Manuals/Neo FreeRunner/nl

From Openmoko

(Difference between revisions)
Jump to: navigation, search
(→‎De Inhoud van het Pakket)
Line 15: Line 15:
 
|}
 
|}
 
</div>
 
</div>
 +
 +
 +
==Getting To Know the Neo FreeRunner==
 +
 +
<div align-center>
 +
<table width="80%" style="clear: both; border: 1px solid #ffffff; border-collapse: collapse; padding: 0.2em; margin: 0; font-size: 100%; margin: 0 1px;">
 +
<tr valign="top" style="background: #ffffff">
 +
<td style="width: 25px; padding-left: 0.5em;">
 +
</td>
 +
<td style="width: 10px; white-space: nowrap; padding: 4px 1em 0 0.5em; border-right: 1px solid #ffffff;">[[Image:menu8.jpg|370px|thumb|AUX Button and phone jack(From left to right)|center]]</td><td style="padding: 1px 1em 0; background: #ffffff;">
 +
[[Image:menu9.jpg|365px|thumb|Power Button, USB and external GPS Antenna (From left to right)|center]]</td></tr></table>
 +
</div>
 +
 +
<div align-center>
 +
<table width="80%" style="clear: both; border: 1px solid #ffffff; border-collapse: collapse; padding: 0.2em; margin: 0; font-size: 100%; margin: 0 1px;">
 +
<tr valign="top" style="background: #ffffff">
 +
<td style="width: 50%; padding-left: 0.5em;">
 +
</td>
 +
<td style="width: 50%; white-space: nowrap; padding: 4px 1em 0 0.5em; border-right: 1px solid #ffffff;">[[Image:menu12.jpg|233px|thumb|AUX Back side with battery|center]]</td><td style="padding: 1px 1em 0; background: #ffffff;">
 +
[[Image:menu11.jpg|260px|thumb|Put the SIM card and SD card here|center]]</td></tr></table>
 +
</div>
 +
 +
<div align-center>
 +
<table width="80%" style="clear: both; border: 1px solid #ffffff; border-collapse: collapse; padding: 0.2em; margin: 0; font-size: 100%; margin: 0 1px;">
 +
<tr valign="top" style="background: #ffffff">
 +
<td style="width: 50%; padding-left: 0.5em;">
 +
</td>
 +
<td style="width: 50%; white-space: nowrap; padding: 4px 1em 0 0.5em; border-right: 1px solid #ffffff;">[[Image:menu13.jpg|233px|thumb|open case from this side |center]]</td><td style="padding: 1px 1em 0; background: #ffffff;">
 +
[[Image:menu14.jpg|250px|thumb|Opened|center]]</td></tr></table>
 +
</div>
 +
 +
===Installing the Micro-SD card, the SIM card, and the Battery ===
 +
 +
# Remove the rear cover of the Neo FreeRunner by first holding the Neo FreeRunner on the side and then use your fingernail to prise off the rear cover at the slot on top of the device.
 +
# Now you should be able to locate the combined SIM and Micro-SD card holder at the bottom of the battery compartment.
 +
# Unlock the SIM card holder by sliding the metal clip down, towards the USB socket, with your fingernail. Use caution, as these parts are delicate and could be damaged by forcing them in the wrong direction.
 +
# Lift up on the SIM card holder.
 +
# The Micro-SD card holder is held in place by a latch on either side.  It is easiest to open the Micro-SD card holder by releasing these latches one at a time rather than by lifting from the middle, as lifting from the middle tends to increase the latching pressure.  A small screwdriver or knife can be used for this.
 +
# Insert the Micro-SD card into the Micro-SD card holder.  Note that the electrical contacts should face down and towards the edge of the Neo Freerunner.
 +
# Close the Micro-SD card holder, making sure that both latches are securely fastened.
 +
# Insert the SIM card into the SIM card holder, taking care to slide inside the two metal tabs in the cover.  Please note that the electrical contacts should face down and that the cut corner should be closest to the external GPS Antenna Socket.
 +
# Close the SIM card holder and lock it by sliding the metal clip towards the external GPS Antenna Socket on the FreeRunner.
 +
# Insert the battery into the battery compartment, aligning the electrical contacts on the battery with the electrical contacts in the battery compartment.  Insert the side with the electrical contacts first.
 +
# Replace the rear cover on the FreeRunner.
 +
 +
===Turning on the Neo Freerunner===
 +
 +
====Charging the Neo Freerunner====
 +
 +
When using the Neo Freerunner for the first time, you should charge the battery completely. The battery can be charged using the provided charger or from a powered USB port capable of providing 500mA worth of power.  Most computers will be able to charge the FreeRunner without any problems.
 +
 +
Charging at 100mA takes 6-12 hours and at 500mA takes 1-2 hours. (from [http://openmoko.togaware.com/survivor/Charging.html openmoko.togaware.com])
 +
 +
You can boot your Neo FreeRunner in the following ways:
 +
 +
: [[Image:Circle２.gif|10px]]    You can power it up into an Openmoko image directly.
 +
 +
: [[Image:Circle２.gif|10px]]    You can boot it into [[Bootloader|U-Boot]] via [[NAND Flash]].
 +
 +
: [[Image:Circle２.gif|10px]]    You can boot it into U-Boot via NOR Flash.
 +
 +
Booting the device into NAND and NOR Flash allows you to update the kernel and root filesystem.
 +
 +
====Start the Openmoko Image====
 +
 +
<div align-center>
 +
<table width="100%" style="clear: both; border: 1px solid #ffffff; border-collapse: collapse; padding: 0.2em; margin: 0; font-size: 100%; margin: 0 1px;">
 +
<tr valign="top" style="background: #ffffff">
 +
<td style="width: 25px; padding-left: 0.5em;">
 +
 +
</td>
 +
<td style="width: 10px; white-space: nowrap; padding: 4px 1em 0 0.5em; border-right: 1px solid #ffffff;">[[Image:Menu2.jpg|200px|right|thumb]]</td><td style="padding: 1px 1em 0; background: #eeeeee;">
 +
Press and hold Power button for about 8 seconds, until the Openmoko splash screen turns up.  You may now release the Power button and the Neo FreeRunner will continue to boot into the Openmoko Image.
 +
 +
</td></tr></table>
 +
</div>
 +
 +
====Log into U-Boot in the NAND Flash====
 +
 +
<div align-center>
 +
<table width="100%" style="clear: both; border: 1px solid #ffffff; border-collapse: collapse; padding: 0.2em; margin: 0; font-size: 100%; margin: 0 1px;">
 +
<tr valign="top" style="background: #ffffff">
 +
<td style="width: 25px; padding-left: 0.5em;">
 +
 +
</td>
 +
<td style="width: 10px; white-space: nowrap; padding: 4px 1em 0 0.5em; border-right: 1px solid #ffffff;">[[Image:Menu7.jpg|200px|right|thumb]]</td><td style="padding: 1px 1em 0; background: #eeeeee;">
 +
Press and hold Power button, then press and hold AUX button for about 5 to 8 seconds. You should see the boot menu for the NAND Flash.  Press the AUX button to select one of the options and then press the Power button to execute.
 +
</td></tr></table>
 +
</div>
 +
 +
====Log into U-Boot in the NOR Flash====
 +
 +
<div align-center>
 +
<table width="100%" style="clear: both; border: 1px solid #ffffff; border-collapse: collapse; padding: 0.2em; margin: 0; font-size: 100%; margin: 0 1px;">
 +
<tr valign="top" style="background: #ffffff">
 +
<td style="width: 25px; padding-left: 0.5em;">
 +
 +
</td>
 +
<td style="width: 10px; white-space: nowrap; padding: 4px 1em 0 0.5em; border-right: 1px solid #ffffff;">[[Image:Menu6.jpg|200px|right|thumb]]</td><td style="padding: 1px 1em 0; background: #eeeeee;">
 +
 +
Press and hold the AUX button, then press and hold the Power button. Then, release the AUX button. You should see the boot menu for the NOR Flash.  This option is usually used by developers or when flashing the FreeRunner.  If you cannot log into U-Boot in NAND then you can log into U-Boot in the NOR Flash either.
 +
</td></tr></table>
 +
</div>
 +
 +
{{note| There are six options you can choose when you log into the NOR Flash.
 +
1. Boot
 +
 +
2. [[Boot from sd card|Boot from MicroSD]]
 +
 +
3. Set console to USB
 +
 +
4. Set console to Serial
 +
 +
5. Reset
 +
 +
6. Power off
 +
 +
}}
 +
 +
===Unlocking the screen===
 +
 +
When the screen is locked, you should see a Matrix-style green graphic with the Openmoko symbol in the middle of the bottom of the screen along with lock and unlock symbols.  If you drag the Openmoko symbol to the unlock symbol at the top then the screen will become unlocked.

Revision as of 12:58, 8 July 2008

Contents

De Inhoud van het Pakket

In de doos
Circle２.gif Neo FreeRunner
Circle２.gif Stylus
Circle２.gif Batterij
Circle２.gif Lader
Circle２.gif USB Kabel
Circle２.gif microSD Kaart van 512MB


Getting To Know the Neo FreeRunner

AUX Button and phone jack(From left to right)
Power Button, USB and external GPS Antenna (From left to right)
AUX Back side with battery
Put the SIM card and SD card here
open case from this side
Opened

Installing the Micro-SD card, the SIM card, and the Battery

  1. Remove the rear cover of the Neo FreeRunner by first holding the Neo FreeRunner on the side and then use your fingernail to prise off the rear cover at the slot on top of the device.
  2. Now you should be able to locate the combined SIM and Micro-SD card holder at the bottom of the battery compartment.
  3. Unlock the SIM card holder by sliding the metal clip down, towards the USB socket, with your fingernail. Use caution, as these parts are delicate and could be damaged by forcing them in the wrong direction.
  4. Lift up on the SIM card holder.
  5. The Micro-SD card holder is held in place by a latch on either side. It is easiest to open the Micro-SD card holder by releasing these latches one at a time rather than by lifting from the middle, as lifting from the middle tends to increase the latching pressure. A small screwdriver or knife can be used for this.
  6. Insert the Micro-SD card into the Micro-SD card holder. Note that the electrical contacts should face down and towards the edge of the Neo Freerunner.
  7. Close the Micro-SD card holder, making sure that both latches are securely fastened.
  8. Insert the SIM card into the SIM card holder, taking care to slide inside the two metal tabs in the cover. Please note that the electrical contacts should face down and that the cut corner should be closest to the external GPS Antenna Socket.
  9. Close the SIM card holder and lock it by sliding the metal clip towards the external GPS Antenna Socket on the FreeRunner.
  10. Insert the battery into the battery compartment, aligning the electrical contacts on the battery with the electrical contacts in the battery compartment. Insert the side with the electrical contacts first.
  11. Replace the rear cover on the FreeRunner.

Turning on the Neo Freerunner

Charging the Neo Freerunner

When using the Neo Freerunner for the first time, you should charge the battery completely. The battery can be charged using the provided charger or from a powered USB port capable of providing 500mA worth of power. Most computers will be able to charge the FreeRunner without any problems.

Charging at 100mA takes 6-12 hours and at 500mA takes 1-2 hours. (from openmoko.togaware.com)

You can boot your Neo FreeRunner in the following ways:

Circle２.gif You can power it up into an Openmoko image directly.
Circle２.gif You can boot it into U-Boot via NAND Flash.
Circle２.gif You can boot it into U-Boot via NOR Flash.

Booting the device into NAND and NOR Flash allows you to update the kernel and root filesystem.

Start the Openmoko Image

Menu2.jpg

Press and hold Power button for about 8 seconds, until the Openmoko splash screen turns up. You may now release the Power button and the Neo FreeRunner will continue to boot into the Openmoko Image.

Log into U-Boot in the NAND Flash

Menu7.jpg

Press and hold Power button, then press and hold AUX button for about 5 to 8 seconds. You should see the boot menu for the NAND Flash. Press the AUX button to select one of the options and then press the Power button to execute.

Log into U-Boot in the NOR Flash

Menu6.jpg

Press and hold the AUX button, then press and hold the Power button. Then, release the AUX button. You should see the boot menu for the NOR Flash. This option is usually used by developers or when flashing the FreeRunner. If you cannot log into U-Boot in NAND then you can log into U-Boot in the NOR Flash either.

NOTE: There are six options you can choose when you log into the NOR Flash.

1. Boot

2. Boot from MicroSD

3. Set console to USB

4. Set console to Serial

5. Reset

6. Power off



Unlocking the screen

When the screen is locked, you should see a Matrix-style green graphic with the Openmoko symbol in the middle of the bottom of the screen along with lock and unlock symbols. If you drag the Openmoko symbol to the unlock symbol at the top then the screen will become unlocked.

Retrieved from "http://openmoko.org/index.php?title=Manuals/Neo_FreeRunner/nl&oldid=38307"
Views
Personal tools

De Inhoud van het Pakket

In de doos
Circle２.gif Neo FreeRunner
Circle２.gif Stylus
Circle２.gif Batterij
Circle２.gif Lader
Circle２.gif USB Kabel
Circle２.gif microSD Kaart van 512MB
Tools