NeoCon
From Openmoko
(Difference between revisions)
Line 3: | Line 3: | ||
'''neocon''' has a few graving advantages over some other terminal apps: | '''neocon''' has a few graving advantages over some other terminal apps: | ||
− | * You don't have to be root to access /dev/ttyACM0 with '''neocon'''. Beeing member of ''dialout'' should give you sufficient privileges. | + | * You don't have to be ''root'' to access /dev/ttyACM0 with '''neocon'''. Beeing member of ''dialout'' should give you sufficient privileges. |
− | * '''neocon''' can be started without /dev/ttyACM0 beeing available. It will automatically connect as soon as you start u-boot on the Neo. | + | * '''neocon''' can be started without /dev/ttyACM0 beeing available. It will automatically connect as soon as you start [[Bootloader|u-boot]] on the Neo. |
− | * due to the delay it puts on keyboard input, neocon will allow you to paste commands directly from clipboard without making u-boot choke on it. | + | * due to the delay it puts on keyboard input, neocon will allow you to paste commands directly from clipboard without making [[Bootloader|u-boot]] choke on it. |
− | + | Download the source from http://svn.openmoko.org/developers/werner/neocon/ to a directory of your choice and build '''neocon''' by issuing | |
make | make | ||
− | To connect to the [bootloader|Bootloader] use | + | To connect to the [[bootloader|Bootloader]] use |
./neocon -t 30 /dev/ttyACM0 | ./neocon -t 30 /dev/ttyACM0 |
Revision as of 00:16, 28 February 2008
neocon is a handy terminal application (not only) for u-boot.
neocon has a few graving advantages over some other terminal apps:
- You don't have to be root to access /dev/ttyACM0 with neocon. Beeing member of dialout should give you sufficient privileges.
- neocon can be started without /dev/ttyACM0 beeing available. It will automatically connect as soon as you start u-boot on the Neo.
- due to the delay it puts on keyboard input, neocon will allow you to paste commands directly from clipboard without making u-boot choke on it.
Download the source from http://svn.openmoko.org/developers/werner/neocon/ to a directory of your choice and build neocon by issuing
make
To connect to the Bootloader use
./neocon -t 30 /dev/ttyACM0
To getrid of neocon, just issue a
killall neocon