USB Networking with openSUSE
From Openmoko
Contents |
YaST in openSUSE 10.2
Set up USB interface
First, you must specify the characteristics of the USB connection as a network device. This can be done through YaST. Choose:
YaST -> Network Devices -> Network Card
The network configuration utility will ask you to choose between a setup based on the Network Manager app, or by using ifup. These instructions were written with the latter chosen, though it may very well work using the Network Manager. In the next menu, you will see a list of network devices. If YaST recognizes the connected Freerunner, there will be one device with a name like "RNDIS ethernet gadget". You may select "Edit" to configure this device, or, if it is not present, "Add" it and continue.
In the "Edit" dialog, under the "address" tab, choose "Static Address Setup" and set:
IP Address = 192.168.0.200
and
Subnet Mask = 255.255.255.0
Note: If your network setup has the IP range 192.168.0.x already in use, there will be connectivity problems. Next, under the "General" tab for this device, set:
Firewall Zone -> Internal Zone (Unprotected)
This will allow for the configuration of the firewall, which comes later. Click "Next" to finish configuring this device. (Your primary network device, usually eth0, may be set to use DHCP for addressing, but must have its firewall zone set to "External Zone".) Choose "Finish" in the Configuration Overview to complete the setup and restart networking.
