Manually using GSM
From Openmoko
When men were real men and typed their own AT commands...
Thankfully, this may now be partially obsolete. The dialer now works!
This is a short guide how to manually get GSM going.
Contents |
Requirements
- GTA01Bv2 or GTA01Bv3 with very recent u-boot bootloader, providing usbtty (serial over USB) support)
- Do not connect any debug board!
Walk-Through
Booting the system
- Make sure the rootfs you use has 'auto usb0' in /etc/network/interfaces
- Configure the host's usb0 interface to 192.168.0.200 netmask 255.255.255.0
- ssh to root@192.168.0.201
Disabling the getty
Our default images all have a getty running on /dev/ttySAC0, please edit /etc/inittab and disable the getty on that port
Reducing the loglevel
{{note|You don't need this in kernel builds with patchset