Search results

[[Image:GTA01-U-Boot.JPG|thumb|300px|U-Boot menu on Neo 1973]] [[Image:Neo1973 uboot splash closeup.jpg|thumb|300px|[[Configuring_the_boot_splash_screens# * Hold in the AUX button on power-up to access the boot menu.

==== Power Supply ==== * If the phone is self-powered, there is no need to connect a power supply for JTAG, USB and serial port, since those are phone-powered

{{Neo1973}} ...of Openmoko. You can find specifics of the [[:Category:Neo1973 Hardware | Neo1973 Hardware]] by reviewing this introduction page and the pages in the categor

...D Revision 82 and later have been proven to work with our [[QT2410]] and [[Neo1973]] target board and wiggler as well as Amontect JTAGkey and JTAGkey tiny. Y ...[NAND bad blocks#JTAG_.2F_OpenOCD_.2F_u-boot_RAM_based]], as well as the [[Neo1973 OpenOCD#Using OpenOCD telnet interface]] section below.

There are times when you wish to power up the device and not power up the gsm/cellphone portion of the phone. For example in meetings you migh * Offer a way to easily switch into "Driving mode", e.g. via a button or gesture (user configurable?)

This page details the power management of the Phase 1 Neo1973. Much of it is inapplicable to earlier models. Power management is of utmost concern to any mobile device.

...page provides information on the architecture of the second version of the Neo1973 debug board (the one shipped with the "Advanced" [[Neo 1973]] kits). [[Image:Neo1973 debugboard v2 top annotated.jpg|left|500px|Annotated PCB Photograph]]

...rging logic is embedded into our [[Neo1973 GTA01 Power Management|PCF50606 Power Management]] Unit (PMU). The PCF50606 supports a variety of [[Neo1973 Battery]] charging modes, based around the hardware limitations of USB.

* Power on the Neo. (If it has powered on by itself, that's okay.) === power-off while DFU ===

...e features which some would like to go into future phones similar to the [[Neo1973]]. ...would like, that connect easily to the phone - initially primarily for the Neo1973

Bluetooth is one of the core functions of the Neo1973, however it is basically unimplemented on the software side at the moment. == Power it up ==

# Press and hold the AUX button # Press the Power button until the phone powers on and displays the boot menu

...d like below 240x320 it's work like a charm and to quit just use the power button. =Neo1973=

...age, although it doesn't emulate any of the [[:Category:Neo1973 Hardware | Neo1973 Hardware]] except the very CPU core. Read more in the [[FAQ#Q:_Is_there_an_ ...om Openmoko repositories is also capable of emulating most of the actual [[Neo1973]] (GTA01) hardware, although not all of it. Additionally, Neo FreeRunner em

This page tries to collect some information on how to use your Neo1973 together with a computer running a Microsoft(R) Windows(TM) series operatin ...rs.informatik.uni-halle.de/~rabe/neo/Neo1973.inf ([[Neo1973.inf|Listing of Neo1973.inf]]). If you have Windows Vista x64 try this one: [http://openmoko.kamill

=== Q: Что такое Openmoko и Neo1973? === ...атформу для мобильных телефонов. [[Neo1973/ru|Neo1973]] от [[FIC]] это первый телефон полностью под

==== Power Management ==== The '''gta01_pm_gsm''' driver implements GSM power management (this means, if this is compiled as a module, you have to load t

[[Image:GTA01-U-Boot.JPG|thumb|300px|u-boot menu on Neo1973]] [[Image:Neo1973 uboot splash closeup.jpg|thumb|300px|u-boot splash screen on Neo1973]]

Neo1973的主处理器(CPU)是一个Samsung S3C2410AL-26 (可运行在266 MHz) Neo1973有一个microSD卡的插槽。

...ise übersetzt. Die englische Version dieser Seite findet sich [[:Category:Neo1973 Hardware | hier ]]. Der Hauptprozessor (CPU) im [[Neo1973]] ist ein "Samsung S3C2410AL-26" (Er kann auf bis zu 266MHz getaktet werden

{{Warning | Be careful when updating u-boot on a Neo1973 as there is a risk of bricking the device (unless you have a debug board). ... to access SDHC cards (4G or larger). The kernel does have SDHC support on Neo1973, so it is possible to have the root filesystem on SDHC and the kernel on NA

Dies ist eine kurze Anleitung, die Ihnen das in Betrieb nehmen eines Neo1973 erleichtert Zustätzliche Informationen im Beitrag [[Disassembling Neo1973/de]].

... le altre pagine riguardanti l' [[:Category:Neo1973 Hardware/it | Hardware Neo1973]] qui' di seguito. [[Wishlist:Neo1973_P0_Review/it | Lista dei desideri:Opinioni Neo1973 Fase 0]]

This describes how to update your Neo1973 to the latest software. We'll update the kernel, the root filesystem and op ...n | AUX button]] and then press the phone's [[Neo1973 Power Button | POWER button]].

See [[Hardware:Neo1973:Alternate_Cases:Camera | Alternate Cases:Camera]] for phone case suggestion The [[Neo1973_Hardware#Processor|current Neo1973 processor]] does not have a camera interface. A chip with the [http://www.m

...e would like in future Openmoko devices that are very different from the [[Neo1973]]. DVD/media players, cameras, ... ...tting reasonably open access to 3G hardware that are delaying 3G for the [[Neo1973]] series

=== Q: Cos'è Openmoko e Neo1973? === ...imo stack software per cellulari totalmente aperti del mondo. Il [[FIC]] [[Neo1973]] è il primo telefono Openmoko completamente supportato.

This is a page detailing accessories that may be of use for your Neo1973. There are (at least) two uses for a Bluetooth pedometer as a Neo1973 accessory:

...ucción y las páginas especifícas para el [[:Category:Neo1973 Hardware | Neo1973 ]] descritas en la parte de abajo. El «cerebro» del sistema (CPU) Neo1973 es un Samsung S3C2410AL-26 (Con una frecuencia máxima de 266 MHz)

9. USB Host Power<br/> A NXP PCF50633 04 N3 is used for [[Neo1973_Power_Management|power management]].

=== Q: Qu'est-ce que Openmoko et Neo1973 ? === ...ion logicielle totalement ouverte au monde pour téléphone portable. Le [[Neo1973]] de [[FIC]] est le premier téléphone completement compatible avec [[Open

# press the Refresh button (which loads the list of packages on the server) # Now, on your Openmoko, hold the AUX button while pressing the Power button for 5 seconds

* Power button press ...t 30mA additional standby current, since we cannot properly switch off the power supply to the S3C2410 PLL's. There is nothing we can do to change this wit

...uboot splash closeup.jpg|thumb|300px|Заставка загрузчика Neo1973]] ...u.jpg|thumb|400px|Загрузочное меню u-boot на экране Neo1973]]

...functions which fall outside the scope of [[gsmd]] such as the buttons and power management. It is considered a temporary, throw-away solution [http://svnwe * [[Getting Started with your Neo1973#Buttons]]

This page explains how you can manually re-flash the [[U-Boot]] into your Neo1973. It is basically the manual task of what the [[Devirginator]] tries to do * Neo1973 device (any device will work)

...he logical mode of the USB port, the Neo FreeRunner can provide 5 volt USB power to an attached USB device. To enable this (not available on Neo 1973): # echo 1 > /sys/devices/platform/neo1973-pm-host.0/hostmode

Now you must power up the GPS-chip by opening the "Settings" application and setting the GPS e # echo 1 >/sys/devices/platform/s3c2440-i2c/i2c-adapter/i2c-0/0-0073/neo1973-pm-gps.0/pwron

...Cependant, cela n'émule aucun [[:Category:Neo1973 Hardware | matériel du Neo1973]] à l'exception le CPU minimal. Plus d'informations dans la [[FAQ#Q:_Is_th ...pable d'amuler la plupart (mais pas la totalité) du matériel actuel du [[Neo1973]] (GTA01). De plus, l'émulation du Neo FreeRunner est en cours de travail.

...y license, but since version 3.4.0, everything needed to use Qtopia on the Neo1973 is licensed under the GPL. # Remove the USB cable and the Battery for a moment to remove all power from the Neo, or

...[[Image:Neo1973 uboot splash closeup.jpg|thumb|300px|u-boot boot splash on Neo1973]] * Gleichzeitig die AUX und Power-up gedrückt halten, um ins Bootmenü zu gelangen.

Dit is een handleiding voor de beginnende gebruiker van de [[Neo1973]] telefoon. ''(nog niet compleet in het Nederlands vertaald)'' ...[[micro-SD]] geheugen kaart zijn optioneel, zonder deze onderdelen werkt [[Neo1973]] ook. De SIM-kaart is een vereiste om gebruik te maken van het GSM-netwerk

...iction of remaining battery power and time until shutdown, based on actual power dissipation. For more information, see the GTA01 battery info at [[Neo1973 Battery]]

这是一个对刚拿到[[Neo1973]]手机的人很有用的上手指南。 ...插入Neo顶部的小凹坑，轻轻地拉起后盖(参见[[Disassembling Neo1973]]中的第一步)。

mtdparts=mtdparts=neo1973-nand:0x00030000(u-boot),0x0000c000(u-boot_env),0x00200000(kernel),0x0013000 mtdids=nand0=neo1973-nand

...мы с калибровкой. Проблема обнаружена на Neo1973 с образами SHR мая 2010. ...еключателей: Airplane mode, Phone profiles, Power settings and Power buttons.

...Image:Neo1973 uboot splash closeup.jpg|thumb|300px|u-boot splash screen on Neo1973]]

[[Image:Debian.png|thumb|480px|''Debian on neo1973'']] wget http://rabenfrost.net/celtune/uImage-2.6.24+svnr4194-r4165-r3-neo1973.bin

*LED- LED 指示器位於 Aux/Power 按鈕下。

...的[[Neo1973 AUX Button | AUX 按鈕]] 接著按住手機[[Neo1973 Power Button | 電源按鈕]]. Power off

...的[[Neo1973 AUX Button | AUX 按钮]] 接着按住手机[[Neo1973 Power Button | 电源按钮]]. Power off

*LED- LED 指示器位于 Aux/Power 按钮下。

...y license, but since version 3.4.0, everything needed to use Qtopia on the Neo1973 is licensed under the GPL. # Remove the USB cable and the Battery for a moment to remove all power from the Neo, or

...nterface Navigation- Touch screen on LCD, 2 control “buttons”, 1 Power button, 1 Aux for 911 emergency call ...st mode switch-able (to be used for software downloading), provide host 5v power

...age, although it doesn't emulate any of the [[:Category:Neo1973 Hardware | Neo1973 Hardware]] except the very CPU core. Read more in the [[FAQ#Q:_Is_there_an_ ...了特定的CPU核，它不能完全模拟[[:Category:Neo1973 Hardware | Neo1973 Hardware]]。想知道更多的资料，可以读[[FAQ#Q:_Is_there_an_emula

...il software Openmoko ed è il diretto discendente del precedente [[FIC]] [[Neo1973]]. Le specifiche hardware sono [[Neo FreeRunner GTA02 Hardware/it|qui]]. Alcune caratteristiche sono simili al precedente [[Neo1973]] come

...了CPU的核心外，它沒有模擬任何[[:Category:Neo1973 Hardware | Neo1973 硬體裝置]] 。 *''Neo1973'' - 放置在Openmoko下的QEMU tree也可以模擬實際的[[Neo1973]] (GTA01)硬體，雖然它無法模擬每一種硬體。此外，Neo FreeR

...desarrollo- sólo está incluída en la versión para desarrolladores del Neo1973 [[Image:Neo1973 debugboard v2 top annotated.jpg|left|500px|Circuito impreso]]

The specs share some features with the previous [[Neo1973]] such as:

...nterface Navigation- Touch screen on LCD, 2 control “buttons”, 1 Power button, 1 Aux for 911 emergency call ...st mode switch-able (to be used for software downloading), provide host 5V power

Neo1973 Bootloader U-Boot 1.3.2+gitr18+64eb10cab8055084ae25ea4e73b66dd03cc1a0cb Neo1973 Bootloader U-Boot 1.3.2-moko12

...fforts) on the GTA02 (FreeRunner) phone. It is similar to the [[Qtopia on Neo1973]] page. ...iewcat.php?cid=6 here] (including Qtextended/Qtopia 4.4 for FreeRunner and Neo1973!)

Un NXP PCF50633 04 N3 è usato per [[Neo1973_Power_Management|power management]]. * Supply USB 5v in Host mode using usb power switch AAT1275IRN-5.0-T1

...nX11]]) sul telefono GTA02 (FreeRunner). È simile alla pagina [[Qtopia on Neo1973]]. ...ttobre 2008 Trolltech ha rilasciato l'ultima immagine di Qtextended per il Neo1973 e Neo FreeRunner contentente QtExtended 4.4.2 (versione GPL).

...nterface Navigation- Touch screen on LCD, 2 control “buttons”, 1 Power button, 1 Aux for 911 emergency call ...ost-mode switchable (to be used for software downloading), provide host 5V power

*[[Neo1973]] *[[Neo1973 hardware]]

'model': '"Neo1973 GTA01/GTA02 Embedded GSM Modem"', ...image for flashing MOKO11 to GTA02 Freerunner only (not suitable for GTA01 Neo1973).'''

...n on FreeRunner|] или [http://wiki.debian.org/DebianOnNeo1973 Debian on Neo1973] (смотри [http://lists.linuxtogo.org/pipermail/smartphones-standards/ ...nfiguration changes do not seem to be necessary any more. Press the power button for two seconds (in zhone) or run 'apm -s' to suspend.

There is a [[Neo1973|GTA01]] build of Qi, but using it without a debug board is not recommended Download from either the Neo1973 or NeoFreerunner directory.

...y license, but since version 3.4.0, everything needed to use Qtopia on the Neo1973 is licensed under the GPL. # Remove the USB cable and the Battery for a moment to remove all power from the Neo, or

SW on OM is QT Extended and when I press power button (to wake up mobile) TV immediately turn off. I have finally found where the shape and visual appearance of the Neo1973 and Freerunner come from:

{{Warning | Se ha de tener cuidado si se intenta actualizar el u-boot en un Neo1973 ya que existe el riesgo romper el dispositivo (a menos que se tenga la debu ...acceder a tarjetas SDHC (4G o mayores). El kernel tiene soporte SDHC en el Neo1973, por lo que es posible tener un sistema de archivos raíz en una SDHC y el

* hold the 'Aux button' (top left) in while you push the 'Power button' (bottom right)Android SDK on PC/Laptop * Select '''Boot from microSD card (FAT+ext2)''' keep pressing the AUX button until the option is highlight

** Press and hold the AUX button ** Press the Power button until the boot menu comes up

There is a [[Neo1973|GTA01]] build of Qi, but using it without a debug board is not recommended Скачивать для Neo1973 или NeoFreerunner в соответствующих папках.

... off you freerunner (if necessary) and start NOR uBoot by pressing AUX and Power-On at the same time and then start [[dfu-util]] on your computer with the f ...in/xinput_calibrator_once.sh if calibration is wrong. I found this using a Neo1973 and SHR images from around May 2010.

* Insert microSD in your freerunner and boot from SD-Card (press Power & AUX-Button together to get boot menue) ==== Installation on SDHC card with u-Boot (Neo1973) ====

...button]] is on the lower right-hand side, and the [[Neo1973 AUX Button|AUX button]] is on the top-left. Button functions while the phone is on (as of writing):

# Press and hold the AUX button # Press the Power button until the phone powers on and displays the boot menu

...project because of the spiritual continuation - GTA01 was the codename for Neo1973, GTA02 was the Neo FreeRunner, and GTA03 was the canceled successor product ...files, 3) Sys paths have changed, so you most probably want to add "om gsm power 1" to /etc/rc.local (and install newest omhacks from pkg-fso if you already