Disassembling the Neo1973
|
NOTE: This page was written as of GTA01Bv3 hardware revision and might need updating soon
|
Back side of Neo1973
Opening back cover
|
NOTE: You now need to remove the two Torx screws (T6x40)
|
Carefully remove top cover
Top case lid removed
Lifting the PCB on the left side
|
NOTE: You have to bend the plastic case a bit outwards until the headphone jack on the left side of the device becomes loose
|
Removing PCB from case
|
NOTE: Since the PCB now is loose on one side, you can carefully pull the USB socket and GPS antenna connector out of the right side of the case, and then flip the PCB upwards
|