Analog wired Headset

From Openmoko

Revision as of 03:28, 7 September 2008 by Amd77 (Talk | contribs)

Jump to: navigation, search

There's a four-ring 2.5mm stereo jack which provides connectivity to old-fashioned wired headsets.

The headsets used by Motorola smartphones (A780,A1200, ...) and the V-360 have a compatible configuration.

The headsets used by some Nokia phones (N95, ...) have the same jack but they are incompatible. For technical information about rewiring them visit Analog wired Headset Nokia

Neo FreeRunner

ring
1(base): GND
2: left out
3: right out
4(tip): mic + HOLD-button(press:short to GND)

Neo 1973

Pinout: [1]

base = ground 
speaker left  (internal impedance 33R) to ground. (+jackinsert detection)
speaker right (internal impedance 33R) to ground.
tip = mic electret condenser type, to ground. 
      bias (power for mic) 2K2 from +3.3v(wolfson codec) 
      (+HoldButton shortcircuit to ground)

Software support

Dylan proposed a proof of concept scripts to fix something about the headset insertion/removal being incorrectly acted upon.

Personal tools

There's a four-ring 2.5mm stereo jack which provides connectivity to old-fashioned wired headsets.

The headsets used by Motorola smartphones (A780,A1200, ...) and the V-360 have a compatible configuration.

The headsets used by some Nokia phones (N95, ...) have the same jack but they are incompatible. For technical information about rewiring them visit Analog wired Headset Nokia

Neo FreeRunner

ring
1(base): GND
2: left out
3: right out
4(tip): mic + HOLD-button(press:short to GND)

Neo 1973

Pinout: [1]

base = ground 
speaker left  (internal impedance 33R) to ground. (+jackinsert detection)
speaker right (internal impedance 33R) to ground.
tip = mic electret condenser type, to ground. 
      bias (power for mic) 2K2 from +3.3v(wolfson codec) 
      (+HoldButton shortcircuit to ground)

Software support

Dylan proposed a proof of concept scripts to fix something about the headset insertion/removal being incorrectly acted upon.