View source for Wishlist/Neo1973 P0 Review
From Openmoko
You do not have permission to edit this page, for the following reasons:
You can view and copy the source of this page:
Return to Wishlist/Neo1973 P0 Review.
You do not have permission to edit this page, for the following reasons:
You can view and copy the source of this page:
Return to Wishlist/Neo1973 P0 Review.
This is a page for those with P0 hardware to share their impressions of the device, and to respond to questions that may be raised about it.
See also Neo1973 Phase 0 -- Information for Phase 0 device owners
Neo1973_Hardware#GTA01Bv3 -- Hardware in Phase 0 phone
Found on IRC, pictures by:
Wishlist:
dd bs=1024 count=10240 if=/dev/zero | time gzip -9 > /dev/null 10240+0 records in 10240+0 records out real 0m 4.94s user 0m 3.73s sys 0m 0.58s
time dd if=/dev/urandom bs=1024 count=10240 of=/dev/zero 10240+0 records in 10240+0 records out real 0m 34.95s user 0m 0.01s sys 0m 34.69s and another device: 10240+0 records in 10240+0 records out real 0m 37.01s user 0m 0.03s sys 0m 36.42s
time dd if=/dev/zero bs=1024 count=102400 of=/dev/zero real 0m 2.23s user 0m 0.12s sys 0m 2.08
scp via SSH to the SD card is running with 300kb/s
Bus 1 Device 2: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode) Bus 1 Device 1: ID 0000:0000
Processor : ARM920T rev 0 (v4l) BogoMIPS : 100.96 Hardware : GTA01
All those commands give an error, but see Hardware:AT_Commands for other results.
Wishlist:
By default Neo1973 has usb0 interface working. Under Linux you need to modprobe usbnet and configure usb0 interface:
ifconfig usb 192.168.0.200 netmask 255.255.255.0
Then ssh root@192.168.0.202 with empty password to get into phone.
Dialing currently works only manually.