User:Henrikz
From Openmoko
m |
(nothing extra needed) |
||
(8 intermediate revisions by one user not shown) | |||
Line 4: | Line 4: | ||
* implementing some rendering stuff (for some unknown reason/purpose) | * implementing some rendering stuff (for some unknown reason/purpose) | ||
* using gpgp and/or implementing encryption/key-signing for e.g. sms | * using gpgp and/or implementing encryption/key-signing for e.g. sms | ||
+ | |||
+ | Can be contacted by email | ||
+ | h e n r i k @ z i m m e r . t o | ||
+ | |||
+ | See my [http://www.henrikzimmer.com/om FreeRunner-Experience-Blog-a-la-Amateur] (btw. in German) | ||
+ | |||
+ | === Usb Power === | ||
+ | To be able to have a keyboard (i.e. FR acting as a USB host) connected to the FreeRunner and charging the FreeRunner (FR acting as a device) at the same time I modified my USB Hub | ||
+ | * Brand: Equip | ||
+ | * Type: 4 Port USB2.0 aluminum | ||
+ | to also supply power to the upstream port of the hub. | ||
+ | |||
+ | Supposedly this is done by shorting a certain diode in the hub, which enables current to reach the upstream port ([[USB_host]]). | ||
+ | Since I was unable to locate any diode on my hub I decided to do as mentioned here [http://chockerblockablog.blogspot.com/2008/03/neo1973-no-wifi3gbattery-life-no.html Chockerblockablog], that is | ||
+ | to simply connect the +5V (pin 1) from one of the downstream ports to pin 1 of the upstream port (connected to the FreeRunner). | ||
+ | [For all the hubs I've bought here in Taiwan, plugging an external power supply into their coaxial port also supplies 5V to the Mini 5 pin socket, as well of course to the 4 USB A sockets. [[User:Jidanni|Jidanni]] 02:13, 26 November 2008 (UTC)] | ||
+ | Also the FreeRunner needs to be told to 1. Be a host, 2. to charge (faster than 100mA default). | ||
+ | These are the steps (as I did them, no warranty...) | ||
+ | * Modify USB Hub by bypassing diode with a jumper OR connect pin 1 (+5V) from downstream port to pin 1 of the upstream port | ||
+ | * Tell FR to act as a USB Host | ||
+ | echo "host" > /sys/devices/platform/s3c2410-ohci/usb_mode | ||
+ | * Tell FR to enable charging | ||
+ | echo "0" > /sys/devices/platform/neo1973-pm-host.0/hostmode | ||
+ | * The FR is now charging with 100mA | ||
+ | cat /sys/class/i2c-adapter/i2c-0/0-0073/usb_curlim | ||
+ | outputs "100mA" | ||
+ | * Set charging to 500mA (or more... I wouldn't) [[Forcing_fast_charge_mode]] | ||
+ | echo 500 > /sys/class/i2c-adapter/i2c-0/0-0073/force_usb_limit_dangerous | ||
+ | * DONE! Now the FR is charging with | ||
+ | cat /sys/class/i2c-adapter/i2c-0/0-0073/usb_curlim | ||
+ | "500mA" and now a Usb keyboard, mouse etc. can be used while charging! | ||
+ | |||
+ | ''NOTE: to actually attach the Usb Hub to the FreeRunner, I used a USB gender changer (here are some (other) suggestions [[Specialized_USB_cables]]))'' | ||
+ | |||
+ | ''NOTE2: Another (solder-less) option is described here [http://tabletblog.com/2006/01/no-solder-usb-host-method.html no-solder-usb-host-method (for a N770, but who cares)]'' | ||
+ | |||
+ | ''NOTE3: Also, wikipedia is your [http://en.wikipedia.org/wiki/Universal_Serial_Bus USB-friend ]'' |
Latest revision as of 04:13, 26 November 2008
Living in:
- Germany
Interested in:
- implementing some rendering stuff (for some unknown reason/purpose)
- using gpgp and/or implementing encryption/key-signing for e.g. sms
Can be contacted by email h e n r i k @ z i m m e r . t o
See my FreeRunner-Experience-Blog-a-la-Amateur (btw. in German)
[edit] Usb Power
To be able to have a keyboard (i.e. FR acting as a USB host) connected to the FreeRunner and charging the FreeRunner (FR acting as a device) at the same time I modified my USB Hub
- Brand: Equip
- Type: 4 Port USB2.0 aluminum
to also supply power to the upstream port of the hub.
Supposedly this is done by shorting a certain diode in the hub, which enables current to reach the upstream port (USB_host). Since I was unable to locate any diode on my hub I decided to do as mentioned here Chockerblockablog, that is to simply connect the +5V (pin 1) from one of the downstream ports to pin 1 of the upstream port (connected to the FreeRunner). [For all the hubs I've bought here in Taiwan, plugging an external power supply into their coaxial port also supplies 5V to the Mini 5 pin socket, as well of course to the 4 USB A sockets. Jidanni 02:13, 26 November 2008 (UTC)] Also the FreeRunner needs to be told to 1. Be a host, 2. to charge (faster than 100mA default). These are the steps (as I did them, no warranty...)
- Modify USB Hub by bypassing diode with a jumper OR connect pin 1 (+5V) from downstream port to pin 1 of the upstream port
- Tell FR to act as a USB Host
echo "host" > /sys/devices/platform/s3c2410-ohci/usb_mode
- Tell FR to enable charging
echo "0" > /sys/devices/platform/neo1973-pm-host.0/hostmode
- The FR is now charging with 100mA
cat /sys/class/i2c-adapter/i2c-0/0-0073/usb_curlim
outputs "100mA"
- Set charging to 500mA (or more... I wouldn't) Forcing_fast_charge_mode
echo 500 > /sys/class/i2c-adapter/i2c-0/0-0073/force_usb_limit_dangerous
- DONE! Now the FR is charging with
cat /sys/class/i2c-adapter/i2c-0/0-0073/usb_curlim
"500mA" and now a Usb keyboard, mouse etc. can be used while charging!
NOTE: to actually attach the Usb Hub to the FreeRunner, I used a USB gender changer (here are some (other) suggestions Specialized_USB_cables))
NOTE2: Another (solder-less) option is described here no-solder-usb-host-method (for a N770, but who cares)
NOTE3: Also, wikipedia is your USB-friend