Neo FreeRunner Wifi
From Openmoko
(Difference between revisions)
| Line 29: | Line 29: | ||
} | } | ||
| − | # WPA: | + | # WPA: |
| − | network = { | + | network = { |
| − | ssid="your_ssid" | + | ssid="your_ssid" |
| − | scan_ssid=1 | + | scan_ssid=1 |
| − | psk"secret key" | + | psk="secret key" |
| − | priority=10 | + | priority=10 |
| − | } | + | } |
| − | # WEP: | + | # WEP: |
| − | network = { | + | network = { |
| − | ssid="your_ssid" | + | ssid="your_ssid" |
| − | scan_ssid=1 | + | scan_ssid=1 |
| − | key_mgmt=NONE | + | key_mgmt=NONE |
| − | wep_tx_keyidx=0 | + | wep_tx_keyidx=0 |
| − | wep_key0="secret key" | + | wep_key0="secret key" |
| − | priority=8 | + | priority=8 |
} | } | ||
| − | # Open: | + | # Open: |
| − | network={ | + | network={ |
| − | ssid=" | + | ssid="your ssid" |
| − | key_mgmt=NONE | + | key_mgmt=NONE |
| − | priority=5 | + | priority=5 |
} | } | ||
Revision as of 19:06, 3 July 2008
To get wlan working with your NeoFreerunner, you can follow these steps:
1. create and edit a suitable /etc/wpa_supplicant/wpa_supplicant.conf (use your favourite search engine to get known the syntax)
2. execute `ifup eth0`
3. execute `wpa_supplicant -ieth0 -c/etc/wpa_supplicant/wpa_supplicant.conf` (you can add a & for running in background)
4. get a IP via dhcp: `udhcpc eth0`
that's it, your wlan should work
Sample wpa_supplicant.conf:
ctrl_interface=/var/run/wpa_supplicant
eapol_version=1
ap_scan=1
# WPA2:
network={
ssid="your ssid"
scan_ssid=1
proto=RSN
key_mgmt=WPA-PSK
pairwise=CCMP TKIP
group=TKIP CCMP
psk="secret key"
priority=50
}
# WPA:
network = {
ssid="your_ssid"
scan_ssid=1
psk="secret key"
priority=10
}
# WEP:
network = {
ssid="your_ssid"
scan_ssid=1
key_mgmt=NONE
wep_tx_keyidx=0
wep_key0="secret key"
priority=8
}
# Open:
network={
ssid="your ssid"
key_mgmt=NONE
priority=5
}
