View source for Openmoko under QEMU/fr
From Openmoko
You do not have permission to edit this page, for the following reasons:
You can view and copy the source of this page:
Template used on this page:
Return to Openmoko under QEMU/fr.
You do not have permission to edit this page, for the following reasons:
You can view and copy the source of this page:
Template used on this page:
Return to Openmoko under QEMU/fr.
![]() |
Languages: |
English • العربية • Български • Česky • Dansk • Deutsch • Esperanto • Eesti • Español • فارسی • Suomi • Français • עברית • Magyar • Italiano • 한국어 • Nederlands • Norsk (bokmål) • Polski • Português • Română • Русский • Svenska • Slovenčina • Українська • 中文(中国大陆) • 中文(台灣) • Euskara • Català |
QEMU peut être utilisé de trois façons différentes pour tester Openmoko. Suivant le pourquoi de votre utilisation de l'émulateur, vous devriez choisir la plateforme cible.
Cette cible devrait normalement exécuter les images rootfs originelle d'Openmoko, mais devrait aussi être capable d'exécuter le u-boot et les images noyaux utilisés par le Neo 1973 (GTA01) sans modification. Hormis les autres différences, vous allez remarquer qu'entre cette approche et celle la cible Integrator/CP, vous aurez une résolution d'écran correcte, de (fausses) lecture de batterie, et d'autres joyeusetés. A l'heure actuelle, les points manquant à l'émulateur sont : AGPS et le Bluetooth - ces choses devraient fonctionner, tout comme l'utilisabilité générale. Même avec ces choses manquantes, Qemu devrait fournir une aide substentielle aux développeurs pour le deverminage du noyau et du u-boot.
Ce que Qemu *ne peut pas* être utilisé pour, et probablement aucnu autre émulateur, sont les mesures de vitesses et l'évaluation du sentiment général de performance d'Openmoko. Le code s'exécute dans qemu avec la vitesse maximum que votre ordinateur hôte peut fournir avec une latence correspondant à la transmission du code de la cible au code de l'hôte, et ce surcoût n'est pas le même pour chaque instruction. Cela signifit que mêm esi votre Neo virtuel fournit environ 100 BogoMIPS (Qui est la vitesse d'un Neo réel), les différentes actions effectuées dans l'émulateur ne s'exécuteront pas à la même vitesse. Sur la plupart des PC, vous remarquerez que le Neo virtuel est plus rapide que le réel (Les opérations Audio devraient être l'une des exceptions).
Ebauche du status pour chaque composant nécessitant une émulation est disponible sur la page : Neo1973 Hardware.
Matériel | Status | Notes d'utilisation |
---|---|---|
S3C2410A Processeur | ||
Coeur ARM920T | Fonctionne | Déjà dans la branche principale de QEMU. |
Fonctionnalités de bas niveau | Fonctionne | Cela inclue l'interface GPIO, DMA, controlleur d'interruptions, Timers, controlleur NAND, hôte MMC/SD, interfaces I2C et IIS, Mémoire & horloge & contrôleur de gestion de batterie, RAM. |
Port série | Fonctionne | Use the "-serial" switch (maybe be specified multiple times) to tell QEMU where serial input/output should go to. GSM module will be connected on UART0. |
RTC | Fonctionne | On start QEMU will load it with current time/date - the Neo1973 kernel doesn't use it for time/date source currently. |
SPI | Fonctionne | The guest kernel can drive it using either the SPI interface or raw GPIO bitbanging. |
LCD | Fonctionne | The virtual LCD will display contents in QEMU window unless "-nographic" is specified on command line. |
ADC | Fonctionne | Mouse events in QEMU window generate what would be touchscreen events on a Neo1973 and are passed to the guest OS through the on-chip ADC. |
OHCI USB | Fonctionne | This part is in mainline QEMU. Use the "-usb" switch to enable the controller and "usb_add" in QEMU monitor to attach new virtual or physical USB devices. |
Slave USB | Fonctionne | Linux's dummy HCD in conjunction with gadget filesystem API is used to make the virtual Neo appear as a real one connected to the host computer. See Setting up USB connection below. (Experimental) |
Watchdog | Fonctionne | This is one of the less important on-chip peripherals in S3C2410. It is however used by Linux for rebooting the board. |
I2C bus peripherals | ||
PCF50606 | Fonctionne | (Aka PMU) Fakes the battery charge level (set at 88%), POWER button, etc. Also contains an RTC, also unused by Linux. |
LM4857 | Fonctionne | |
WM8753L | Fonctionne | The CODEC is also connect to the CPU's IIS port. Basic audio functionality is supported - see QEMU documentation on getting audio input/output from the emulator. Volume control has no effects. |
Other peripherals | ||
Flash NAND | Fonctionne | However, some pieces are not confirmed to be completely compatible with the real hardware because of lack thereof. Use "-mtdblock flashimagefilenamehere" switch to point QEMU to your flash image. The file should be at least 69206016 bytes big. |
JBT6K74-AS(PI) | Fonctionne | (Aka LCM) Wired to the SPI channel 1 |
Boutons | Fonctionne | Enter is the AUX button, Space is the POWER button. Wired to on-chip GPIO and PCF50606. |
Carte SD | Fonctionne | This part is already in mainline QEMU. Use the "-sd cardimagegoeshere" switch to point QEMU to the card image. The regular QEMU monitor commands for removable media can also be used. The card works, however the on-chip host controller gave block length errors on heavy I/O despite working as described in specification. I suspect the kernel driver. DMA operation is not tested. |
Bluetooth | Fonctionne | A generic Bluetooth HCI (just like the BlueCore4 chip) is connected to internal USB hub (just like the Delta DBFM dongle). Currently qemu emulates no other bluetooth devices, so the dongle behaves as if there was no BT-enabled slaves around, being the only device on the piconet, i.e. is not really useful. Likely a Bluetooth keyboard will be emulated. A physical Bluetooth dongle can also be attached to the emulator (see USB documentation in QEMU). |
GSM | Fonctionne | A fake modem is connected to UART0 understanding a (currently quite limited) subset of AT commands. Ultimately it should support as much functionality as possible (basic AT command set, fake GPRS connections, dialing and SMS send/receive). This way all parts of the phone subsystem (CALYPSO, TWL3014, TRF6151) will not have to be emulated. There is a possibility to wire a real GSM modem to QEMU's serial port, or the phonesim modem simulator from the Qtopia project (use the --enable-phonesim switch to ./configure) as well as the atinterface modem emulator, also from Qtopia. |
AGPS | To Do | There are obvious difficulties emulating the chip, but hopefully it can be made to present the guest OS with some fixed coordinates later when more is known about the chip. Again a real chip could be connected to QEMU's serial port. |
Current development is aiming for GTA01Bv4 compatibility; earlier revisions can also be emulated if needed. The differences between the hardware revisions currently only manifest themselves in GPIO wiring. Hardware emulation is implemented in a clean-room manner using official specifications where possible.
La seconde version des téléphones Openmoko, les Neo FreeRunner (GTA02) ont vu plusieurs changements et améliorations materiels depuis le Neo1973 (GTA01). Qemu a un support complet du GTA01 (premier modèle), mais une émulation partielle du GTA02 est aussi plannifiée. Ceci doit inclure seulement les composants qui ont été ajoutés dans GTA02 et qui n'étaient pas présents dans GTA01.
Ce que cela veut dire c'est que la machine émulée ne sera pas intérieurement exactement comme le NeoFreeRunner, mais sera fonctionnellement la même. Ceci signifie par ailleurs qu'il faut un noyau modifié puisqu'il s'agit plus d'un GTA01 à l'intérieur. La source du noyau sera fournie comme un composant de qemu. Le bootloader utilisé sera le u-boot du GTA01.
Cette approche est appelée paravirtualisation et est souvent utilisée comme une solution d'émulation pour plateformes mobiles. Pour un programmeur en espace utilisateur (Développeurs d'applications), la machine sera visible comme un GTA02. Pour un kernel hacker, cela sera une plateforme modifiée.
S'il y a une initiative parmis les utilisateurs pour émuler plus précisément qu'expliqué ici le matériel du GTA02, patches/amélioration seront toujours bienvenues puisque le projet Qemu cherche à émuler le matériel réel et être aussi proche que possible du matériel réel (en d'autres mots, l'émulation totale est préférée à la paravirtualisation dans Qemu).
Vous trouverez ci-dessous un résumé succint concernant l'état d'aboutissement de la couche d'émulation associée à chacun des composants.
Hardware | Status | Informations complémentaires |
---|---|---|
GTA01 hardware | ||
Processeur, périphériques intégrés et externes | Fonctionnels | Voir le tableau du matériel fonctionnel sur le GTA01 ci-dessus. Ces composants constituent le fondement de l'émulateur du FreeRunner. Les mêmes informations s'appliquent. |
GTA02 components | ||
GPS | Fonctionnel | Un processeur GPS virtuel est connecté au second port série de la machine virtuelle, comme sur le Neo FreeRunner. |
WLAN | Fonctionne partiellement | Le circuit Atheros AR6001 (deuxième révision du micro-logiciel) est émulé jusqu'à la détection par la couche SDIO du noyau et le référencement d'une interface réseau par le pilote Atheros. La communication réseau n'est pas encore fonctionnelle. L'émulation basique du bus SDIO est complète. |
Acceleromètres | Fonctionnels | Deux faux accéléromètres sont connectés au bus I2C de la machine virtuelle. Ils fournissent une lecture constante de 1G d'accélération. Une amélioration à creuser (lorsque des logiciels de test seront disponibles) serait de fournir les mouvements de la fenêtre X-Window comme entrées aux accéléromètres : en bougeant la fenêtre on génèrerait des événements d'accélération. Ces événements seraient à deux dimensions mais cela suffirait pour les tests des développeurs d'applications. |
Ces instructions parlent de l'émulateur du GTA01 (par défaut).
C'est le moyen le plus simple de construire qemu-neo1973 puisque vous n'aurez pas besoin de compiler et d'effectuer les initialisations de la mémoire flash vous-même. Pour plus d'informations, voir MokoMakefile.
Si vous voulez juste compiler QEMU et utiliser les images officielles, tapez simplement "make qemu". Cela évite de paramétrer monotone et openembedded ainsi que de créer une image complète avec MokoMakefile. Dans ce cas la compilation prend moins de temps que les instructions ci-dessous puisque tout est automatisé.
To obtain the latest source code for the emulator, you will want to do something like the following:
$ svn checkout https://svn.openmoko.org/trunk/src/host/qemu-neo1973 $ cd qemu-neo1973
Now, we're going to configure and build the emulator (Note Requirements below):
$ ./configure --target-list=arm-softmmu # GCC 3.x will be required, see --cc= $ make
If you dont want gcc-3.x then you can apply patch from here https://bugs.gentoo.org/show_bug.cgi?id=160627 like so
$ patch -p2 < quemu-gcc4.patch
See other available options for the configure script by appending "--help". Now you should have a working emulator under the name "arm-softmmu/qemu-system-arm". To run Openmoko you will also need to somehow install Openmoko on your virtual phone, which is totally clean of any software at this moment. There are several block devices to choose from, the best option is probably to do exactly what the Neo1973 manufacturer does before it ships the device to the final user. This process is described in Bootloader, Kernel, NAND bad blocks and Devirginator but you don't need to know all the details. Two scripts are provided to generate a firmware for your phone, as realistic as possible. First run
$ openmoko/download.sh
which will look up the list of latest available Openmoko snapshot builds from buildhost.openmoko.org and choose the most recent u-boot, Kernel, and root filesystem images, and download the images (unless they are already found in the openmoko/ directory). These binaries will be used by the flash.sh script. First make sure you have the netpbm package installed for some graphics conversion utilities. On Ubuntu this can be done by:
sudo apt-get install netpbm
Then run:
$ openmoko/flash.sh
which runs the emulator, loads u-boot into it and then uses u-boot's capability to program the Flash memory to install all the necessary parts of the system into the virtual Flash. It will also set up all the bootloading process including a boot menu (ENTER is [AUX] and SPACE is [POWER]), splash, u-boot environment and some default kernel parameters. If everything goes OK, the script should print a command which you can use to start using the emulator.
QEMU has *tons* of commandline switches and things that can be configured. You can look them up in QEMU user docs. You will probably want to use the "-snapshot" switch, among other ones. Saving and restoring emulation state at any point (unrelated to "-snapshot") should work as per QEMU user docs too. In addition the monitor commands "help" and "info" are of great help. The monitor usually sits in second virtual console, thus ctrl-alt-2 and ctrl-alt-1 switch to monitor and back.
Win32 binaries shipped with firmware can be downloaded from openmoko-emulator-win32-bin-20070625.zip. Tested on MS Windows XP and Vista Business.
Les instructions pour exécuter l'émulateur sont les mêmes pour le FreeRunner, mais la ligne de commande finale pour invoquer Qemu change. Au lieu de "-M gta01" comme nom de machine "-M gta02fake" doit être utilisé.
Le noyau supportant l'émulateur GTA02 est optenu en appliquant le patch openmoko/linux-gta02-pseudo.patch disponible dans les sources de qemu-neo1973 au noyau openmoko 2.6.24 (vanilla linux-2.6.24 + le patchset de [1]). Comme le support du noyau GTA02 est toujours en développement intensif, référez vous au fichier openmoko/README dans les sources de qemu-neo1973 pour les dernières instructions sur comment construire le noyau.
Si un noyau normal d'Openmoko est utilisé avec l'émulateur Neo FreeRunner, il s'exécutera simplement comme si la machine était un GTA01 sans détecter les nouveaux périphériques.
déclenche qemu et ouvre un socket unix pour la communication. Les paramètres additionnels sont envoyés à qemu. (i.e. openmoko/qemu-auto.sh -nographic déclenche la machine virtuelle sans couche graphique etc.).
créée une image de la carte SD avec une partition contenant les fichiers indiqués (vous pouvez fournir une liste de fichiers en argument) et l'ajouter au téléphone. Le noyau Openmoko devrait le détecter et le démon automount devrait monter la partition. openmoko/qemu-auto.sh doit déjà tourner pour cela. Si vous ne fournissez pas d'argument, le script éjecte la carte (le noyau OM ne détecte malheureusement pas cela). Cela fonctionnera uniquement avec l'émulation gta01 car en mode gta02 il n'y a pas de carte SD émulée.
Eteint la machine virtuelle proprement.
tente de connecter le bus esclave S3C à la couche HCD émulée (si cette couche fonctionne et que gadgetfs est monté).
This QEMU tree has only been tested on GNU/Linux. To get graphical (not counting VNC) and/or audio output from the emulator you will need either SDL or Cocoa installed on your computer. To enable audio, see the available switches to the ./configure script.
The scripts that sit in openmoko/ require lynx, wget, python, netpbm and most GNU base utilities installed in standard locations. The netpbm package contains tools necessary for bootsplash image conversion.
All of the build-time and run-time requirements listed in QEMU documentation apply. This includes zlib, etc. On distributions that use binary packages, remember that you need the packages ending in -dev or -devel.
QEMU lets you debug operating system kernels and bootloaders like you debug all other programs. To do this you will need a debugger that speaks the GDB remote debugging protocol - GDB is the obvious choice. Some cross toolchains come with GDB already set up. Otherwise building cross-GDB yourself is quick and easy (compared to building binutils and cross-gcc).
To debug u-boot, load the file "u-boot" into gdb (not "u-boot.bin") that is produced by "make" when building u-boot. To debug a Linux kernel, load the file "vmlinux" from the main source directory into gdb. These files are in ELF format and contain all the symbol information and are not stripped of debugging data until you run "strip" on them, unlike "u-boot.bin" and "Image"/"zImage"/"uImage". Next, tell QEMU to enable the gdbserver by appending the "-s" switch or issuing "gdbserver" in the monitor. Use the command(gdb) target remote localhost:1234to make a connection to the emulator. From there you should be able to use all the usual GDB commands, including stepping instructions, setting breakpoints, watchpoints, inspecting stack, variables, registers and more. If gdb is running in the same directory from which it grabbed the ELF executable, the "edit" command should work so you can jump right to the source line which is executing.
One simple way to get a network connection from the emulated Neo is via an emulated serial port and pppd. Add -serial vc -serial pty to the QEMU command line, and QEMU prints a device name on a line like "char device redirected to /dev/pts/12".
On the Neo side, open a terminal and run the command "pppd nodetach debug /dev/ttySAC1".
On the host computer side, open a root terminal and run the command "pppd nodetach debug 192.168.68.1:192.168.68.2 noauth /dev/pts/12", substituting the actual device name from above.
Now on the host computer side, you should be able to "ping 192.168.68.2" and "ssh root@192.168.68.2".
NB : If you see in pppd trace something like this "Received bad configure-rej: 12 06 00 00 00 00" again and again, you will ping but no application will work. It is probably the compression protocol (ccp) negotiation which fail. Add "noccp" to the two pppd commands like "pppd nodetach debug noccp /dev/ttySAC1".
Before you start, you have to have a working pppd or USB connection, (see the previous chapter and the next chapter)
(I assume that your local ip-adress is 192.168.0.100 and your router is 192.168.0.1)
In qemu terminal (or via ssh) type:
$ ifdown usb0 $ route add default gw 192.168.68.1
Edit /etc/resolv.conf: nameserver 192.168.0.1 This will be your host-computer DNS server.
On the host-computer type(as root , use sudo -i on ubuntu):
echo 1 >> /proc/sys/net/ipv4/ip_forward echo 1 >> /proc/sys/net/ipv4/ip_dynaddr modprobe ip_tables modprobe iptable_nat modprobe ipt_MASQUERADE iptables -t filter -F iptables -t nat -F iptables -t filter -P INPUT ACCEPT iptables -t filter -P FORWARD ACCEPT iptables -t filter -P OUTPUT ACCEPT iptables -t nat -P PREROUTING ACCEPT iptables -t nat -P POSTROUTING ACCEPT iptables -t nat -A POSTROUTING -o eth0 -s 192.168.68.0/24 -j MASQUERADE
(Where eth0 is your network interface connected to the router)
Thats it - now you can enjoy internet in qemu.
It is possible (although not very straight forward, probably about the complexity of tun-tap networking) to connect the virtual, emulated Neo1973 to the Linux PC on which the emulator is running, and work with it as if a real Neo1973 was plugged into the computer's USB port, but no twiddling with cables is needed. If you're testing your applications on the Neo, it may be worth setting up this kind of connection because it lets you enable normal networking between the PC and the phone and ssh into it (which is much more comfortable than typing commands into the Openmoko's terminal emulator via on-screen keyboard). Here's what you will need in order to get this working:
A Linux host with a 2.6 series kernel. The following drivers compiled-in or in modules: dummy_hcd, gadgetfs, usbnet, cdc_ether. A detailed guide to building the necessary modules is available (primarily Ubuntu focused). Generic instructions follow.
Note that you need root access to perform most actions described here. Here's how to enable the drivers in menuconfig.
Find and enable Device Drivers -> USB support -> USB Gadget Support -> Support for USB Gadgets
Find Device Drivers -> USB support -> USB Gadget Support -> USB Peripheral Controller and set it to Dummy HCD (DEVELOPMENT)
Find and enable Device Drivers -> USB support -> USB Gadget Support -> Gadget Filesystem (EXPERIMENTAL) (this one is good to have as a module)
Find and enable Device Drivers -> USB support -> USB Network Adapters -> Multi-purpose USB Networking Framework
(in 2.6.25 (from ???) Device Drivers -> Network device support -> USB Network Adapters -> Multi-purpose USB Networking Framework)
Find and enable Device Drivers -> USB support -> USB Network Adapters -> Multi-purpose USB Networking Framework -> CDC Ethernet support (smart devices such as cable modems)
(in 2.6.25 (from ???) Device Drivers -> Network device support -> USB Network Adapters -> Multi-purpose USB Networking Framework -> CDC Ethernet support (smart devices such as cable modems))
These last two drivers are the same drivers that you need to work with a real Neo over USB network. After you've built the drivers, make sure that the copy of kernel headers in /usr/include/linux is up to date. In particular the file /usr/include/linux/usb_gadgetfs.h needs to be present and if your distribution came with headers older than 2.6.18 or so, then you need tell the package manager to update them, or you can do that manually with
# cp -a /usr/src/linux/include/linux/* /usr/include/linux/
(assuming that your kernel sources are in /usr/src/linux). It is important that this is done before building qemu because the build system checks if these headers are functional and in case they aren't found it will disable the USB Slave functionality. Run "grep CONFIG_GADGETFS config-host.h" in qemu build directory to make sure that the detection succeeded. If it didn't, correct your linux headers and reconfigure qemu.
After building qemu and before running it, make sure that the modules are loaded into the kernel. I found it useful to load gadgetfs with the following command:
# modprobe gadgetfs default_uid=1000 # assuming my User ID is 1000
and added the following line to my /etc/fstab:
gadget /dev/gadget gadgetfs noauto,user,group 0 0
Make sure that the mountpoint /dev/gadget exists:
# mkdir -p /dev/gadget
After that the rest of the procedure can be performed from your regular user account. Mounting gadgetfs is done with:
$ mount /dev/gadget
The "default_uid" parameter changes the ownership on all files under /dev/gadget to your own and since the files there are created and destroyed dynamically, there's no easy way to have that performed by udev. Now running qemu as you usually do but appending "-usb -usbgadget" (in the current version of the MokoMakefile this is not included) should enable the USB Slave functionality. The qemu monitor commands "info usbslave" and "usb_add gadget" will be useful. The former instruction asks the OS running under the emulator (Openmoko) to describe its slave features (that's what lsusb does after a Neo1973 is connected to a PC). You can see the available USB configurations in this command's output. Since gadgetfs allows only one configuration, we will need to choose the desired configuration - most device have only one such configuration, in which case you can use just "usb_add gadget" to connect to host; CDC ethernet devices however usually include a second configuration for RNDIS networking (i.e. Ms Windows compatibility) and so does Openmoko when using the g_ether driver. Hence, to get this right, wait for Openmoko to fully boot up and execute the following in QEMU monitor:
QEMU 0.9.0 monitor - type 'help' for more information (qemu) info usbslave USB2.2 device 1457:5122: Manufacturer: Linux 2.6.20.7-moko8/s3c2410_udc Product: RNDIS/Ethernet Gadget Configuration 0: RNDIS Configuration 1: CDC Ethernet (qemu) (qemu) usb_add gadget:1
If qemu gives "couldn't add device gadget:1", double-check that it was built against gadgetfs - the file config-host.h must contain the line "#define CONFIG_GADGETFS 1".
The "1" in "usb_add gadget:N" is the number of the USB configuration that we want to use. If everything went correctly - you can check that in dmesg - you should now have a new network interface called usb0 on the PC, through which you can talk to the Openmoko running in QEMU:
$ dmesg | tail <6>gadgetfs: bound to dummy_udc driver <7>hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101 <6>usb 3-1: new high speed USB device using dummy_hcd and address 3 <6>gadgetfs: connected <7>usb 3-1: default language 0x0409 <7>usb 3-1: new device strings: Mfr=1, Product=2, SerialNumber=0 <6>usb 3-1: Product: RNDIS/Ethernet Gadget <6>usb 3-1: Manufacturer: Linux 2.6.20.7-moko8/s3c2410_udc <6>usb 3-1: configuration #1 chosen from 1 choice <7>usb 3-1: adding 3-1:1.0 (config #1, interface 0) <7>usb 3-1:1.0: uevent <7>cdc_ether 3-1:1.0: usb_probe_interface - got id <7>cdc_ether 3-1:1.0: status ep3in, 16 bytes period 14 <7>usb 3-1: adding 3-1:1.1 (config #1, interface 1) <7>usb 3-1:1.1: uevent $ su - Password: # tail /var/log/everything/current May 8 19:25:32 [kernel] gadgetfs: connected May 8 19:25:32 [kernel] gadgetfs: disconnected May 8 19:25:32 [kernel] gadgetfs: configuration #1 May 8 19:25:32 [kernel] usb0: register 'cdc_ether' at usb-dummy_hcd-1, CDC Ethernet Device, 52:e7:eb:76:0a:d0 # lsusb -vvv Bus 003 Device 003: ID 1457:5122 Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 2 Communications bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x1457 idProduct 0x5122 bcdDevice 2.12 iManufacturer 1 Linux 2.6.20.7-moko8/s3c2410_udc iProduct 2 RNDIS/Ethernet Gadget iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 80 bNumInterfaces 2 bConfigurationValue 1 iConfiguration 7 CDC Ethernet bmAttributes 0xc0 Self Powered MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 2 Communications bInterfaceSubClass 6 Ethernet Networking bInterfaceProtocol 0 iInterface 5 CDC Communications Control CDC Header: bcdCDC 1.10 CDC Union: bMasterInterface 0 bSlaveInterface 1 CDC Ethernet: iMacAddress 3 52E7EB760AD0 bmEthernetStatistics 0x00000000 wMaxSegmentSize 1514 wNumberMCFilters 0x0000 bNumberPowerFilters 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0010 1x 16 bytes bInterval 14 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 0 bInterfaceClass 10 Data bInterfaceSubClass 0 Unused bInterfaceProtocol 0 iInterface 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 1 bNumEndpoints 2 bInterfaceClass 10 Data bInterfaceSubClass 0 Unused bInterfaceProtocol 0 iInterface 4 Ethernet Data Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 2 Communications bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 bNumConfigurations 1 # ifconfig usb0 inet 192.168.0.200 netmask 255.255.255.0 # exit $ ssh root@192.168.0.202 The authenticity of host '192.168.0.202 (192.168.0.202)' can't be established. RSA key fingerprint is de:21:87:93:52:1c:6b:c7:69:29:6c:af:66:50:02:02. Are you sure you want to continue connecting (yes/no)? yes Warning: Permanently added '192.168.0.202' (RSA) to the list of known hosts. root@192.168.0.202's password: root@fic-gta01:~$ uname -a Linux fic-gta01 2.6.20.7-moko8 #1 PREEMPT Wed Apr 25 11:13:52 UTC 2007 armv4tl unknown
If you add the option -serial telnet:localhost:1200,server to QEMU will create a telnet server on port 1200 that you can connect to as the serial port.
This will allow you to experiment with u-boot configuration without risking to brick the real device.
Please note that QEMU will wait for you to connect to the telnet server at port 1200 before starting the emulation.
(use the command telnet localhost 1200 to establish the connection)
![]() |
Languages: |
English • العربية • Български • Česky • Dansk • Deutsch • Esperanto • Eesti • Español • فارسی • Suomi • Français • עברית • Magyar • Italiano • 한국어 • Nederlands • Norsk (bokmål) • Polski • Português • Română • Русский • Svenska • Slovenčina • Українська • 中文(中国大陆) • 中文(台灣) • Euskara • Català |