View source for Headset

From Openmoko

Jump to: navigation, search

You do not have permission to edit this page, for the following reasons:

  • The action you have requested is limited to users in the group: Administrators.
  • You must confirm your email address before editing pages. Please set and validate your email address through your user preferences.

You can view and copy the source of this page:

Template used on this page:

Return to Headset.

Personal tools


There's a four-ring 2.5mm stereo jack which provides connectivity to old-fashioned wired headsets.

The headsets used by Motorola smartphones (A780,A1200, ...) and the V-360 have a compatible configuration.

The headsets used by some Nokia phones (N95, ...) have the same jack but they are incompatible. For technical information about rewiring them visit Analog wired Headset Nokia.

Pinout: [1]

base = ground 
speaker left  (internal impedance 33R) to ground. (+jackinsert detection)
speaker right (internal impedance 33R) to ground.
tip = mic electret condenser type, to ground. 
      bias (power for mic) 2K2 from +3.3v(wolfson codec) 
      (+HoldButton shortcircuit to ground)

Known working adapters

Tester Product Seller How it works
TimoJyrinki MP35A  Koss KSC-35 headphones, Altec Lansing inMotion iM4 speakers and car audio via AUX - all work great, if the mixer settings are changed like guided below. One can notice the lack of real quality sound with the headphones, but it's mostly fine for any casual listening. Definitely the output is not ideal/natural because of the high-pass filtering effect from the hardware issue and then artificially boosting low frequencies to compensate.

Audio quality

You probably want to fix mixer settings to overcome the poor low-frequency output, see FreeRunner Hardware Issues for instructions.

Test Scope

To test Headset functionality

Test Duration

Test Environment

  1. Neo FreeRunner plus April Software Update
  2. FIC GTA02 battery
  3. SIM card
  4. Headset AP

Test Cases

Test Case #1