Neo 1973 hardware
From Openmoko
HaraldWelte (Talk | contribs) (add history, restructure page) |
HaraldWelte (Talk | contribs) (add pcb photographs of GTA01Bv3) |
||
| Line 1: | Line 1: | ||
| + | [[Image:Gta01b v3 top.jpg|thumb|400px|display (top) side]] | ||
| + | [[Image:Gta01b v3 bottom.jpg|thumb|400px|component (back) side]] | ||
== Main components == | == Main components == | ||
=== Processor === | === Processor === | ||
Revision as of 17:22, 6 February 2007
Contents |
Main components
Processor
Samsung S3C2410A @ 266 MHz
Flash
64MB Samsung NAND flash attached to S3C2410 NAND controller
RAM
128MB SDRAM
GSM/GPRS
The GSM/GPRS modem is Texas Instruments Calypso based
AGPS
Hammerhead AGPS from Global Locate
SD-Card
microSD aka Transflash
Bluetooth
Audio
Wolfson Codec
Analog wired Headset
There's a four-ring 2.5mm stereo jack which provides connectivity to old-fashined wired headsets.
The headsets used by Motorola smartphones (A780,A1200, ...) have a compatible configuration
Bluetooth Headset
This one is wired via PCM bus from the CSR Bluetooth chip to the Wolfson codec.
History
GTA01v3
This was the initial hardware revision that was provided to the software team.
GTA01v4
This was a slightly improved version of the hardware, though still with a number of serious bugs.
GTA01Bv2
This was the first hardware that (after applying some post-production hotfixes) worked completely.
GTA01Bv3
This is the hardware revision that we ship during Phase-0.
GTA01Bv4
This is the hardware revision that we ship in Phase-1
