Search results

...too now (May 2008) however you may need to edit the e-build because it has no keywords enabled by default: edit /usr/portage/dev-embedded/openocd/openocd ...wer button until the boot loader does its count-down, or, in case there is no runnable boot loader,

...c to pass through on port 123 (NTP) on your host machine or you may get a "no route to host" error from ntpclient. No matter which method you used above, sync the hardware clock with the system

Currently there is no such version planned.<br> ...a huge segment of the CDMA high-end phone market, especially since there's no indication that a CDMA iPhone will be released any time soon.

... screen when it is connected to the OM-wallcharger or a PC's USB port with no battery installed, your device isn't affected by this issue. |no

:#Each receptacle has four pins. Use a multimeter to verify that you have no short circuits between the pins or the shield. ... A plug into half, connect it a receptacle and again measure that you have no short circuits. Then connect the test cable to PC and verify that you see

...runner, condition depends on screen will purchase from anywhere, would pay no more than £100, more if other components/peripherals are included. Contac

| {{no}}

...headphone jack; this has multiple drawbacks as jack insert detection might no longer work, possible damage to U4401 and the like; in this case you should ...odification described above the connections to the caps are very short and no modifications are needed to the can.

...ew days. Charge battery to a reasonable level prior to extended periods of no usage. Keep in a dry cool place charged to no more than 75% and NEVER under 25%. Check every 3 months and recharge when d

{{Note|In meanwhile '''SHR-U''' and '''SHR-T''' are no longer supported. '''SHR-CORE''' is now the official distribution and is de Unless this resource is enabled you've no eth0 and wifi module is completely un-powered. Use the [[Mokonnect]] networ

DOES NOT WORK - no access to Hardware Clock no

* UsbHost - Unless this resource is enabled, you've no usb host. * WiFi - Unless this resource is enabled you've no eth0 and wifi module is completely unpowered.

... of the GTA02 to display the North direction in a 3-dimensional way. Thus, no matter in which direction you hold your Freerunner, vala compass will show

...lows a long running connection for chunking audio data on the submit side. No longer do you have to segment audio clips longer than 15 seconds as mention

# The GTA04 has vastly improved on every area of the FR. <br> Assure no bugs to receiving calls, GPU bottlenecks solved etc... ...ted the wifi firmware isolated so it cannot interfere with the O/S, though no prototype was ever made so it's just like normal. Firmware in /lib/firmware

{{FeatureDone|Splinter|change blank tags to say 'No Title'|Jeremy}} {{FeatureDone|Splinter|fill screen by default with no grey areas|Jeremy}}