Flashing the Neo FreeRunner

From Openmoko

(Difference between revisions)
Jump to: navigation, search
(Flashing the Kernel)
(Quick Step-By-Step Summary: spelling)
 
(99 intermediate revisions by 52 users not shown)
Line 1: Line 1:
Openmoko regularly releases updated versions of the Openmoko root filesystem, the [[kernel]], and the [[Bootloader| U-Boot]] as binary images. These may be programmed into the Flash memory (NAND) of Neo FreeRunner. For that, you can use the USB cable and another computer which will run an Openmoko provided tool to flash the Neo FreeRunner "through" USB.
+
{{Languages|Flashing_the_Neo_FreeRunner}}
 +
Most of the software on the Neo FreeRunner can be updated or changed. The root filesystem, the [[kernel]], and the [[Bootloader]] can be modified with the program [[dfu-util]] from a computer. This page does not describe flashing the [[NOR Flash]] which requires a [[debug board]]. See [[Flashing NOR]] for this procedure.  
  
== Overview ==
+
The [[NAND Flash]] is divided into 3 partitions for the bootloader, kernel, and root filesystem. Each component can be flashed separately.  
All the components of the software in the FreeRunner are bundled together into binary images.
+
  
On a desktop computer when you want to replace the operating system (OS), you would boot it from a CD-ROM drive, then copy OS files from the CD to the internal hard drive. The FreeRunner does not have a CD-ROM drive and files must typically be re-written/flashed directly into internal storage (NAND flash). It is also possible to load all the OS files to and boot from a microSD.
+
The '''bootloader''' is a small program that runs first and starts everything else when the FreeRunner is powered on. The bootloader is independent of the distribution you use.
 +
The '''kernel''' and the '''root filesystem''' are provided by the distribution.  
  
The FreeRunner has two kinds of internal program storage: NOR flash and NAND flash. The NOR flash is small and stores only a special boot program used when you need to re-write the contents of the NAND flash. NAND flash acts more like a hard drive.
+
'''Before you start: Erasing the root filesystem or flashing the bootloader are radical measures. Take the time to ponder the necessity. Sometimes problems can be fixed by only updating the kernel.'''
  
The NAND Flash is divided into 3 partitions for the bootloader, kernel, and root filesystem - so each of these components can be flashed separately. For example if you are trying to install a modified kernel, you only have to follow the steps to flash the kernel image.
+
== Image files to flash into FreeRunner memory ==
  
* '''bootloader''': a small program that runs first and starts everything else when the FreeRunner is powered on or reset (depending on [[Booting the Neo FreeRunner|how you reset it]], the version from NOR or NAND is booted).
+
There are separate image files for all 3 software components. In most cases you will need to install a Kernel (uImage) and a Root Filesystem (rootfs). In rare cases, when there is a bug you need fixed, you will also install a new bootloader.
* '''kernel''': the central component in the Linux operating system.
+
* '''root filesystem''': contains all the files that make up the commands and applications that you can run.
+
+
'''Before you start: Erasing the root filesystem or flashing the uboot are radical measures. Take the time to ponder the necessity. Sometimes problems can be fixed by updating only the kernel.'''
+
 
+
== Alternative : running from microSD card ==
+
 
+
You may install this distribution on the microSD card, in order to [[Booting from SD | boot from microSD card]]. That allows you to keep another distribution installed in NAND (for instance to test 2008.08 while still having 2007.2 for default boot).
+
 
+
== Collect the things you need ==
+
 
+
=== Download the DFU-util program ===
+
 
+
You will download that program on your desktop computer. It will allow you to connect to the FreeRunner through the USB cable and control its bootloader. That connection uses a special protocol which addresses the bootloader's interface, and differs from USB networking. There is a separate page to describe it in more detail: [[dfu-util]].
+
 
+
'''Note:''' dfu-util seems to consistently fail with a "-62" error on 64-bit Linux. If you have access to a 32-bit machine, use it instead!
+
 
+
'''MacOS X:''' [[MacOS_X#Graphical_Flashing_with_Openmoko_Flasher]]
+
 
+
'''Linux:''' http://buildhost.openmoko.org/releases/Freerunner/dfu-util
+
 
+
Make sure it is executable by setting the permissions with this command: chmod a+x dfu-util
+
 
+
'''Windows:''' http://projects.openmoko.org/frs/?group_id=166&release_id=162
+
 
+
See additional driver installation instructions for Windows at [[Dfu-util-windows]]
+
 
+
=== Download the image files that you will need ===
+
 
+
Exactly what files you need depends on what you are trying to install. In most cases you will need to install a Kernel (uImage) and a Root Filesystem (rootfs). In rare cases, when there is a bug you need fixed, you will also install a new bootloader.
+
  
 
Please read [[Distributions]] for choosing the distribution which fits your needs, and then see [[Download]] for downloading.
 
Please read [[Distributions]] for choosing the distribution which fits your needs, and then see [[Download]] for downloading.
 
== Boot the FreeRunner from NOR Flash ==
 
 
[[Image:menu15.jpg|thumb|Booting from NOR Flash]]
 
 
# Read the other sections of this page first, because you will have 30 seconds to enter the flashing commands, come back here when ready.
 
# Do not connect the USB cable from the PC to your Neo FreeRunner yet (disconnect it).
 
# Boot your Neo Freerunner into the NOR uBoot menu for flashing.
 
## Press and hold AUX button
 
## Press the Power button until the boot menu comes up
 
## This menu is labelled '''*** BOOT MENU (NOR) ***'''
 
## See also [[Booting the Neo FreeRunner]]
 
# Stay in NOR uBoot menu, do not to select or enter any item in menu. Now you will be able to flash, make backups of your Freerunner or query the Freerunner with dfu-util.
 
# The FreeRunner only stays at the NOR boot prompt for about 30 seconds and then shuts off unless you do something.
 
# Connect your Neo to the GNU/Linux or Windows host via a USB cable.
 
# Now you can enter the dfu-util commands on your PC as described below.
 
# If the Neo FreeRunner turns off before you press start flashing ('''screen goes black'''), go back to step 2. If you start flashing in time, the phone will not turn off meanwhile.
 
 
<!-- The following, upto dfu-util -l is taken from the thread "Re: Freerunner (GTK2007.2) has suddenly become unbootable" on the Support list. -->
 
 
Note that the dfu-util connection does '''not''' use Ethernet over USB - that is, you should not attempt to set up a usb0 network interface on your GNU/Linux host desktop (on Windows, you need a DFU class driver, or you can use the LibUSB-Win32 driver described on the [[Dfu-util-windows]] page). The dfu-util utility sets up its own connection to the FreeRunner. In fact, you will not be able to make an Ethernet-over-USB connection to the FreeRunner when it is at the uBoot menu; this type of connection is only available when the FreeRunner has booted fully.
 
 
After connecting the FreeRunner to your host via USB cable, you can test whether dfu-util "sees" the FreeRunner by executing:
 
 
  dfu-util -l
 
If you get error messages from the dfu-util command then try again. Often it works on the second try.
 
  
 
== Do a backup ==
 
== Do a backup ==
  
If you have a working image that you're happy with but want to try something different, you should probably do a [[Pre-Flash Backup]].
+
If you have a working image that you're happy with but want to try something different, you should probably do a [[Backup]].
  
 
== Using dfu-util ==
 
== Using dfu-util ==
  
dfu-util can be used to read flash memory, write memory, and get information from the device.
+
[[Dfu-util]] is a command-line tool to flash the FreeRunner. It is available for Linux, MacOS X, and Windows. DFU-util allows you to connect to the FreeRunner through the USB cable and control its bootloader. That connection uses a special protocol which addresses the bootloader's interface, and differs from USB networking. For more details, see the separate [[dfu-util]] page.
  
This is the general command format to write an image file to a (predefined) "partition name" (referred to as ''altsetting'' in dfu-util help/manual) :
+
See [[Manuals/Dfu-util]]
  
dfu-util -a ''altsetting'' -R -D ''file_name''
+
=== NeoTool (GUI) ===
  
where:<br>
+
Instead of the command-line-based DFU-util, you can use NeoTool, a graphical tool for flashing the FreeRunner: see the [[NeoTool]] page.
-a ''altsetting'' : Specify the altsetting of the DFU interface by name or by number<br>
+
-: Issue USB Reset signalling once we're finished<br>
+
-D  ''file_name'' : Write firmware from ''file_name'' into device
+
  
On Linux, you run dfu-util from a command shell prompt. If you have not put it somewhere on your command path you probably need to prefix it with a "./" like this '''./dfu-util'''.
+
=== DFUScript - A command line script to simplify dfu-util ===
On some systems you need to be root before this will work and on Ubuntu you must preface the command with "sudo" or you will get the following error: "Cannot claim interface: could not claim interface 2: Operation not permitted"
+
  
On Windows, you need to open a command window and run from a command line. Use Start-Run Program and type "cmd" to open a Window.
+
DFUScript was developed to assist users who have multiple devices in using dfu-util via the command line. Information on where to download and use DFUScript can be found on [[DFUScript]].
  
More detailed manual for gfu-util is available here : [[Dfu-util]]
+
== Alternative: using nandwrite ==
  
== Flashing the Kernel ==
+
This approach involves writing the '''rootfs''' into nand directly on the phone from a system already running on it, not necessarily via usb from a computer.
  
The command format is  
+
If you have a system running from a different partition that you intend to flash (for example sd card), you can use nandwrite to do the work, which is much faster (it takes about 30s to write a 59MB jffs2 image).
  
dfu-util -a kernel -R -D ''/path/to/uImage''
+
See [[Nandwrite]] for more information.
  
When flashing succeeds the following will be shown:
+
== Optional: Verifying boot-loader version ==
  
status(0) = No error condition is present
+
<!-- The following should probably be moved to [[Bootloader_versions]], IMHO -->
Done!
+
 
+
Flashing may fail with an error -110. This indicates that the kernel is too big for the default kernel partition. uboot can be used to change the size of the default partitions on the device
+
 
+
== Flashing the Root Filesystem ==
+
 
+
The root filesystem has to be an image in jffs2 format. If the file you downloaded is zipped or compressed (has a .gz or .zip extension) you have to uncompress it first.
+
 
+
The command format is
+
 
+
dfu-util -a rootfs -R -D ''rootfs_filename.jffs2''
+
 
+
where ''rootfs_filename.jffs2'' is the name of the file containing the root filesystem.
+
 
+
When flashing succeeds the following will be shown:
+
 
+
status(0) = No error condition is present
+
Done!
+
 
+
== Flashing the boot loader to the NAND==
+
 
+
The boot loader (U-boot) file should have a .bin extension. As with the root filesystem, if the file you downloaded is zipped or compressed (has a .gz or .zip extension) you have to uncompress it first.
+
 
+
The command format is
+
 
+
dfu-util -a u-boot -R -D ''uboot.bin''
+
 
+
where ''uboot.bin'' is the name of the boot loader binary image file.
+
 
+
''Reminder'': You should have [[Flashing_the_Neo_FreeRunner#Boot_the_FreeRunner_from_NOR_Flash|boot from NOR first]], in order to flash the boot-loader in NAND. After flashing succesfully, make sure you reboot from NAND's newly flashed boot loader, to benefit from the updates.
+
  
 
<!-- Taken from posts by Mikael Berthe <mikael.berthe@lilotux.net> and Torfinn Ingolfsen <tingox@gmail.com> to Support list, subject: Re: Upgrading u-boot needed ? -->
 
<!-- Taken from posts by Mikael Berthe <mikael.berthe@lilotux.net> and Torfinn Ingolfsen <tingox@gmail.com> to Support list, subject: Re: Upgrading u-boot needed ? -->
Line 142: Line 53:
 
   root@om-gta02:~# grep  Bootloader /dev/mtdblock0
 
   root@om-gta02:~# grep  Bootloader /dev/mtdblock0
 
   Neo1973 Bootloader U-Boot 1.3.2-moko12
 
   Neo1973 Bootloader U-Boot 1.3.2-moko12
 +
<!-- ENDS ... subject: Re: Upgrading u-boot needed ? -->
  
<!-- ENDS ... subject: Re: Upgrading u-boot needed ? -->
+
== Troubleshooting ==
 +
 
 +
Okay, so you just reflashed. The splash screen pops up, but uBoot fail to load the kernel, and return to boot menu. WTF?
 +
 
 +
* It is likely that the wrong bits went to the wrong place. Try reflashing just the kernel, double checking that you select the uImage.bin kernel file, not the u-boot.bin bootloader file.
 +
* Try redownloading and reflashing the kernel, checking file integrity with the MD5 hash sums.
  
== Reboot the FreeRunner from NAND ==
+
== Quick Step-By-Step Summary ==
  
You should now be able to boot into the new images.
+
# Press AUX button first, hold it and press Power button. Wait until NOR flash U-Boot menu appears. You recognize it from the orange Openmoko logo. On the top it should usually say "U-Boot 1.3.2-moko12 (May 9 2008 - 10:28:48)".
 +
# Attach USB cable
 +
# Type the following commands, before the Neo automatically powers down
  
Pay attention '''to booting from the NAND flash this time''', in particular if you upgraded the boot-loader (in short: 1. press and hold ''power button'' down, and then 2. press ''aux button'')
+
  # Flash u-boot
 +
  dfu-util -a u-boot -R -D /path/to/u-boot_image
 +
  # Flash the kernel
 +
  dfu-util -a kernel -R -D /path/to/uImage.bin
 +
  # Flash the rootfs
 +
  dfu-util -a rootfs -R -D /path/to/rootfs.jffs2
  
The boot menu should be labelled '''*** BOOT MENU (NAND) ***''' this time (see [[Booting#Log_into_U-Boot_in_the_NAND_Flash|booting from NAND]] for more detailed instructions).
+
If needed, specify extra device specifying parameter -d [[USB Product IDs|0x1d50:0x5119]] to the dfu-util.
  
 
[[Category:Flashing Openmoko| ]]
 
[[Category:Flashing Openmoko| ]]

Latest revision as of 07:51, 10 February 2012

Most of the software on the Neo FreeRunner can be updated or changed. The root filesystem, the kernel, and the Bootloader can be modified with the program dfu-util from a computer. This page does not describe flashing the NOR Flash which requires a debug board. See Flashing NOR for this procedure.

The NAND Flash is divided into 3 partitions for the bootloader, kernel, and root filesystem. Each component can be flashed separately.

The bootloader is a small program that runs first and starts everything else when the FreeRunner is powered on. The bootloader is independent of the distribution you use. The kernel and the root filesystem are provided by the distribution.

Before you start: Erasing the root filesystem or flashing the bootloader are radical measures. Take the time to ponder the necessity. Sometimes problems can be fixed by only updating the kernel.

Contents

[edit] Image files to flash into FreeRunner memory

There are separate image files for all 3 software components. In most cases you will need to install a Kernel (uImage) and a Root Filesystem (rootfs). In rare cases, when there is a bug you need fixed, you will also install a new bootloader.

Please read Distributions for choosing the distribution which fits your needs, and then see Download for downloading.

[edit] Do a backup

If you have a working image that you're happy with but want to try something different, you should probably do a Backup.

[edit] Using dfu-util

Dfu-util is a command-line tool to flash the FreeRunner. It is available for Linux, MacOS X, and Windows. DFU-util allows you to connect to the FreeRunner through the USB cable and control its bootloader. That connection uses a special protocol which addresses the bootloader's interface, and differs from USB networking. For more details, see the separate dfu-util page.

See Manuals/Dfu-util

[edit] NeoTool (GUI)

Instead of the command-line-based DFU-util, you can use NeoTool, a graphical tool for flashing the FreeRunner: see the NeoTool page.

[edit] DFUScript - A command line script to simplify dfu-util

DFUScript was developed to assist users who have multiple devices in using dfu-util via the command line. Information on where to download and use DFUScript can be found on DFUScript.

[edit] Alternative: using nandwrite

This approach involves writing the rootfs into nand directly on the phone from a system already running on it, not necessarily via usb from a computer.

If you have a system running from a different partition that you intend to flash (for example sd card), you can use nandwrite to do the work, which is much faster (it takes about 30s to write a 59MB jffs2 image).

See Nandwrite for more information.

[edit] Optional: Verifying boot-loader version

(Optional) After an upgrade, you may wish to check that the u-boot version matches the one you have just flashed. You can use 'grep Bootloader /dev/mtdblock1' from a shell on the FreeRunner (and possibly the 1973 as well) to get the NAND u-boot version, like this:

  root@om-gta02:~# grep Bootloader /dev/mtdblock1
  Neo1973 Bootloader U-Boot 1.3.2+gitr18+64eb10cab8055084ae25ea4e73b66dd03cc1a0cb

You can grep for the same string in /dev/mtdblock0 to retrieve the NOR u-boot version:

  root@om-gta02:~# grep  Bootloader /dev/mtdblock0
  Neo1973 Bootloader U-Boot 1.3.2-moko12

[edit] Troubleshooting

Okay, so you just reflashed. The splash screen pops up, but uBoot fail to load the kernel, and return to boot menu. WTF?

  • It is likely that the wrong bits went to the wrong place. Try reflashing just the kernel, double checking that you select the uImage.bin kernel file, not the u-boot.bin bootloader file.
  • Try redownloading and reflashing the kernel, checking file integrity with the MD5 hash sums.

[edit] Quick Step-By-Step Summary

  1. Press AUX button first, hold it and press Power button. Wait until NOR flash U-Boot menu appears. You recognize it from the orange Openmoko logo. On the top it should usually say "U-Boot 1.3.2-moko12 (May 9 2008 - 10:28:48)".
  2. Attach USB cable
  3. Type the following commands, before the Neo automatically powers down
  # Flash u-boot
  dfu-util -a u-boot -R -D /path/to/u-boot_image
  # Flash the kernel
  dfu-util -a kernel -R -D /path/to/uImage.bin
  # Flash the rootfs
  dfu-util -a rootfs -R -D /path/to/rootfs.jffs2

If needed, specify extra device specifying parameter -d 0x1d50:0x5119 to the dfu-util.

Personal tools

Openmoko regularly releases updated versions of the Openmoko root filesystem, the kernel, and the U-Boot as binary images. These may be programmed into the Flash memory (NAND) of Neo FreeRunner. For that, you can use the USB cable and another computer which will run an Openmoko provided tool to flash the Neo FreeRunner "through" USB.

Overview

All the components of the software in the FreeRunner are bundled together into binary images.

On a desktop computer when you want to replace the operating system (OS), you would boot it from a CD-ROM drive, then copy OS files from the CD to the internal hard drive. The FreeRunner does not have a CD-ROM drive and files must typically be re-written/flashed directly into internal storage (NAND flash). It is also possible to load all the OS files to and boot from a microSD.

The FreeRunner has two kinds of internal program storage: NOR flash and NAND flash. The NOR flash is small and stores only a special boot program used when you need to re-write the contents of the NAND flash. NAND flash acts more like a hard drive.

The NAND Flash is divided into 3 partitions for the bootloader, kernel, and root filesystem - so each of these components can be flashed separately. For example if you are trying to install a modified kernel, you only have to follow the steps to flash the kernel image.

  • bootloader: a small program that runs first and starts everything else when the FreeRunner is powered on or reset (depending on how you reset it, the version from NOR or NAND is booted).
  • kernel: the central component in the Linux operating system.
  • root filesystem: contains all the files that make up the commands and applications that you can run.

Before you start: Erasing the root filesystem or flashing the uboot are radical measures. Take the time to ponder the necessity. Sometimes problems can be fixed by updating only the kernel.

Alternative : running from microSD card

You may install this distribution on the microSD card, in order to boot from microSD card. That allows you to keep another distribution installed in NAND (for instance to test 2008.08 while still having 2007.2 for default boot).

Collect the things you need

Download the DFU-util program

You will download that program on your desktop computer. It will allow you to connect to the FreeRunner through the USB cable and control its bootloader. That connection uses a special protocol which addresses the bootloader's interface, and differs from USB networking. There is a separate page to describe it in more detail: dfu-util.

Note: dfu-util seems to consistently fail with a "-62" error on 64-bit Linux. If you have access to a 32-bit machine, use it instead!

MacOS X: MacOS_X#Graphical_Flashing_with_Openmoko_Flasher

Linux: http://buildhost.openmoko.org/releases/Freerunner/dfu-util

Make sure it is executable by setting the permissions with this command: chmod a+x dfu-util

Windows: http://projects.openmoko.org/frs/?group_id=166&release_id=162

See additional driver installation instructions for Windows at Dfu-util-windows

Download the image files that you will need

Exactly what files you need depends on what you are trying to install. In most cases you will need to install a Kernel (uImage) and a Root Filesystem (rootfs). In rare cases, when there is a bug you need fixed, you will also install a new bootloader.

Please read Distributions for choosing the distribution which fits your needs, and then see Download for downloading.

Boot the FreeRunner from NOR Flash

Booting from NOR Flash
  1. Read the other sections of this page first, because you will have 30 seconds to enter the flashing commands, come back here when ready.
  2. Do not connect the USB cable from the PC to your Neo FreeRunner yet (disconnect it).
  3. Boot your Neo Freerunner into the NOR uBoot menu for flashing.
    1. Press and hold AUX button
    2. Press the Power button until the boot menu comes up
    3. This menu is labelled *** BOOT MENU (NOR) ***
    4. See also Booting the Neo FreeRunner
  4. Stay in NOR uBoot menu, do not to select or enter any item in menu. Now you will be able to flash, make backups of your Freerunner or query the Freerunner with dfu-util.
  5. The FreeRunner only stays at the NOR boot prompt for about 30 seconds and then shuts off unless you do something.
  6. Connect your Neo to the GNU/Linux or Windows host via a USB cable.
  7. Now you can enter the dfu-util commands on your PC as described below.
  8. If the Neo FreeRunner turns off before you press start flashing (screen goes black), go back to step 2. If you start flashing in time, the phone will not turn off meanwhile.


Note that the dfu-util connection does not use Ethernet over USB - that is, you should not attempt to set up a usb0 network interface on your GNU/Linux host desktop (on Windows, you need a DFU class driver, or you can use the LibUSB-Win32 driver described on the Dfu-util-windows page). The dfu-util utility sets up its own connection to the FreeRunner. In fact, you will not be able to make an Ethernet-over-USB connection to the FreeRunner when it is at the uBoot menu; this type of connection is only available when the FreeRunner has booted fully.

After connecting the FreeRunner to your host via USB cable, you can test whether dfu-util "sees" the FreeRunner by executing:

  dfu-util -l

If you get error messages from the dfu-util command then try again. Often it works on the second try.

Do a backup

If you have a working image that you're happy with but want to try something different, you should probably do a Pre-Flash Backup.

Using dfu-util

dfu-util can be used to read flash memory, write memory, and get information from the device.

This is the general command format to write an image file to a (predefined) "partition name" (referred to as altsetting in dfu-util help/manual) :

dfu-util -a altsetting -R -D file_name

where:
-a altsetting : Specify the altsetting of the DFU interface by name or by number
-R  : Issue USB Reset signalling once we're finished
-D file_name : Write firmware from file_name into device

On Linux, you run dfu-util from a command shell prompt. If you have not put it somewhere on your command path you probably need to prefix it with a "./" like this ./dfu-util. On some systems you need to be root before this will work and on Ubuntu you must preface the command with "sudo" or you will get the following error: "Cannot claim interface: could not claim interface 2: Operation not permitted"

On Windows, you need to open a command window and run from a command line. Use Start-Run Program and type "cmd" to open a Window.

More detailed manual for gfu-util is available here : Dfu-util

Flashing the Kernel

The command format is

dfu-util -a kernel -R -D /path/to/uImage

When flashing succeeds the following will be shown:

status(0) = No error condition is present
Done!

Flashing may fail with an error -110. This indicates that the kernel is too big for the default kernel partition. uboot can be used to change the size of the default partitions on the device

Flashing the Root Filesystem

The root filesystem has to be an image in jffs2 format. If the file you downloaded is zipped or compressed (has a .gz or .zip extension) you have to uncompress it first.

The command format is

dfu-util -a rootfs -R -D rootfs_filename.jffs2

where rootfs_filename.jffs2 is the name of the file containing the root filesystem.

When flashing succeeds the following will be shown:

status(0) = No error condition is present
Done!

Flashing the boot loader to the NAND

The boot loader (U-boot) file should have a .bin extension. As with the root filesystem, if the file you downloaded is zipped or compressed (has a .gz or .zip extension) you have to uncompress it first.

The command format is

dfu-util -a u-boot -R -D uboot.bin

where uboot.bin is the name of the boot loader binary image file.

Reminder: You should have boot from NOR first, in order to flash the boot-loader in NAND. After flashing succesfully, make sure you reboot from NAND's newly flashed boot loader, to benefit from the updates.

(Optional) After an upgrade, you may wish to check that the u-boot version matches the one you have just flashed. You can use 'grep Bootloader /dev/mtdblock1' from a shell on the FreeRunner (and possibly the 1973 as well) to get the NAND u-boot version, like this:

  root@om-gta02:~# grep Bootloader /dev/mtdblock1
  Neo1973 Bootloader U-Boot 1.3.2+gitr18+64eb10cab8055084ae25ea4e73b66dd03cc1a0cb

You can grep for the same string in /dev/mtdblock0 to retrieve the NOR u-boot version:

  root@om-gta02:~# grep  Bootloader /dev/mtdblock0
  Neo1973 Bootloader U-Boot 1.3.2-moko12


Reboot the FreeRunner from NAND

You should now be able to boot into the new images.

Pay attention to booting from the NAND flash this time, in particular if you upgraded the boot-loader (in short: 1. press and hold power button down, and then 2. press aux button)

The boot menu should be labelled *** BOOT MENU (NAND) *** this time (see booting from NAND for more detailed instructions).