View source for Flashing the Neo FreeRunner
From Openmoko
You do not have permission to edit this page, for the following reasons:
You can view and copy the source of this page:
Template used on this page:
Return to Flashing the Neo FreeRunner.
You do not have permission to edit this page, for the following reasons:
You can view and copy the source of this page:
Template used on this page:
Return to Flashing the Neo FreeRunner.
![]() |
Languages: |
English • العربية • Български • Česky • Dansk • Deutsch • Esperanto • Eesti • Español • فارسی • Suomi • Français • עברית • Magyar • Italiano • 한국어 • Nederlands • Norsk (bokmål) • Polski • Português • Română • Русский • Svenska • Slovenčina • Українська • 中文(中国大陆) • 中文(台灣) • Euskara • Català |
Most of the software on the Neo FreeRunner can be updated or changed. The root filesystem, the kernel, and the Bootloader can be modified with the program dfu-util from a computer. This page does not describe flashing the NOR Flash which requires a debug board. See Flashing NOR for this procedure.
The NAND Flash is divided into 3 partitions for the bootloader, kernel, and root filesystem. Each component can be flashed separately.
The bootloader is a small program that runs first and starts everything else when the FreeRunner is powered on. The bootloader is independent of the distribution you use. The kernel and the root filesystem are provided by the distribution.
Before you start: Erasing the root filesystem or flashing the bootloader are radical measures. Take the time to ponder the necessity. Sometimes problems can be fixed by only updating the kernel.
Command-line. DFU-util, the tool to flash the FreeRunner has to be installed on your computer. It is available for Linux, MacOS X, and Windows (see links below). DFU-util allows you to connect to the FreeRunner through the USB cable and control its bootloader. That connection uses a special protocol which addresses the bootloader's interface, and differs from USB networking. For more details, see the separate dfu-util page.
GUI. Instead of the command-line-based DFU-util, you can use NeoTool, a graphical tool for flashing the FreeRunner: see the NeoTool page.
Linux: http://downloads.openmoko.org/distro/releases/Om2008.9/dfu-util
Make sure it is executable by setting the permissions with this command: chmod a+x dfu-util
Linux 64-bit: You need 64-bit version of dfu-util, which usually can be found in your distribution repository. If your distribution does not provide 64-bit dfu-util, or it consistently fails with a "-62" error, you have two ways to go:
MacOS X: MacOS_X#Graphical_Flashing_with_Openmoko_Flasher
Windows: http://projects.openmoko.org/frs/?group_id=166&release_id=162
See additional driver installation instructions for Windows at Dfu-util-windows
Virtual machines While there has been some limited success reported using dfu-util from within a Virtual Machine (such as VMware), in general it is not possible to use dfu-util in this fashion. You must use dfu-util on an operating system that has direct access to the physical USB device hardware.
There are separate image files for all 3 software components. In most cases you will need to install a Kernel (uImage) and a Root Filesystem (rootfs). In rare cases, when there is a bug you need fixed, you will also install a new bootloader.
Please read Distributions for choosing the distribution which fits your needs, and then see Download for downloading.
If you have a working image that you're happy with but want to try something different, you should probably do a Backup.
See Manuals/Dfu-util
(Optional) After an upgrade, you may wish to check that the u-boot version matches the one you have just flashed. You can use 'grep Bootloader /dev/mtdblock1' from a shell on the FreeRunner (and possibly the 1973 as well) to get the NAND u-boot version, like this:
root@om-gta02:~# grep Bootloader /dev/mtdblock1 Neo1973 Bootloader U-Boot 1.3.2+gitr18+64eb10cab8055084ae25ea4e73b66dd03cc1a0cb
You can grep for the same string in /dev/mtdblock0 to retrieve the NOR u-boot version:
root@om-gta02:~# grep Bootloader /dev/mtdblock0 Neo1973 Bootloader U-Boot 1.3.2-moko12
DFUScript developed to assist users who have multiple devices in using dfu-util via the command line. Information on where to download and use DFUScript can be found on DFUScript
This approach involves writing the rootfs into nand directly on the phone from a system already running on it, not necessarily via usb from a computer.
If you have a system running from a different partition that you intend to flash (for example sd card), you can use nandwrite to do the work, which is much faster (it takes about 30s to write a 59MB jffs2 image).
Make sure you have nandwrite installed (on gentoo, it's in sys-fs/mtd-utils package)
Also make sure that the host system has received correct partition list, for example for my stock Neo Freerunner partition list:
#cat /proc/mtd dev: size erasesize name mtd0: 00200000 00010000 "physmap-flash.0" mtd1: 00040000 00020000 "u-boot" mtd2: 00040000 00020000 "u-boot_env" mtd3: 00800000 00020000 "kernel" mtd4: 000a0000 00020000 "splash" mtd5: 00040000 00020000 "factory" mtd6: 0f6a0000 00020000 "rootfs"
In this case, we're looking for rootfs which according to above is mtd6. If you have it somewhere else, substitute mtd6 with whatever you have in the remainder of this section.
Beware of flashing the u-boot partition, probably you'll have to recreate mtdparts configuration for u-boot from u-boot console. Probably this is due to some kind of bug in nandwrite.
dynpart dynenv set u-boot_env
You can test your nand for bad blocks by issuing nandtest /dev/mtd6 (this is a data destructive test !)
First, put your .jffs2 file somewhere the phone system can read it
Second, write the desired image into the nand this way:
flash_eraseall /dev/mtd6 nandwrite -p /dev/mtd6 /path/to/image.jffs2
You're all done!
Okay, so you just reflashed. The splash screen pops up, but uBoot fail to load the kernel, and return to boot menu. WTF?