View source for USB Product IDs
From Openmoko
You do not have permission to edit this page, for the following reasons:
You can view and copy the source of this page:
Template used on this page:
Return to USB Product IDs.
You do not have permission to edit this page, for the following reasons:
You can view and copy the source of this page:
Template used on this page:
Return to USB Product IDs.
Openmoko is using the USB Vendor and Product IDs below. Note that 0x1457 is the Vendor ID of FIC, Inc, and 0x1d50 is the vendor ID of Openmoko, Inc.
Vendor ID | Product ID | Description |
0x1d50 | 0x1db5 | IDBG in DFU mode |
0x1d50 | 0x1db6 | IDBG in normal mode |
0x1457 / 0x1d50 | 0x5117 | Neo1973/FreeRunner kernel usbnet (g_ether, CDC Ethernet) Mode |
0x1457 / 0x1d50 | 0x5118 | Debug Board (FT2232D) for Neo1973/FreeRunner |
0x1457 / 0x1d50 | 0x5119 | Neo1973/FreeRunner u-boot usbtty CDC ACM Mode |
0x1457 / 0x1d50 | 0x511a | HXD8 u-boot usbtty CDC ACM Mode |
0x1457 / 0x1d50 | 0x511b | SMDK2440 u-boot usbtty CDC ACM mode |
0x1457 / 0x1d50 | 0x511c | SMDK2443 u-boot usbtty CDC ACM mode |
0x1457 / 0x1d50 | 0x511d | QT2410 u-boot usbtty CDC ACM mode |
0x1457 / 0x1d50 | 0x511e | Reserved |
0x1457 / 0x1d50 | 0x511f | Reserved |
0x1457 / 0x1d50 | 0x5120 | Neo1973/FreeRunner u-boot generic serial Mode |
0x1457 / 0x1d50 | 0x5121 | Neo1973/FreeRunner kernel mass storage (g_storage) Mode |
0x1457 / 0x1d50 | 0x5122 | Neo1973/FreeRunner kernel usbnet (g_ether, RNDIS) Mode |
0x1457 / 0x1d50 | 0x5123 | Neo1973/FreeRunner internal USB Bluetooth CSR4 module |
0x1457 / 0x1d50 | 0x5124 | Neo1973/FreeRunner Bluetooth Device ID service |
0x1457 / 0x1d50 | 0x5125 | TBD |
0x1457 / 0x1d50 | 0x5126 | TBD |
0x1d50 | 0x6000 | Ubertooth Zero |
0x1d50 | 0x6001 | Ubertooth Zero DFU |
0x1d50 | 0x6002 | Ubertooth One |
0x1d50 | 0x6003 | Ubertooth One DFU |
0x1d50 | 0x6004 | LeoLipo (Arduino Leonardo clone with LiPo charger) |
0x1d50 | 0x6005 | LED Flower S |
0x1d50 | 0x6006 | LED Cube |
0x1d50 | 0x6007 | LED Flower |
0x1d50 | 0x6008 | Kisbee 802.15.4 transceiver |
0x1d50 | 0x6009 | Adjacent Reality Tracker |
0x1d50 | 0x600a | AVR Programmer |
0x1d50 | 0x600b | Hypna Go Go |
0x1d50 | 0x600c | CatNip LPC1343 development board |
0x1d50 | 0x600d | Enhanced RoboBrrd Brain Board |
0x1d50 | 0x600e | OpenRISC Ordb2a-ep4ce22 development board |
0x1d50 | 0x600f | Paparazzi Lisa/M |
0x1d50 | 0x6010 | Openpipe flute/bagpipe MIDI controller |
0x1d50 | 0x6011 | LeoLipo (DFU) |
0x1d50 | 0x6012 | Universal C64 Cartridge |
0x1d50 | 0x6013 | DiscFerret magnetic disc analyser (Bootloader) |
0x1d50 | 0x6014 | DiscFerret magnetic disc analyser (Active/run) |
The above mentioned IDs have been submitted for inclusion into the http://www.linux-usb.org/usb.ids list
As the openmoko products have been discontinued, Openmoko Inc. is opening up the use of its Vendor ID for use by the Free and Open Source software and hardware communities. This means you can simply register your devices and will get an allocation of a Product ID for free.
By applying for an Openmoko Product ID, you acknowledge that either
In order to request a product ID, please send an e-mail to usb-id@openmoko.org including
Languages: |
English • العربية • Български • Česky • Dansk • Deutsch • Esperanto • Eesti • Español • فارسی • Suomi • Français • עברית • Magyar • Italiano • 한국어 • Nederlands • Norsk (bokmål) • Polski • Português • Română • Русский • Svenska • Slovenčina • Українська • 中文(中国大陆) • 中文(台灣) • Euskara • Català |