|T-Mobile]] - Works with Neo1973 using manual GSM commands w/prepaid SIM.

...one on the local terminal the keyboard is obscured so you can't exit. SSH works quite well. === Another derivated method : works like a charm for me ! ===

...hones starts a high quality recording exactly at the same time (the signal works like a clacker when filming). Alice will hear Bob in the normal phone quali

... inside the holder (visible when disassembled) is some kind of 'detector'. Works with USB adapter cable, external AC power supply, most likely car cirgarett

* [http://www.wormux.org/wiki/en/index.php wormux] (it works without 3d acceleration) the game is playable in 640x480 even if the icon p

|ARM920T core || Works || Already in mainline QEMU. |Serial ports || Works || Use the "-serial" switch (maybe be specified multiple times) to tell QEM

...t GPS errors for all these parameters while still making sure this sort of works, etc.) Wi-Fi proximity by MAC is rather basic concept.

... network providers to have proprietary phones etc... The way the US system works tends to cheapen the phone itself because there is more money in the sellin

{{note|For Windows XP USB RNDIS networking ''finally works'' as of Kernel 2.6.22.5-moko11 using the procedure described below.}} {{note|For Vista this procedure works with the 2.6.24 kernel that ships with the Neo FreeRunner. The initial SSH

...cording to the position of the Neo FreeRunner. It's just on c file, but it works very well.

Dialing currently works both [[Manually_using_GSM|manually]], and now with the nice shiny dialer!.

...ork (bb complained about my bbpath I think) ... but with your makefile, it works great!")

...ally knows enlightenment will kill me if he/she looks at the source but it works

... attached via USB cable and booted properly, not at the Boot Menu). If it works, then you can add permanent configuration or use more sophisticated setups Test if it works:

....htm Freedom Mini], apparently not manufactured anymore but still sold and works out of the box with Bluez' hidd. Has a spring-loaded hinge for squeezing a

== How it Works == ...opy and paste may not work depending on your terminal emulator. Commi just works or you can use [[NeoCon|neocon]] terminal emulator and add a per-character

haven't gotten past this step yet well see how / if it works. :) ... were removed). I have T-Mobile (US) with the $5.99 "tzones" addon, which works with Minimo as it supports HTTP proxy setups.

Circular scrolling works in a way similar to the iPod's scroll wheel: Move the two

B.A.T.M.A.N Advanced is the next generation implementation that works on the Ethernet layer instead of the IP layer. That way the mesh-net can be

... which are related to the MokSec (OpenMoko Security) project. The packages works under FSO, but have to work also on other distribution.

that stack. The program works with SHR, OM2009, OM2008.x, etc. too. Transverse Mercator projection (similar to Norton's Star Atlas) which works

# web browsing works

| Works well. For packages not in the repository, just ask for them to be added via

ssh-agent permit SSH passwordless login, and works by caching the key(that is encrypted on the filesystem)...so it's more secu

I tried [https://coherence.beebits.net/ Coherence] on the om2008.8 and it works as a MediaServer. (Tested with a PS3 as a MediaRenderer)

...a map. That's basically how the http://www.openstreetmap.org (OSM) project works.

...oo much for VariCAD, however loading only the parts you are concerned with works very good. CTRL+M1 is pane, SHIFT+M1 is scale and CTRL+SHIT+M1 is rotate. U

Works automatically.

...t fully build, as well as a working recipe for PhoneME Feature, which only works directly on the Neo1973 framebuffer (e.g. you'll have to stop Xfbdev).

...68i. This phone came with the Blazing Fireball 3G SIM 71234 O 4022, and it works with my FreeRunner. I have made and received calls and have received SMS t

* GPRS data access in the US works fine with Phase 1 phone and instructions on [[Manually_using_GPRS]]

Following method works independently of locale settings, but only for coreutils `date` on your fre First you have to make sure gps works on you neo. You can do that by following the steps in the [[Howto_Test_Your

GSM works so well because the towers are carefully planned. If nobody does anything bad, this all 'just works'.

...ork (bb complained about my bbpath I think) ... but with your makefile, it works great!", e "MokoMakefile rocks!".

Circular scrolling works in a way similar to the iPod's scroll wheel: Move the two

... you can replace <tt>root@192.168.0.202</tt> with <tt>moko</tt>. This also works for sshfs.

* [http://en.wikipedia.org/wiki/HTC_Universal HTC Universal] - dialer works [http://linuxtogo.org/~htcpxa/htcuniversal/index.html code:linuxtogo] [http * [http://en.wikipedia.org/wiki/HTC_Magician HTC Magician] - dialer works [http://linuxtogo.org/~htcpxa/htcmagician/index.html code:linuxtogo] [http:

|works mostly in Eschborn, so meeting in Frankfurt is fine

It actually works with dropbear, which is the default sshd on the Openmoko images.

...osedly all of them and supposedly seamlessly. Little is known about how it works but if it's not too kludgy it should run unmodified on any ARM linux. It is

=== cs mount camera (also works with c mount lenses) === ...is in worst shape every day. Please just tell us there is a camera in the works, Otherwise I will be buying a non-linux smart phone.

...rk at low level. It has help me to understand a lot how freesmartphone.org works. [[User:Risca|Risca]] * [http://www.mediawiki.org/wiki/Extension:GraphViz GraphViz] works with the commonly known dot language - it allows us to draw '''graphs''' us

| Learning how OpenSource software works, contributing to OpenSource

This is a hack, but works for me.

...it. I put my Openmoko development directory in /home/bryce/mokodev/ and it works great for me. You can feel free to do the same or put it anywhere else in y

...e messages needed to be read, then sent back to libgsmd-tool. It probably works properly when retrieving a single message. This problem showed itself by l

This method works only in GTK applications.

...eloped for handheld devices like iPAQ, Sharp Zaurus and Motorola A760, but works for Openmoko as well. Download and install according to the manual found in If that works then your Mac is routing the neo globally--if not see [[MacOS_X#Enabling_th

|i like understand how it works

[[VoIP]] also works best with international numbers. How a [[Dial Plan]] works depends on the users location and or provider.

qemu-neo1973 works see [[Talk:Openmoko_under_QEMU#FreeBSD_and_last_qemu...]]. Nothing else kno ...cessible to libusb-based applications such as dfu-util. The cdce(4) driver works "out of the box" with Openmoko's ethergadget interface, so you can ssh in,

I do not know how good or bad it works.

GSM works exactly this way. Everyone has their turn to speak. The cellphone tower han

...ling without having to set up custom tones for each phone book entry. This works really well on modern Nokias.

1. You can use dd to extract and overwrite your mtd partitions. This works particularly well for u-boot-env and splash providing the source device has 2. Hex editing the extracted mtd partition (u-boot-env) and trying to dd that works but the results are not what is expected. It appears that if one of the boo

# run your application! I used gpsdrive and it works better than my stand-alone GPS. Tested with RoadNav. Works great!

...sole output with gllin]]. The downloaded .ipk package can be installed and works not just on Openmoko but also on Qtopia.

...ask of what the [[Devirginator]] tries to do automatically (but not always works).

... yet, including gconf and evolution data server. python-openmoko is in the works for [[gsmd]] access etc. A recipe for PyWebKitGtk

[[Image:Usb keyboard-jej.jpg|thumb|left]]This [[Usb_keyboard|usb keyboard]] works directly under shr-testing with no changes except usb host device to host

# web browsing works

tangoGPS works fine to create track for Openstreetmap. However, it records and stores a tr

...gular QEMU monitor commands for removable media can also be used. The card works, however the on-chip host controller gave block length errors on heavy I/O

* GPRS data access in the US works fine with Phase 1 phone and instructions on [[Manually_using_GPRS]]. Use 'i

Current status regarding suspend: Suspending and resuming works, when you remove console=ttySAC0,115200 from bootargs_base (see this [http: ... as a cell phone (as a landline that doesn't ring but instead vibrates, it works ok).

* pre - Slow (100mA) charging, works in hardware.

...h each contact's phone numbers on the same line) with this SQL query. This works because the contactphonenumbers table has limited phone_type values. We can

| 1.2.0-moko9_r8 || SH1-included || no hangs || a bit buggy || works | 1.2.0-moko9_r13 || "good-for-sd-boot" || hangs || ? || works

* pre - Slow (100mA) charging, works in hardware.

Navit on FR works with maps in the size of less that 350MB. So split the larger areas in port

...e and you can use either USB, GPRS or bluetooth networking. This is how it works: * run your application! I used gpsdrive and it works better than my stand-alone GPS.

... test (hanging the antenna out of the window in my apartment) show that it works quite well. TTFF in 216 seconds, 6 satellites in view.

Editors note: This is the old bluez3 way, but it works. New bluez4 way will replace this.

...k NL-65AT MMCX (see [[GPS_antennas_for_neo1973]] for more information), it works astonishing good there.

**** Result: WORKS **** Result: Works

''<test... wow it works>'' 1.5) verify that arm-linux-gnueabi-gcc works:

is issued by the low-level hardware test but gllin works fine afterwards.

* http proxy works but authentication not tested yet (--[[User:cberger|cberger]] tested versio

...ded, can start it itself. Gllin could be replaced by any other driver that works with agreed pipe (currently /tmp/nmeaNP) and our dream is to drop the depen ...g a file with NMEA content to /dev/ttySAC1, so the detection and switching works.

04 Mar 2008 SD/MMC seems broken under Linux (same usage works fine on #51; u-boot can read from it)<br>

...ista with the Neo FreeRunner. No reports have been received on whether it works with other versions of Windows or with the Neo 1973. There are some report

On my GTA01v4b phone, the default standby functionality in the above snapshot works most of the time (but I just had another annoying hang after suspend :( (wh

of devices and it will pick one that works, e.g.,

| Learning how OpenSource software works

...Bv4 || Moko1 || YES || Registered immediatly after entering PIN. Works after that. No /tmp/gsm.log appears || NO ...dafone d2 || 200x || GTA02 || Moko 6 || No || Does not register, pin entry works, net scan also. || No

Grid with a picture, which shows how the "flipping" works. Tiles are two sided, with a grey and a white side, and clicking "flips" th

* openmoko-today rewritten; works as application launcher and task manager as well

This kernel doesn't work for gta02, but the kernel from Om 2008.9 works good.

command, or locating the next image - works great for flashing a new

Current status regarding suspend: Suspending and resuming works, when you remove console=ttySAC0,115200 from bootargs_base (see this [http: ... as a cell phone (as a landline that doesn't ring but instead vibrates, it works ok).

...of PCBA test is make sure the surface mount quality and the main component works properly

... and the commit history for the patch is '''erased''', not reverted. This works great for local use, since the patch stack retains the information needed t

===How it works?===

|ARM920T core || Works || Already in mainline QEMU. |Serial ports || Works || Use the "-serial" switch (maybe be specified multiple times) to tell QEM

...o not work, but that a 3.5mm Stereo Audio Adapter for Motorola MPx200/E398 works well, as well as the generic Radio Shack 274-004. You will also want to swi ... ...) and the V-360 have a compatible configuration. The HS-120 (Motorola) works without problems (mic untested).

|ARM920T core || Works || Already in mainline QEMU. |Serial ports || Works || Use the "-serial" switch (maybe be specified multiple times) to tell QEM

...evelopers can release projects, so that installing a new application `just works out of the box'. It is a similar concept to the [http://www.ubuntu.com/comm

# run your application! I used gpsdrive and it works better than my stand-alone GPS. Tested with RoadNav. Works great!

...re welcome. It is likely it will be some months before any 2008.x release works on the 1973. In the mean time, users are encouraged to use 2008.2 or FSO.

Works={{Works on Debian}}

{{Template:Works on Android}} {{Template:Works on Debian}}

## Another confirmation that this works. You may use the computer-USB cable or the AC adapter. I held AUX, plugge

...for _''at least 30 minutes without moving or touching it''_. (a large mug works well as a stand) Do not stand over it either, your blocking those precious

...s to abort calls after a few minutes. Calling again immediately afterwards works, though. ...s to abort calls after a few minutes. Calling again immediately afterwards works, though.

| Works well. For packages not in the repository, just ask for them to be added via | style="background:#FFFF00;"| Receiving GPS data - works with [[Qi]] not with [[U-boot]]

It seems that suspend/resume only works when the FreeRunner has been connected to a powersource (only a few seconds

Personally I added an entry to /etc/hosts so the above works for me. I also added the desktop key to /home/root/.ssh/authorized_keys on This script works well if you want to configure it to backup always the same device.

...-wifi requires /etc/wpa_supplicant/wpa_supplicant.conf to be present. This works for me (tm)

... which works quite nicely! The cord "knot" makes it quite

* Derived works -- The ability to customize Openmoko to meet your specific needs is one of

* http proxy works but authentication not tested yet (--[[User:cberger|cberger]] tested versio

If it works ,you will receive following message:

...ork in landscape mode (disabling/enabling keyboard (in one go) in settings works around it) [http://trac.enlightenment.org/e/ticket/358 bug# 358]

Works={{works on Neophysis}} Works={{Works on QtMoko}}

...lader.de/12V-Version-mit-zusaetzlichem-USB.209.0.html Forumslader 12V+USB] works perfectly, maybe you could use it as a (powered) gender changer for other U

...Om 2009]], [[neovento]], [[Debian]] and [[Gentoo]]. At the moment FSO only works on the Openmoko phones. There is work in progress for bringing it to the Pa

** Restart the frameworkd and the phone Application (aka ophoned or zhone). Works fine for me. ...nymore...but then I don't really care about that as long as the connection works :). To do this on bootup automatically check out the next section.

This works by starting the FreeRunner from a system installed on the uSD, which will a

1. Use ''edje-editor''. Keep in mind that the editor works, quite nicely in some regards, but has some flaws and some distinctly missi * there, add the following code (Please note, that this works for an image with 480x640 pixels. If you have other sizes, adjust min/max/a

* Asset management, example: urban forestry, agriculture, public works

* [[Today|openmoko-today]] rewritten; works as application launcher and task manager as well

step works: Of course this also works when sharing your WLAN connection. Just set EXTIF to eth0.

Rotating the display head (xrandr --output default ...) works without major CPU load.

... for both ARM and x86 based platforms. ''Status: The "Nightly Build" Image works fine on Neo Freerunner, but phone functionality doesn't.''

... Solder braid (available at electronic parts stores including Radio Shack) works better than even a professional desoldering gun and is a lot cheaper. The adapter works with kingston data traveller 4G memory stick and aiptec pencam webcam. Howe

Mean works well if the input data is already good quality, reducing + / - 1

... accidentally discovering the Right PGA setting. It may be voodoo, but it works for me.

...5% due to different sensitivity (dBm/mW) of headphone speakers. Microphone works perfectly. Button may work (not tested).

It seems that suspend/resume only works when the FreeRunner has been connected to a powersource (only a few seconds

...opy and paste may not work depending on your terminal emulator. Commi just works or you can use [[NeoCon|neocon]] terminal emulator and add a per-character

...you are done. On a Mac you also have to install the Apple X-server app. It works right out of the box, and is a free download from www.apple.com. Textmate i

Serious developers are welcome too :) but remember "if it's cool, it works(in some way),doesn't annoying(too much) rest of things and fits on the nand

'''ToDo:''' Provide a shell script, that works on any linux box with available xdialog and [http://www.linphone.org/eng/do

Serious developers are welcome too :) but remember "if it's cool, it works(in some way),doesn't annoying(too much) rest of things and fits on the nand

...t and daemon to display the O2 (German mobile provider) Homezone icon. Now works on FSO and SHR.

Tick merged the qtopia echo patch (#1267), it works, no echo but the BTW, Matt has patches to solve ticket #1884. It works. Matt is

To be safe, you just first ensure the webcam works on a regular PC, and Linux in particular. This will minimise the problems y

'''Kingston SD-C02G''' works fine '''at good GSM coverage''' with the following kernel parameters here (

It seems that suspend/resume only works when the FreeRunner has been connected to a powersource (only a few seconds

This works by starting the FreeRunner from a system installed on the µSD, which will (this fluid command works even if the previous flashing was aborted and you have a broken and non-fun

'''Note''': As of Sep. 15 2008, suspend works 'out-of-the-box'; installing apm and the idle clock configuration changes d * only works if in presence of wireless network on boot, or when manually running <code>

|Merge the GPRS muxer into the stable distro, so that it works out of the box; || functionality ||

...at guide does not seem to work per se (fix this wiki if it should work and works for you) is to edit the default commandline in Qi for gta02 and recompile Q

...oid-image has been successfully created by Sean McNeil! - sms and calling works, wifi and bluetooth doesn't. [http://onlinedev.blogspot.com/2008/11/porting

Current status regarding suspend: Suspending and resuming works, when you remove console=ttySAC0,115200 from bootargs_base (see this [http: ... as a cell phone (as a landline that doesn't ring but instead vibrates, it works ok).

It seems that suspend/resume only works when the FreeRunner has been connected to a powersource (only a few seconds

...ns for the 'Echo Bug’ {{Ticket|1267}} in the git around October 15th, it works, can use more field testing. See also the thread [http://lists.openmoko.org

...rts false card size [https://docs.openmoko.org/trac/ticket/1815 1815]. But works fine once booted.

Now works with fso-gpsd too. It recognizes if gpsd or fso-gpsd is installed and start

SHR-unstable has a OPKG package, works on shr-testing:

...on that folder. Scrolling through the files is a little annoying, but it works passably well. some kind of a 'bookshelf' program that would display the l ... horizontal to fill in some of the account details, but aside from that it works quite well for IM.

| Works well. All debian stable and h:1 packages can be installed via apt-get. For

A: One works but takes away your freedom, the other is free but needs your work

...t runs a very decent speed, almost full speed. Sound works and touchscreen works. Its avaible for the gamerunner distro and needs SDL 1.2. Sometimes it hang ==What works==

...opy and paste may not work depending on your terminal emulator. Commi just works or you can use [[NeoCon|neocon]] terminal emulator and add a per-character

* [[Unison]] works. It is a file-synchronization tool for Unix and Windows. It determines all

...he corresponding text fields and hit '''''Save/Add'''''. Adding a new feed works the same (The Save/Add button doesn't get enabled before every textbox is f Tested on Om 2008.x - works! Yay!

(1) works, but need additional software to be installed

Then this one because it helps make sure everything works nicely...

== Stuff that works ==

* test if everything works now, close the casing if and enjoy stereo sound :)

...u can suspend/resume anytime! even when navit is speaking! yeah really, it works .... it takes almost all CPU you have, so don't push it too far. otherwise it works very well.

Works, can be tested with a simple game called [http://andappstore.com/AndroidPho Works, latest kernels need permissions for second rfkill interface in init.rc to

... With this script, [[Neo FreeRunner GPS#Bluetooth GPS relay|the FreeRunner works as a bluetooth GPS]]. ...he approximate tower location, and then initialize the AGPS with this data works great. There is a database of Wifi access points at [http://wigle.net/ wigl

... for both ARM and x86 based platforms. ''Status: The "Nightly Build" Image works fine on Neo Freerunner, but phone functionality doesn't.'' (1) works, but need additional software to be installed

Default mode works like this: {{Note|20100101: Unknown if this also works for illume keyboard}}

* [[SHR]]-XMPP works on XMPP. - the light version that ships with pidgin.

If you get error messages from the dfu-util command then try again. Often it works on the second try.

2. Clean the screen. A '''dry''' lens tissue works ok. Alcohol may well damage the screen!

* works on shr * works on om 2008.12

The original openmoko kernel works fine inclusive suspending and supports different really nice usb gadgets (n The new FSO4 kernel works fine and suspend/resume is also possible. But this kernel still has no load

** Simple connection sharing now works.

...plication for configuring the wireless interface in the OpenMoko-phone. It works with WPA, WEP and no-encryption. It supports profiles, so you dont have to

...h enables you to write real applications with a GTK-interface in PHP. This works really well on the Openmoko, and some applications have already been writte

...N_NAME=bluetoothd''' with '''DAEMON_NAME=hcid'''. This has been tested and works on FSO MS5.

# Short-Description: Uses Additional Swap If Available. works on SHR distro

... fill a correct login/password in the popup window displayed before upload works. ...ooping, thus rejecting the logs. By default, the level is set to info, and works well.

...way that you can think. Have a look in the User Manual to know how GridPad works.

...epts it and doesn't ask for PIN again but gives many error messages. ---- works fine here, hwo many can confirm that it DOESN'T work ?

=== OM2008.12 (works) === tested on openmoko-terminal2 and Message app. keyboard works fine but with issue #1

... your choice added. I've found that <tt><city>,<country abbreviation></tt> works well with the WeatherUnderground API. It's probably worth checking using th

* Arora ( http://code.google.com/p/arora/ ) Someone on the list sayd this works well in debian ...in an URL''' Select the old address in the address bar & type the address. Works nice!<BR>

...orts no-encryption, WEP Key, WEP String and WPA through wpa-supplicant. It works be generating working configs for wpa-supplicant and executing commands lik ...tly developed for Debian as the operating system on the phone, but it also works with OM2008 or SHR.

...pt remote shipping from Spain, Portugal, and Andorra. Depending on how all works in this party we can extend the area worldwide on next ones(Madrid, Caceres ...pt remote shipping from Spain, Portugal, and Andorra. Depending on how all works in Barcelona party we will extend the area worldwide, once is made official

* If audio works, load this module on boot:

Currently basic functionality works. I will be adding the ability to set reminders soon.

Asterisk has an issue in it's alsa_channel implementation, it works accessing pcm directly (plughw:0,0) with stuttered audio, while is not capa ...e changed) that you have to use while waiting for a full patch, warning it works only with dmix/dnsoop!

*works

3.- Get DVB utils (the Hackable1 .deb works fine)

Works={{Works on Hackable:1}}

Works={{Works on QtMoko}}

**Works well with SHR-Testing and usb port set to "host". Only issue i have with mi

...index.php?q=mailarchive/openmoko-community/2009/1/27/4823824 this howto]. (Works for webkit browsers)

* user changeable ring tones - works via command line

...fixed, but patching that file and disconnecting and reconnecting the phone works perfectly. --[[User:Johndoesacc|Johndoesacc]] 18:37, 20 August 2008 (UTC)

WiFi are not working. It doesn't have ifconfig. Usb-Networking works (with usb0), but after coping the rootfs to sd-card, you could change the i

* '''Mac''' SciTE or TextMate. SciTE works on any os x including Snow Leopard. Install MacPorts and mac os x X11 serve Before you start configuring SciTE, make sure ssh, scp and rsh works from a terminal window. Read [[USB_Networking]] to get it working. I have t

** GPS works

... when opening SMS (must be sms with more than 160 Chars) the SMS Main view works and shows the correct SMS count [[User:Gomez|Gomez]]</del> Should be fixed

...workd based distro but should be capable to run on everywhere, actually it works fine on my laptop too. ... (the prototype does that without any special code as the nature of how it works).

=How it works= * it works with every network, bt, wifi, usb and so on

===What works===

Works={{Works}} * Moved files around so it works with shr-core|

Works={{Works on QtMoko}} ...tion=Qalee is a phone environment developed in Qt4 above the fso stack. It works on the freerunner under any distribution that supports Qt4. It's not finish

| Austria|| Orange/One|| Any || web.one.at || web/web || works with gsm0710d under om2008.9: [http://freeyourphone.de/portal_v1/viewtopic. ...lic || Vodafone || any postpaid || internet || must be empty || [[GPRS_FSO|Works with FSO]] Behind NAT.

* Bluetooth works again (thanks to Bartłomiej Zimoń) Works={{Works on QtMoko}}

...tion=Qalee is a phone environment developed in Qt4 above the fso stack. It works on the freerunner under any distribution that supports Qt4. It's not finish ...ound picture with a cover-flow effect, letting the backlight always on now works.

...ct.org/trac/ticket/1105 reboot is required] and then application switching works as expected. |style="background:#88FF88;"|Works

...~dreilly/openmoko/]] before making this one. Please inform me if my layout works without these modifications, or if they are needed.

*The wifi doesn't work too well right now. (well, works now with 2008 updates, I think -- [[User:OlivierBerger|OlivierBerger]] 14:2

|same as above :( Works with one USB-BT dongle, does not work with another USB-BT dongle and does n |Tested on SHR with bluez4 and QtMoko bluez3; A2DP works correctly, GSM calls untested.

# If it works, you can set it as default boot procedure according to this procedure http: If the first ping works and the second doesn't then check the DNS server settings (see [[USB Networ

Example command (works for open, WEP and WPA/WPA2 networks, automatically determining the network

... for both ARM and x86 based platforms. ''Status: The "Nightly Build" Image works fine on Neo Freerunner, but phone functionality doesn't.'' (1) works, but need additional software to be installed

...u can suspend/resume anytime! even when navit is speaking! yeah really, it works .... it takes almost all CPU you have, so don't push it too far. otherwise it works very well.

The display size is very wrong, but it works and could show you something speedy.

Works={{works on Debian}} Works={{works on Android}}

| Works well. For packages not in the repository, just ask for them to be added via

... actually that you can give it a list of devices and it will pick one that works.

Works={{works on QtMoko}} * bearing-hold function now works.

* learn how the OMAP3530/OMAP4430 design works * works also outside of a case

... actually that you can give it a list of devices and it will pick one that works.

...m the old opimd db system to the new one. Contact me if you need any help. Works flawlessly, and very fast. ...es in page in two ways, DONE, and PRODUCTION, DONE means code is there and works, PRODUCTION means it's committed in master branch.

...repid), and report back here.(I tested, and it does not work, however 9.10 works great)

3) then test if it works

== looking for a stable release that just works, now called shr-obsolete?? ==

Here's my (Fox Mulder) /usr/bin/zhone-session file which works with xfwm and matchbox keyboard popup:

<p>In QtMoko v22, prepackaged ecl "0.9j (CVS 2008-02-16 11:33)" works, but doesn't understand Unicode, so source package 10.3.1 needs to be insta

Works={{works on QtMoko}} * Power management improvements, suspend works, bluetooth and wifi are no longer turned on by default.

*$ key works now

Works={{works on Android}} Works={{Works on QtMoko}}

{{Template:Works on Android}} {{Template:Works on Debian}}

Works={{Works on Debian}}

... attached via USB cable and booted properly, not at the Boot Menu). If it works, then you can add permanent configuration or use more sophisticated setups Test if it works:

* fixed GPS power up script (NeronGPS now works just fine again) Works={{Works on QtMoko}}

Perhaps if it works out this could be hosted by the various distro servers.

...ome pieces of software available to demonstrate that the hardware actually works.

{{Works on GameRunner}}

* fixes in Gamerunner game control : works always and better. Now red aux Works={{Works on GameRunner}}

... actually that you can give it a list of devices and it will pick one that works.

Works={{Works on Debian}} Works={{Works on SHR}}

Works={{Works on Debian}} Works={{Works on QtMoko}}

...FRNBv2-bottom.JPG|Bottom side with PCA9632 and LTC6904. The LED controller works :)|thumb]] |LTC6904 || 0x17 || ok || works with 15pF cap between SCL and SDA (NOR boot fix)

...ith the name <tt>myapp</tt>. Test the application in the QX-terminal if it works properly. Now we add this application <tt>myapp</tt> to the application lis

Works={{Works on Debian}} Works={{Works on QtMoko}}

Works={{Works on GameRunner}}

Works={{Works on Debian}}

Works={{Works on Debian}} Works={{Works_on_QtMoko}}

Works={{Works on GameRunner}}

ValaCompass works with the hmc5843 kernel module provided by [[User:Cmair]] and available at

Works={{Works on GameRunner}}

This also works with [http://en.wikipedia.org/wiki/Digital_Visual_Interface DVI] (Pins 6, 7

Works={{works on Android}} Works={{works on Android}}

Works={{Works on Debian}}

Works with kernel up to 2.6.29, tested on Debian.

{{DISPLAYTITLE:Hovedsiden}} <!-- Not sure if this tag works here -->

# Delivery notification works # Suspend / Resume works:

# Delivery notification works - No # Works out of the box - No