Neo 1973 OpenOCD
From Openmoko
OpenOCD is a 100% free software On-chip-debugger for commonly-found ARM JTAG probes such as wiggler, chamaeleon, jtag-key and others.
It provides a human-readable telnet interface for manually halting/resuming the target device, reading/writing registers and memory, etc.
In addition, it provides a RDI (remote debugger interface) on a TCP port. This interface can be used by gdb (the GNU Debugger).
The GTA01 development team uses OpenOCD with a wiggler compatible probe as their ICE solution.
Contents |
Getting OpenOCD
OpenOCD Revision 82 has been proven to work with our QT2410 target board and wiggler. You can check rev. 82 out of the OpenOCD subversion via
svn co -r 82 http://svn.berlios.de/svnroot/repos/openocd/trunk
Configuration
User:HaraldWelte has provided a openocd.cfg configuration file for use of OpenOCD with wiggler and the QT2410 target board.
Usage
Ju
Known Bugs
- CP15 register read/write of ARM920T core not working
This has been reported upstream. Bugfix pending.