Disassembling Neo 1973
From Openmoko
Revision as of 23:19, 1 February 2007 by HaraldWelte (Talk | contribs)
Disassembling the Neo1973
NOTE: This page was written as of GTA01Bv3 hardware revision and might need updating soon |
Contents |
Back side of Neo1973
Opening back cover
NOTE: You now need to remove the two Torx screws (T6x40) |
Carefully remove top cover
Top case lid removed
Lifting the PCB on the left side
NOTE: You have to bend the plastic case a bit outwards until the headphone jack on the left side of the device becomes loose |
Removing PCB from case frame
NOTE: Since the PCB now is loose on one side, you can carefully pull the USB socket and GPS antenna connector out of the right side of the case, and then flip the PCB upwards |
Empty case frame
You can actually see the two stereo speakers beneath the translucent cover, and next to it the small vibrator motor.