T-Mobile pppd scripts

From Openmoko

Jump to: navigation, search

I got this working using wap.voicestream.com. internet2 keeps giving me "LCP terminated by peer (^K!)" after CHAP auth.

Note to the above comment (2008-08-19 by Ryan Adams): I finally got internet2.voicestream.com working (on OM2008.8). Initially, like the user above, I received "LCP terminated by peer (^K!)" after CHAP authentication. It turns out this only happened when I dialed in to "99***2". When I used "99***1" instead I was able to get all the way through without any errors. I have the "T-Mobile Total Internet Add-on" plan and live around Seattle, WA.

Contents

/etc/ppp/peers/tmobile

  # File: /etc/ppp/peers/tmobile
  #
  /dev/ttySAC0
  115200
  crtscts
  lock
  hide-password
  defaultroute # set the default route
  usepeerdns
  holdoff 3
  ipcp-accept-local
  lcp-echo-failure 12
  lcp-echo-interval 3
  noauth
  noipdefault
  novj
  novjccomp
  replacedefaultroute
  persist
  debug
  
  connect "/usr/sbin/chat -v -f /etc/ppp/chatscripts/tmobile"
  disconnect "/usr/sbin/chat -v -f /etc/ppp/chatscripts/tmobile-disconnect"



This almost worked as is for me. I simply had to remove the "115200" line. I'm using T-Mobile in Denver, CO so I'm not sure if that's what caused the differences. - Dave


/etc/ppp/chatscripts/tmobile

 TIMEOUT 10
 ABORT 'BUSY'
 ABORT 'NO ANSWER'
 ABORT 'ERROR'
 SAY 'Starting GPRS connect script\n'

 ""'ATZ'
 SAY 'Setting APN\n'
 OK 'AT+CGDCONT=1,"IP","wap.voicestream.com"'

 ABORT 'NO CARRIER'
 SAY 'Dialing...\n'
 OK 'ATD*99***1#'
 CONNECT 

I was able to use "internet2.voicestream.com". Once again, not sure if being in Denver caused the difference. - Dave


/etc/ppp/chatscripts/tmobile-disconnect

 "" "\K"
 "" "+++ATH0"
 SAY "GPRS disconnected."

/etc/ppp/chap-secrets

 # client        server  secret                  IP addresses
   *             *       ""                      *

Modified from info found here: [1]


Failed negotiation

   root@fic-gta01:~$ pppd nodetach call tmobile
   Starting GPRS connect script
   Setting APN
   Dialing...
   Serial connection established.
   using channel 6
   Using interface ppp0
   Connect: ppp0 <--> /dev/ttySAC0
   sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x4e9abed> <pcomp> <accomp>]
   rcvd [LCP ConfRej id=0x1 <magic 0x4e9abed>]
   sent [LCP ConfReq id=0x2 <asyncmap 0x0> <pcomp> <accomp>]
   rcvd [LCP ConfAck id=0x2 <asyncmap 0x0> <pcomp> <accomp>]
   rcvd [LCP ConfReq id=0xb <asyncmap 0x0> <auth chap MD5> <pcomp> <accomp>]
   sent [LCP ConfAck id=0xb <asyncmap 0x0> <auth chap MD5> <pcomp> <accomp>]
   sent [LCP EchoReq id=0x0 magic=0x0]
   rcvd [CHAP Challenge id=0xc <c034dedca83809689a0180da3a2f2016460304ca4e64a1>, name = ""]
   sent [CHAP Response id=0xc <1c2a6e0f23afc550eeae08d33717b79c>, name = "fic-gta01"]
   rcvd [LCP EchoRep id=0x0 magic=0x0]
   rcvd [CHAP Success id=0xc ""]
   CHAP authentication succeeded
   sent [CCP ConfReq id=0x1 <deflate 15> <deflate(old#) 15>]
   sent [IPCP ConfReq id=0x1 <addr 0.0.0.0> <ms-dns1 0.0.0.0> <ms-dns3 0.0.0.0>]
   rcvd [LCP ProtRej id=0x4 80 fd 01 01 00 0c 1a 04 78 00 18 04 78 00]
   rcvd [LCP TermReq id=0x7 0b 21]
   LCP terminated by peer (^K!)
Personal tools