Booting the Neo FreeRunner/es
From Openmoko
Languages: |
English • العربية • Български • Česky • Dansk • Deutsch • Esperanto • Eesti • Español • فارسی • Suomi • Français • עברית • Magyar • Italiano • 한국어 • Nederlands • Norsk (bokmål) • Polski • Português • Română • Русский • Svenska • Slovenčina • Українська • 中文(中国大陆) • 中文(台灣) • Euskara • Català |
|
El Neo FreeRunner tiene dos memorias FLASH: NOR FLASH y NAND FLASH. Un 'boot loader' está presente en ambas memorias.
El proceso normal de encendido utiliza el boot loader ubicado en la NAND FLASH. La memoria NAND FLASH puede ser actualizada (escrita) usando el boot loader y una utilidad (dfu_util) la cual corre en el PC anfitrión.
La memoria NOR FLASH NO puede ser escrita usando el boot loader. La razón para esto es proveer un boot loader a prueba de fallos en la memoria NOR FLASH en caso que el boot loader de la NAND FLASH quede corrupto después de actualizarse
Las siguientes son las formas de bootear (iniciar) tu Neo FreeRunner:
- Puedes arrancarlo desde una imagen de Openmoko directamente (opción por defecto, cuando se enciende la primera vez).
- Puedes arrancarlo desde U-Boot bootloader ubicado en la NAND Flash.
Arrancar el sistema
Booting the device into NAND and NOR Flash allows you to update the kernel and root filesystem.
Start the Openmoko Image
Press and hold Power button for about 8 seconds, until the Openmoko splash screen turns up. You may now release the Power button and the Neo FreeRunner will continue to boot into the Openmoko Image. The boot time to the "Today" page is about 2 minutes. Improvements are being discussed in the Booting time reduction plan. |
Log into U-Boot in the NAND Flash
|
Log into U-Boot in the NOR Flash
This option is usually used by developers or when flashing (imaging) the FreeRunner.
Flashing can be performed when the NOR boot menu is active. There are six options you can choose when you log into the NOR Flash.
If you cannot log into U-Boot in NAND flash then you can log into U-Boot in the NOR flash instead. When flashing the device via USB connection, you must choose Set console to USB by pressing the AUX key until it is highlighted and then press the power button to select it.
|