Gentoo/ru

From Openmoko

(Difference between revisions)
Jump to: navigation, search
m
Line 1: Line 1:
 +
{{Languages|Gentoo}}
 
Все про Gentoo
 
Все про Gentoo
−
Overview
+
== Overview ==
 +
Gentoo armv4tl-softfloat-linux-gnueabi optimalized for Openmoko (-Os -march=armv4t -mtune=arm920t) on 2008.0/arm profile (glibc based, sane bootstrapable toolchain)<br>
 +
(embedded uclibc/arm profile armv4tl-softfloat-linux-uclibcgnueabi in plans)
  
−
Gentoo armv4tl-softfloat-linux-gnueabi оптимизирован под Openmoko (-Os -march=armv4t -mtune=arm920t) в профиле 2008.0/arm (основан на glibc, sane bootstrapable toolchain)
+
 
−
(embedded uclibc/arm profile armv4tl-softfloat-linux-uclibcgnueabi в планах)
+
== Read first ==
 +
'''http://www.gentoo.org/doc/en/handbook/handbook-arm.xml''' (Skip points 2 and 3)
 +
 
 +
 
 +
== Needed things ==
 +
 
 +
*Gentoo stage: http://torindel.sezamkowa.net/openmoko/armv4tl-softfloat-linux-gnueabi/~arm/
 +
*Portage snapshot: look for mirror on: http://www.gentoo.org/main/en/mirrors2.xml and get snapshots/portage-DATE.tar.bz2
 +
*Kernel and modules
 +
*Any working Openmoko distro
 +
 
 +
 
 +
== Installation ==
 +
*Partition your sd card if needed (don`t make swap partitions, ensure card isn't mounted)
 +
:<tt>e.g.</tt> <pre>fdisk /dev/mmcblk0</pre>
 +
*Make ext2 or ext3 filesystem
 +
:<tt>e.g.</tt> <pre>mkfs.ext2 /dev/mmcblk0p1</pre>
 +
*Mount partition
 +
:<tt>e.g.</tt> <pre>mount /dev/mmcblk0p1 /media/card</pre>
 +
*Copy stage and portage from host to moko
 +
:<tt>e.g. (on localhost)</tt> <pre>scp stage3-armv4tl-*.tar.bz2 portage-*.tar.bz2 root@openmoko:/media/card</pre>
 +
*Unpack stage and portage
 +
:<tt>e.g.</tt>
 +
<pre>
 +
tar -xjpf /media/card/stage3-armv4tl-*.tar.bz2 -C /media/card
 +
tar -xjpf /media/card/portage-*.tar.bz2 -C /media/card/usr
 +
</pre>
 +
*Cleanup removing tar.bz2
 +
:<tt>e.g.</tt> <pre>rm /media/card/stage3-armv4tl-*.tar.bz2 /media/card/portage-*.tar.bz2</pre>
 +
*Chroot
 +
:<tt>e.g.</tt> <pre>chroot /media/card /bin/bash</pre>
 +
*Update chroot environment
 +
:<tt>e.g.</tt> <pre>source /etc/profiles; env-update</pre>
 +
*Set timezone
 +
:<tt>e.g.</tt> <pre>cp /usr/zoneinfo/YOURZONE /etc/localtime</pre>
 +
*Set hostname
 +
:<tt>e.g.</tt> <pre>nano /etc/conf.d/hostname</pre>
 +
*Remove console font changing (small is beautiful ;])
 +
:<tt>e.g.</tt> <pre>nano /etc/conf.d/consolefont</pre> (hash consolefont= line)
 +
*Setup fstab
 +
:<tt>e.g.</tt> <pre>nano /etc/fstab</pre>
 +
*Edit inittab (hash out c3, c4, c5, c6, s0, s1 lines)
 +
:<tt>e.g.</tt> <pre>nano /etc/inittab</pre>
 +
*Setup usb networking
 +
:<tt>e.g.</tt>
 +
<pre>
 +
ln -s /etc/init.d/net.lo /etc/init.d/net.usb0
 +
echo "config_usb0=( \"192.168.0.202 netmask 255.255.255.0\" )" > /etc/conf.d/net
 +
echo "routes_usb0=\"default via 192.168.0.200\"" >> /etc/conf.d/net
 +
echo "nameserver 192.168.0.200" > /etc/resolv.conf
 +
</pre>
 +
*Enable sshd
 +
:<tt>e.g.</tt> <pre>rc-update add sshd default</pre>
 +
*Change root password
 +
:<tt>e.g.</tt> <pre>passwd</pre>
 +
*Leave chroot
 +
:<tt>e.g.</tt> <pre>exit</pre>
 +
*Copy kernel
 +
*Copy modules
 +
*Setup uboot for booting from sd card
 +
*Reboot
 +
*Setup/emerge rest of the system
 +
 
 +
== Emerging binary packages ==
 +
*Add PORTAGE_BINHOST to make.conf
 +
:<tt>e.g.</tt> <pre>echo "PORTAGE_BINHOST=\"http://torindel.sezamkowa.net/openmoko/armv4tl-softfloat-linux-gnueabi/~arm/packages/All\"" >> /etc/make.conf</pre>
 +
*Update environment
 +
:<tt>e.g.</tt> <pre>source /etc/profiles; env-update</pre>
 +
*Setup install mask if you don't want compiler headers/docs etc (mask headers only if you'll be always using binary packages)
 +
:<tt>e.g.</tt> <pre>export INSTALL_MASK="*.h"</pre>
 +
*Emerge packages with -kG
 +
:<tt>e.g.</tt> <pre>emerge -kG syslog-ng</pre>
 +
 
 +
 
 +
== Binary package wishlist ==
 +
As i'll be adding some packages to ftp above you might want to ask for some package here: [[GentooPackageWishList]]<br>
 +
Overlay with moko things and more packages coming soon.
 +
[[category:Technical]]

Revision as of 12:53, 8 September 2008

Geographylogo.png Languages:

English •  العربية •  Български •  Česky •  Dansk •  Deutsch •  Esperanto •  Eesti •  Español •  فارسی •  Suomi •  Français •  עברית •  Magyar •  Italiano •  한국어 •  Nederlands •  ‪Norsk (bokmål)‬ •  Polski •  Português •  Română •  Русский •  Svenska •  Slovenčina •  Українська •  ‪中文(中国大陆)‬ •  ‪中文(台灣)‬ •  Euskara •  Català

Все про Gentoo

Contents

Overview

Gentoo armv4tl-softfloat-linux-gnueabi optimalized for Openmoko (-Os -march=armv4t -mtune=arm920t) on 2008.0/arm profile (glibc based, sane bootstrapable toolchain)
(embedded uclibc/arm profile armv4tl-softfloat-linux-uclibcgnueabi in plans)


Read first

http://www.gentoo.org/doc/en/handbook/handbook-arm.xml (Skip points 2 and 3)


Needed things


Installation

  • Partition your sd card if needed (don`t make swap partitions, ensure card isn't mounted)
e.g. 
fdisk /dev/mmcblk0
  • Make ext2 or ext3 filesystem
e.g. 
mkfs.ext2 /dev/mmcblk0p1
  • Mount partition
e.g. 
mount /dev/mmcblk0p1 /media/card
  • Copy stage and portage from host to moko
e.g. (on localhost) 
scp stage3-armv4tl-*.tar.bz2 portage-*.tar.bz2 root@openmoko:/media/card
  • Unpack stage and portage
e.g. 
tar -xjpf /media/card/stage3-armv4tl-*.tar.bz2 -C /media/card
tar -xjpf /media/card/portage-*.tar.bz2 -C /media/card/usr
  • Cleanup removing tar.bz2
e.g. 
rm /media/card/stage3-armv4tl-*.tar.bz2 /media/card/portage-*.tar.bz2
  • Chroot
e.g. 
chroot /media/card /bin/bash
  • Update chroot environment
e.g. 
source /etc/profiles; env-update
  • Set timezone
e.g. 
cp /usr/zoneinfo/YOURZONE /etc/localtime
  • Set hostname
e.g. 
nano /etc/conf.d/hostname
  • Remove console font changing (small is beautiful ;])
e.g. 
nano /etc/conf.d/consolefont
(hash consolefont= line)
  • Setup fstab
e.g. 
nano /etc/fstab
  • Edit inittab (hash out c3, c4, c5, c6, s0, s1 lines)
e.g. 
nano /etc/inittab
  • Setup usb networking
e.g. 
ln -s /etc/init.d/net.lo /etc/init.d/net.usb0
echo "config_usb0=( \"192.168.0.202 netmask 255.255.255.0\" )" > /etc/conf.d/net
echo "routes_usb0=\"default via 192.168.0.200\"" >> /etc/conf.d/net
echo "nameserver 192.168.0.200" > /etc/resolv.conf
  • Enable sshd
e.g. 
rc-update add sshd default
  • Change root password
e.g. 
passwd
  • Leave chroot
e.g. 
exit
  • Copy kernel
  • Copy modules
  • Setup uboot for booting from sd card
  • Reboot
  • Setup/emerge rest of the system

Emerging binary packages

  • Add PORTAGE_BINHOST to make.conf
e.g. 
echo "PORTAGE_BINHOST=\"http://torindel.sezamkowa.net/openmoko/armv4tl-softfloat-linux-gnueabi/~arm/packages/All\"" >> /etc/make.conf
  • Update environment
e.g. 
source /etc/profiles; env-update
  • Setup install mask if you don't want compiler headers/docs etc (mask headers only if you'll be always using binary packages)
e.g. 
export INSTALL_MASK="*.h"
  • Emerge packages with -kG
e.g. 
emerge -kG syslog-ng


Binary package wishlist

As i'll be adding some packages to ftp above you might want to ask for some package here: GentooPackageWishList
Overlay with moko things and more packages coming soon.

Retrieved from "http://openmoko.org/index.php?title=Gentoo/ru&oldid=52731"
Personal tools
Geographylogo.png Languages:

English •  العربية •  Български •  Česky •  Dansk •  Deutsch •  Esperanto •  Eesti •  Español •  فارسی •  Suomi •  Français •  עברית •  Magyar •  Italiano •  한국어 •  Nederlands •  ‪Norsk (bokmål)‬ •  Polski •  Português •  Română •  Русский •  Svenska •  Slovenčina •  Українська •  ‪中文(中国大陆)‬ •  ‪中文(台灣)‬ •  Euskara •  Català

Все про Gentoo

Overview

Gentoo armv4tl-softfloat-linux-gnueabi optimalized for Openmoko (-Os -march=armv4t -mtune=arm920t) on 2008.0/arm profile (glibc based, sane bootstrapable toolchain)
(embedded uclibc/arm profile armv4tl-softfloat-linux-uclibcgnueabi in plans)


Read first

http://www.gentoo.org/doc/en/handbook/handbook-arm.xml (Skip points 2 and 3)


Needed things


Installation

  • Partition your sd card if needed (don`t make swap partitions, ensure card isn't mounted)
e.g. 
fdisk /dev/mmcblk0
  • Make ext2 or ext3 filesystem
e.g. 
mkfs.ext2 /dev/mmcblk0p1
  • Mount partition
e.g. 
mount /dev/mmcblk0p1 /media/card
  • Copy stage and portage from host to moko
e.g. (on localhost) 
scp stage3-armv4tl-*.tar.bz2 portage-*.tar.bz2 root@openmoko:/media/card
  • Unpack stage and portage
e.g. 
tar -xjpf /media/card/stage3-armv4tl-*.tar.bz2 -C /media/card
tar -xjpf /media/card/portage-*.tar.bz2 -C /media/card/usr
  • Cleanup removing tar.bz2
e.g. 
rm /media/card/stage3-armv4tl-*.tar.bz2 /media/card/portage-*.tar.bz2
  • Chroot
e.g. 
chroot /media/card /bin/bash
  • Update chroot environment
e.g. 
source /etc/profiles; env-update
  • Set timezone
e.g. 
cp /usr/zoneinfo/YOURZONE /etc/localtime
  • Set hostname
e.g. 
nano /etc/conf.d/hostname
  • Remove console font changing (small is beautiful ;])
e.g. 
nano /etc/conf.d/consolefont
(hash consolefont= line)
  • Setup fstab
e.g. 
nano /etc/fstab
  • Edit inittab (hash out c3, c4, c5, c6, s0, s1 lines)
e.g. 
nano /etc/inittab
  • Setup usb networking
e.g. 
ln -s /etc/init.d/net.lo /etc/init.d/net.usb0
echo "config_usb0=( \"192.168.0.202 netmask 255.255.255.0\" )" > /etc/conf.d/net
echo "routes_usb0=\"default via 192.168.0.200\"" >> /etc/conf.d/net
echo "nameserver 192.168.0.200" > /etc/resolv.conf
  • Enable sshd
e.g. 
rc-update add sshd default
  • Change root password
e.g. 
passwd
  • Leave chroot
e.g. 
exit
  • Copy kernel
  • Copy modules
  • Setup uboot for booting from sd card
  • Reboot
  • Setup/emerge rest of the system

Emerging binary packages

  • Add PORTAGE_BINHOST to make.conf
e.g. 
echo "PORTAGE_BINHOST=\"http://torindel.sezamkowa.net/openmoko/armv4tl-softfloat-linux-gnueabi/~arm/packages/All\"" >> /etc/make.conf
  • Update environment
e.g. 
source /etc/profiles; env-update
  • Setup install mask if you don't want compiler headers/docs etc (mask headers only if you'll be always using binary packages)
e.g. 
export INSTALL_MASK="*.h"
  • Emerge packages with -kG
e.g. 
emerge -kG syslog-ng


Binary package wishlist

As i'll be adding some packages to ftp above you might want to ask for some package here: GentooPackageWishList
Overlay with moko things and more packages coming soon.