Neo FreeRunner Wifi
From Openmoko
m (english) |
|||
Line 1: | Line 1: | ||
− | To get wlan working | + | To get wlan working with your NeoFreerunner, you can follow these steps: |
− | 1. create and edit a suitable /etc/wpa_supplicant/wpa_supplicant.conf (use your favourite search engine to | + | 1. create and edit a suitable /etc/wpa_supplicant/wpa_supplicant.conf (use your favourite search engine to get known the syntax) |
2. execute `ifup eth0` | 2. execute `ifup eth0` | ||
− | 3. execute `wpa_supplicant -ieth0 -c/etc/wpa_supplicant/wpa_supplicant.conf` ( | + | 3. execute `wpa_supplicant -ieth0 -c/etc/wpa_supplicant/wpa_supplicant.conf` (you can add a & for running in background) |
4. get a IP via dhcp: `udhcpc eth0` | 4. get a IP via dhcp: `udhcpc eth0` | ||
− | + | that's it, your wlan should work | |
+ | |||
+ | Sample wpa_supplicant.conf: | ||
+ | |||
+ | ctrl_interface=/var/run/wpa_supplicant | ||
+ | eapol_version=1 | ||
+ | ap_scan=1 | ||
+ | |||
+ | # WPA2: | ||
+ | network={ | ||
+ | ssid="your ssid" | ||
+ | scan_ssid=1 | ||
+ | proto=RSN | ||
+ | key_mgmt=WPA-PSK | ||
+ | pairwise=CCMP TKIP | ||
+ | group=TKIP CCMP | ||
+ | psk="secret key" | ||
+ | } | ||
+ | |||
+ | # WPA: | ||
+ | network = { | ||
+ | ssid="your_ssid" | ||
+ | scan_ssid=1 | ||
+ | psk"secret key" | ||
+ | priority=10 | ||
+ | } | ||
+ | |||
+ | # WEP: | ||
+ | network = { | ||
+ | ssid="meine_ssid" | ||
+ | scan_ssid=1 | ||
+ | key_mgmt=NONE | ||
+ | wep_tx_keyidx=0 | ||
+ | wep_key0="mein key" | ||
+ | priority=8 | ||
+ | } | ||
+ | |||
+ | # Open: | ||
+ | network={ | ||
+ | ssid="massinger" | ||
+ | key_mgmt=NONE | ||
+ | priority=5 | ||
+ | } |
Revision as of 19:02, 3 July 2008
To get wlan working with your NeoFreerunner, you can follow these steps:
1. create and edit a suitable /etc/wpa_supplicant/wpa_supplicant.conf (use your favourite search engine to get known the syntax)
2. execute `ifup eth0`
3. execute `wpa_supplicant -ieth0 -c/etc/wpa_supplicant/wpa_supplicant.conf` (you can add a & for running in background)
4. get a IP via dhcp: `udhcpc eth0`
that's it, your wlan should work
Sample wpa_supplicant.conf:
ctrl_interface=/var/run/wpa_supplicant eapol_version=1 ap_scan=1 # WPA2: network={ ssid="your ssid" scan_ssid=1 proto=RSN key_mgmt=WPA-PSK pairwise=CCMP TKIP group=TKIP CCMP psk="secret key" } # WPA: network = { ssid="your_ssid" scan_ssid=1 psk"secret key" priority=10 } # WEP: network = { ssid="meine_ssid" scan_ssid=1 key_mgmt=NONE wep_tx_keyidx=0 wep_key0="mein key" priority=8 } # Open: network={ ssid="massinger" key_mgmt=NONE priority=5 }