GPS on the Neo 1973

Revision as of 22:35, 2 July 2007

The Neo1973 device contains an integrated GPS. The particular device is marketed as an AGPS, and there is some discussion available as to what significance that "A" might have.

As of P1, a binary-only program for talking to the the GPS is available in /home/root/DM2/gps, (and presumably, the same binary would function on a P0 device). There is an ongoing effort to write a Free Software program that could be used instead of this binary-only program. See Hammerhead/Protocol for details and the latest status.

In the meantime, Pavel Machek provides the following script for recording an NMEA stream from the binary program:

#!/bin/sh
echo 1 > /sys/class/leds/gta01\:vibrator/brightness
killall gllin cat
sleep 1
echo 0 > /sys/class/leds/gta01\:vibrator/brightness
mknod /tmp/nmeaNP p
cat /tmp/nmeaNP >> /tmp/gps.nmea &
/home/root/DM2/gps/gllin -low 5
/home/root/DM2/gps/gllin -periodic 3

He also succeeded at getting the Neo1973 to act like a bluetooth GPS with the following script: (Note that this script has bad problems if you run it more than once. You can get a "time traveling GPS" effect, with the GPS showing you your past position).

#!/bin/sh
killall rfcomm tail
mknod /dev/rfcomm0 c 216 0
echo 1 > /sys/devices/platform/s3c2410-i2c/i2c-0/0-0008/gta01-pm-bt.0/power_on
sleep 1
hciconfig hci0 up name linuxgps
sleep 1
sdpd
sleep 1
sdptool add SP
(
        while true; do
        rfcomm listen /dev/rfcomm0 1
        sleep 1
        done
) &
(
        while true; do
            tail -f /tmp/gps.nmea > /dev/rfcomm0
            echo 1 > /sys/class/leds/gta01\:vibrator/brightness
            sleep 1
            echo 0 > /sys/class/leds/gta01\:vibrator/brightness
        done
) &

As people develop more sophisticated GPS applications, please note them here.

Here are some ideas for possibilites:

• Cairo-based mapping

• Routing

• Openstreetmap logger, (with voice annotations)

See openstreetmap - this is a page which needs fleshed out to a proper application page.