Amontec JTAGkey

From Openmoko

(Difference between revisions)
Jump to: navigation, search
(some info on the jtagkey and jtagkey tiny)
 
Line 1: Line 1:
−
The Amontec JTAGkey is a USB to JTAG adaptor sold by the swiss company Amontec (http://www.amontec.com/).  They also offer a very inexpensive variant called JTAGkey Tiny, which is more or less the same hardware, but without level shifters. This menas that low-voltage signals might not be picked up.  
+
The Amontec JTAGkey is a USB to JTAG adaptor sold by the [http://www.amontec.com/ Swiss company, Amontec].  [http://www.amontec.com/ Amontec] also offer a very inexpensive variant called JTAGkey Tiny, which is more or less the same hardware, but without level shifters. This menas that low-voltage signals might not be picked up.  
  
−
However, on the [[Neo1973 Hardware]], the JTAG voltage is 3.3Volts, so no level shifter is required, and the JTAGkey Tiny can be used.
+
However, on the [[:Category:Neo1973 Hardware | Neo1973 Hardware]], the JTAG voltage is 3.3Volts, so no level shifter is required, and the JTAGkey Tiny can be used.
  
−
Please note that since we now have our official [[Debug Board]] we obviously encourage using this
+
Please note that encourage using the new official [[Debug Board]] over other JTAG boards.
 +
 
 +
[[Category:Neo1973 Hardware]]

Revision as of 21:58, 6 April 2007

The Amontec JTAGkey is a USB to JTAG adaptor sold by the Swiss company, Amontec. Amontec also offer a very inexpensive variant called JTAGkey Tiny, which is more or less the same hardware, but without level shifters. This menas that low-voltage signals might not be picked up.

However, on the Neo1973 Hardware, the JTAG voltage is 3.3Volts, so no level shifter is required, and the JTAGkey Tiny can be used.

Please note that encourage using the new official Debug Board over other JTAG boards.

Retrieved from "http://openmoko.org/index.php?title=Amontec_JTAGkey&oldid=7294"
Personal tools

The Amontec JTAGkey is a USB to JTAG adaptor sold by the Swiss company, Amontec. Amontec also offer a very inexpensive variant called JTAGkey Tiny, which is more or less the same hardware, but without level shifters. This menas that low-voltage signals might not be picked up.

However, on the Neo1973 Hardware, the JTAG voltage is 3.3Volts, so no level shifter is required, and the JTAGkey Tiny can be used.

Please note that encourage using the new official Debug Board over other JTAG boards.