Neo FreeRunner Wifi
From Openmoko
Line 29: | Line 29: | ||
} | } | ||
− | # WPA: | + | # WPA: |
− | network = { | + | network = { |
− | ssid="your_ssid" | + | ssid="your_ssid" |
− | scan_ssid=1 | + | scan_ssid=1 |
− | psk"secret key" | + | psk="secret key" |
− | priority=10 | + | priority=10 |
− | } | + | } |
− | # WEP: | + | # WEP: |
− | network = { | + | network = { |
− | ssid="your_ssid" | + | ssid="your_ssid" |
− | scan_ssid=1 | + | scan_ssid=1 |
− | key_mgmt=NONE | + | key_mgmt=NONE |
− | wep_tx_keyidx=0 | + | wep_tx_keyidx=0 |
− | wep_key0="secret key" | + | wep_key0="secret key" |
− | priority=8 | + | priority=8 |
} | } | ||
− | # Open: | + | # Open: |
− | network={ | + | network={ |
− | ssid=" | + | ssid="your ssid" |
− | key_mgmt=NONE | + | key_mgmt=NONE |
− | priority=5 | + | priority=5 |
} | } |
Revision as of 19:06, 3 July 2008
To get wlan working with your NeoFreerunner, you can follow these steps:
1. create and edit a suitable /etc/wpa_supplicant/wpa_supplicant.conf (use your favourite search engine to get known the syntax)
2. execute `ifup eth0`
3. execute `wpa_supplicant -ieth0 -c/etc/wpa_supplicant/wpa_supplicant.conf` (you can add a & for running in background)
4. get a IP via dhcp: `udhcpc eth0`
that's it, your wlan should work
Sample wpa_supplicant.conf:
ctrl_interface=/var/run/wpa_supplicant eapol_version=1 ap_scan=1 # WPA2: network={ ssid="your ssid" scan_ssid=1 proto=RSN key_mgmt=WPA-PSK pairwise=CCMP TKIP group=TKIP CCMP psk="secret key" priority=50 } # WPA: network = { ssid="your_ssid" scan_ssid=1 psk="secret key" priority=10 } # WEP: network = { ssid="your_ssid" scan_ssid=1 key_mgmt=NONE wep_tx_keyidx=0 wep_key0="secret key" priority=8 } # Open: network={ ssid="your ssid" key_mgmt=NONE priority=5 }