View source for Analog wired Headset Sony Ericsson
From Openmoko
You do not have permission to edit this page, for the following reasons:
You can view and copy the source of this page:
Return to Analog wired Headset Sony Ericsson.
You do not have permission to edit this page, for the following reasons:
You can view and copy the source of this page:
Return to Analog wired Headset Sony Ericsson.
The pinout of some Headsets delivered by Sony Ericsson are known to use a different pin layout. The layout could is as following (unconfirmed, measuring the pins shows some strange interconections):
This pinout is not compatible to Neo. To use this headsets you have to rewire them which requires soldering or usage of a simple adater doing the transformation (however, i currently do not know of any existing).
The following sections describe the modifications made to a headset originally delivered with a P910i (there is a small number "Y536Z" inside the case, but i dont know if this is significant).
The modification can be made with the following steps (take care to have a quick but steady hand, the soldering on the image is quite dirty because i had to solder several times):