View source for Manuals/Neo FreeRunner/eu
From Openmoko
You do not have permission to edit this page, for the following reasons:
You can view and copy the source of this page:
Templates used on this page:
Return to Manuals/Neo FreeRunner/eu.
You do not have permission to edit this page, for the following reasons:
You can view and copy the source of this page:
Templates used on this page:
Return to Manuals/Neo FreeRunner/eu.
Languages: |
English • العربية • Български • Česky • Dansk • Deutsch • Esperanto • Eesti • Español • فارسی • Suomi • Français • עברית • Magyar • Italiano • 한국어 • Nederlands • Norsk (bokmål) • Polski • Português • Română • Русский • Svenska • Slovenčina • Українська • 中文(中国大陆) • 中文(台灣) • Euskara • Català |
Mila esker Neo FreeRunner erosteagatik. Neo FreeRunner telefonoa Openmokorako pentsatutako bigarren hardware plataforma da. Gida honetan hasierako erabilerarako behar duzuna eta tresna berria ezagutzen ikasiko duzu.
Tips |
---|
Bideotxoa ere ikus dezakezu. Neo gailuaren bertsio zaharrarekin egina den arren, antzeko prozesua da. |
Lehendabiziko erabileraren aurretik Bateria guztiz kargatu behar da. Bateria kargatzeko 1000mA-ko kargatzailea edota 500mA-ko karga eman dezakeen USB portu bat erabil daitezke. Gaur egungo konputagailuek ez daukate inolako arazorik NEO Freerunnera kargatzeko USB portuak erabiliz. Itzalita baldin badago, ez da kargatuko, beraz, piztu eta interfaze grafikoa (GUI edo Graphical User Interface) agertu arte piztu dadila. USB kablea sartzen duzunean (USB kableak konputagailuari konektatuta egon behar du edota 1000mA-ko kargagailuari, alegia, argi indarra eduki behar du) automatikoki piztuko da. Ez bada bere kabuz pizten, eskuz piztu dezakezu, horretarako, pizteko botoia sakatu (bost edo sei segundo sakatuta eduki). Botoi hau USB entxufearen azpian dago.
Nahiz eta kargagailuak 2A-ko indarra emateko gaitasuna eduki, Neo Freerunnerraren karga-abiadura 1A-koa da, eta beraz, kargatze-abiadura kargagailuaren gaitasuna baino txikiagoa da.
Entxufeak hiru mota onartzen ditu: berez Ipar Ameriketako entxufea da, baina estalkia kendu eta Europako edota Erresuma Batuko entxufeetarako egokigailua jar daitezke entxufean. Horretarako, entxufearen estalkiaren kisketa sakatu eta estalkia kanporantz labaindu behar da. Kisketa entxufearen estalkiaren testua dagoen kontrako aldean dago. Kontuan izan Ipar Amerikako entxufearen bi konektoreak ez direla askatuko, horien gainetik sartu behar da egokigailua. Egokigailua ere antzera kentzen da.
Bateria kargatzeko denbora sarrerako indarraren araberakoa da, 100mA-ko indarraz 12~15 ordu behar dira (gailua eteteko egoeran dagoenean indar horrekin kargatzen da) *), sarrerako indarra 500mA-koa bada (PC-en USB konexioa) 2~3 ordu behar dira, eta 1000mA-ko indarrez (kargatzailea) 1.5~3 ordu behar dira. (90%~100%)
*) Gailuak 100 mA baino gehiago behar ditu lanean ari denean, beraz, USB bidezko indarra 100mAkoa baldin bada, eteteko egoeran ez badago, gailua ez da kargatuko.
NOTE: ikusi Neo FreeRunner Hardware arazoak bateria guztiz husten ez lagatzeari buruz. |
Pizteko botoia
Ikututxoa edo kolpetxoa emanaz GTA02 gailua etete-egoeran jarriko da. Sakatuta edukiz gero gailua itzali egingo da. |
Aux botoia
Ikututxo bidez edo sakatuz pantaila blokeatuko da. |
Aurikularren Jack-a
Aurikularren jack-a 2.5mm dituen konektorea da, eta 4 kontaktu dauzka: stereo + MIC. Motorola smartphone (A780,A1200, ...) eta V-360 gailuek erabiltzen dutenarekin bateragarria da.
Informazio gehiago aurikularren orrian.
Zure gailua zer nolakoa den jakitea komeni zaizu, hau da, gailuaren aldaera (revision) zein den zehaztea komeni da.
Bi hauek garrantzitsuak dira, zure gailuan, fabrikan, zein irudi flasheatu (ezarri) duten jakiten lagunduko baitizute. (c.f. banaketak eta Neo FreeRunner (aka GTA02) aldaerak).
Freerunnerrean dagoen software ia guztia aldatu edo eguneratu daiteke, bai eta gailua pizteko beharrezkoa den abiarazlea eta GSM txipean dagoen softwarea ere.
Izatez, Neo FreeRunnerra berezko banaketa bat barnean ezarrita duela iritsiko zaizu, beraz, hemendik aurrerakorik egin beharrik ez duzu izango. Irakurri OM 2008 eskuliburua zure telefonoa erabiltzen hasteko. Gerora, zure gailuan banaketa berriagoa edota erabilera zabalagoa duena edota aukera bereziak eskaintzen dituena instalatu nahi zenezake, kasu horretan irakurri ondokoa.
The bootloader is needed to start up the operating system on the phone. Qi is the recommended bootloader for the Neo FreeRunner. Installing it will result in faster booting. If you want to have multiple operating systems on your phone you should still stick with U-Boot, which is the older bootloader. You can download a bootloader from http://downloads.openmoko.org/distro/testing/NeoFreerunner/ and install it using the program NeoTool on your Linux PC. (See http://wiki.openmoko.org/wiki/No_Linux if you do not have Linux on your PC)
The current version of the GSM Firmware is called Moko 11. If you do not have this version installed yet you should do an upgrade, which will fix several issues related to the phone functionality of the FreeRunner.
This works by starting the FreeRunner from a system installed on the uSD, which will automatically apply all needed instructions to flash the GSM firmware to the chip. The uSD image will have to be written on a uSD, which will overwrite all its content, so as to make sure it is repartitioned correctly and that it contains the correct bootable system.
The procedure has proven to do a reliable job on flashing MOKO11 to GTA02. Chances anything fails are minimal if you _strictly_ follow the instructions. There's no way to do any harm to your device by using this method.
Take special care though about the destination of `dd`, it has to be the *physical* device (e.g. foo0) of your uSD-card, *not* any partition (e.g. foo0p1). Also make sure there are *no* mounted partitions left on the uSD when starting `dd`!
Triple-check you are not accidentally overwriting your system-HD, by e.g using /dev/sda instead of /dev/sdc! Double-check once more! This is the one-typo-kills-system case ;-) You've been warned.
% sudo dd if=flash-moko11-2.image of=/dev/mmcblk0
# shutdown -h now
If you don't have a uSD reader on your PC, you can dd from the Neo: install task-base-smbfs, u(n)mount /media/card, mount the directory in which you have the flash-moko11-2.image file and do the dd stuff. This will take about 12 minutes.
You can speed this up by re-gziping just the image file and using the following command to decompress it directly to the flash card:
% gzip -d < flash-moko11-2.image.gz > /dev/mmcblk0
Using this gzip method, you can actually do the update with an in place image as long as it is shell enabled and has 92M free on the main file system (all but Android and Neovento right now). Just get the 92M gzip file to the phone, use the above line to extract it to the card after unmounting.
Or, maybe in a more simpler manner:
root@om-gta02 ~ $ umount /media/card and then from desktop: scp flash-moko11-2.image root@192.168.0.202:/dev/mmcblk0
Whether you have Qi installed or not (see above) as your boot loader, you must power up to the NoR menu (Hold AUX Key, press Power button) and select "Boot from microSD (fat/ext2)" to begin the installation process (per DocScrutinizer in #openmoko). Do not let Qi boot the uSD. Although it still seems to flash OK, the green "d_o_n_e" does not show up, to give you the warm feeling that everything is OK.
You can confirm the firmware version number using the mickeyterm (cmd: "AT+CGMR"). In SHR-Settings, Phone/Modem Information will supply the same number.
This section describes how to install a distribution on the internal flash memory of the Neo FreeRunner. If you want to install it on the memory card please refer to the guide provided by the distribution.
For installing a new distribution you will need two files, a root file system (rootfs) image and a kernel image. The root file system image usually ends with ".jffs2", and the kernel image ends with ".uimage.bin". You can get these files from http://wiki.openmoko.org/wiki/Download . Use the program NeoTool to install the distribution on your FreeRunner. The flashing process can take up to 15 minutes for a ~70MB image. It is also wise to make sure that your Neo has enough battery charge prior to flashing.
When flashing succeeds the following will be shown:
status(0) = No error condition is present Done!