Random notes on SHR kernel patches (v2.6.39.4..shr-2.6.39-nodrm).

Contents 1 ARM: s3c24xx: Set ARCH_NR_GPIOS according to the selected SoC types. 2 s3c24xx: Fix level irqs on external interrupts. 3 mtd: s3c2410_nand: Add config option to disable hw ecc at runtime 4 Add s3c24xx_serial_console_set_silence 5 Add c fiq handler. 6 Add glamo driver. 7 ARM: gta02: Add LED support 8 gta02: Disable hardware ECC unless we get instructed to enable it 9 gta02: Remove usage of pcf50633 gpio api 10 s3c2440: gta02: Configure pcf50633 gpios. 11 ARM: s3c2440: GTA02: Select SPARSE_IRQ 12 gta02: Add notify handler to probe device children 13 gta02: Add bt power management device 14 gta02: Add gps power management device 15 gta02: Add gsm power management device 16 gta02: Add wlan power management device 17 gta02: Add glamo device 18 Add jbt device. 19 gta02: Add fiq handler 20 gta02: Add battery driver 21 gta02: add support for platform_battery 22 Add atheros sdio ids. 23 Add ar6000 wireless driver. 24 Add jbt6k74 display driver. 25 LEDS: leds-pwm: Add init, notfiy and exit callbacks 26 RTC: PCF50633: Don't request update IRQ 27 pcf50633-gpio: Add gpiolib support. 28 pcf50633: Move pcf50633-gpio driver to the gpio drivers folder 29 MFD: pcf50633: Use mfd cells to register child devices 30 MFD: pcf50633: Use the genirq for irq handling 31 power: implement platform battery driver 32 Define machine_is_neo1973_gta01() 33 glamo-mci: revert changes for Per's patchset 34 nand/s3c2410: add mising badblocksbits value 35 Openmoko resume reason sysfs node ported from 2.6.29 36 glamo-display: fix WSOD for 242 timming 37 Enable powering off after 8s POWER press 38 gta02: add support for usb host mode 39 ar6000_delay.patch 40 wm8753: use snd_soc_jack on neo1973 41 Fix high power consumption in suspend 42 Force GPS power up on resume if it were powered up on suspend 43 lis302dl accelerometer driver 44 input: lis302dl: fix the resume path 45 lis302dl: use ABS events rather then REL events 46 Fix compile error for gta02 accelerometer. 47 tslib relies on ts pressures events so this hack is needed to get tslib stuff working 48 touchscreen: ignore unexpected interrupts 49 s3c2410_ts: jitter less touchscreen for glamo, version 4 50 wm8753: allow setting DAI mode even while pcm is active 51 Add .config from http://build.shr-project.org/tests/jama/kernel-nodrm/config-2.6.39.gz 52 Workaround toolchain bug: http://gcc.gnu.org/bugzilla/show_bug.cgi?id=48783 53 First attempt at fixing openmoko bug #2478

ARM: s3c24xx: Set ARCH_NR_GPIOS according to the selected SoC types.

lindi: bugfix/feature. sounds sensible. s3c specific

s3c24xx: Fix level irqs on external interrupts.

lindi: bugfix. s3c specific

mtd: s3c2410_nand: Add config option to disable hw ecc at runtime

lindi: feature. simple. I personally can live without nand. 

Add s3c24xx_serial_console_set_silence

lindi: What is this for? To allow using serial console and GSM on the same serial port? Who needs this anymore?

Add c fiq handler.

lindi: feature. tricky! Used by battery hdq queries (temperature, current, capacity etc.) and vibrator. Should just rewrite them in assembler?

Add glamo driver.

lindi: feature. tricky!! This does not include the DRM/3D bits but it is enough for me.

ARM: gta02: Add LED support

lindi: feature. openmoko specific. simple.

gta02: Disable hardware ECC unless we get instructed to enable it

lindi: openmoko specific. nand. simple.

gta02: Remove usage of pcf50633 gpio api

lindi: openmoko specific. cleanup.

s3c2440: gta02: Configure pcf50633 gpios.

lindi: openmoko specific.

ARM: s3c2440: GTA02: Select SPARSE_IRQ

lindi: openmoko specific. simple.

gta02: Add notify handler to probe device children

lindi: openmoko specific. feature.

gta02: Add bt power management device

lindi: openmoko specific. simple.

gta02: Add gps power management device

lindi: openmoko specific. simple.

gta02: Add gsm power management device

lindi: openmoko specific. simple.

gta02: Add wlan power management device

lindi: openmoko specific. simple.

gta02: Add glamo device

lindi: openmoko specific. relatively simple, real trouble is in the glamo driver itself

Add jbt device.

lindi: openmoko specific. backlight?

gta02: Add fiq handler

lindi: openmoko specific. depends on the tricky fiq support above.

gta02: Add battery driver

lindi: openmoko specific. depends on the tricky fiq support above.

gta02: add support for platform_battery

lindi: openmoko specific. simple.

Add atheros sdio ids.

lindi: trivial.

Add ar6000 wireless driver.

lindi: tricky! probably can never be mainlined. Maybe we can build it as a separate module package in debian?

Add jbt6k74 display driver.

lindi: feature. quite essential. does not look too tricky.

LEDS: leds-pwm: Add init, notfiy and exit callbacks

lindi: feature. not sure how easy this is to mainline

RTC: PCF50633: Don't request update IRQ

lindi: safe cleanup?

pcf50633-gpio: Add gpiolib support.

lindi: feature. has some useless whitespace changes. gpio stuff which I don't really understand

pcf50633: Move pcf50633-gpio driver to the gpio drivers folder

lindi: just moves a file

MFD: pcf50633: Use mfd cells to register child devices MFD: pcf50633: Use mfd cells to register child devices

lindi: cleanup? No idea how tricky this really is

MFD: pcf50633: Use the genirq for irq handling

lindi: has again extra whitespace changes. I guess genirq is some more abstract way to handle IRQs? Can not really judge how tricky this is.

power: implement platform battery driver

lindi: feature. we can live without this if bq27x00 is mainlined or vice versa.

Define machine_is_neo1973_gta01()

lindi: trivial

glamo-mci: revert changes for Per's patchset

lindi: glamo stuff, no idea

nand/s3c2410: add mising badblocksbits value

lindi: bugfix. trivial.

Openmoko resume reason sysfs node ported from 2.6.29

lindi: feature. I personally need this a lot so that I can differentiate between RTC and GSM wakeups

glamo-display: fix WSOD for 242 timming

lindi: openmoko specific. glamo hack. Who said 2-4-2 timings have no drawbacks? ;-)

Enable powering off after 8s POWER press

lindi: openmoko specific. feature. simple. I personally can live without this.

gta02: add support for usb host mode

lindi: openmoko specific feature. looks quite simple.

ar6000_delay.patch

lindi: atheros wifi hack

wm8753: use snd_soc_jack on neo1973

lindi: openmoko specific. gta01-only?

Fix high power consumption in suspend

lindi: openmoko specific. bugfix. simple.

Force GPS power up on resume if it were powered up on suspend

lindi: 

lis302dl accelerometer driver

input: lis302dl: fix the resume path

lis302dl: use ABS events rather then REL events

Fix compile error for gta02 accelerometer.

tslib relies on ts pressures events so this hack is needed to get tslib stuff working

touchscreen: ignore unexpected interrupts

s3c2410_ts: jitter less touchscreen for glamo, version 4

wm8753: allow setting DAI mode even while pcm is active

Add .config from http://build.shr-project.org/tests/jama/kernel-nodrm/config-2.6.39.gz

Workaround toolchain bug: http://gcc.gnu.org/bugzilla/show_bug.cgi?id=48783

First attempt at fixing openmoko bug #2478