View source for Getting Started with your Neo FreeRunner
From Openmoko
You do not have permission to edit this page, for the following reasons:
You can view and copy the source of this page:
Return to Getting Started with your Neo FreeRunner.
You do not have permission to edit this page, for the following reasons:
You can view and copy the source of this page:
Return to Getting Started with your Neo FreeRunner.
Languages: |
English • العربية • Български • Česky • Dansk • Deutsch • Esperanto • Eesti • Español • فارسی • Suomi • Français • עברית • Magyar • Italiano • 한국어 • Nederlands • Norsk (bokmål) • Polski • Português • Română • Русский • Svenska • Slovenčina • Українська • 中文(中国大陆) • 中文(台灣) • Euskara • Català |
Thank you for purchasing this Developer release of Neo FreeRunner. This guide will help you know your Neo FreeRunner and explain how to:
There are three ways to boot your Neo FreeRunner. You can power up into an Openmoko Image directly. Alternately, you may also boot into U-Boot via NAND Flash or NOR Flash, which will allow you to update the kernel and root filesystem.
Press and hold Power button until Openmoko splash screen turns up. You may now release the Power button, and Neo FreeRunner will continue to boot into Openmoko Image.
Press and hold Power button, then press and hold AUX button. You can see BOOT MENU for NAND Flash.
You can download the connection tool from : http://svn.openmoko.org/developers/werner/neocon
Connect Neo FreeRunner to Linux host with USB cable and type in the following command in the terminal of a GNU/Linux host.
./neocon /dev/ttyACM0
[Open] In: usbtty Out: usbtty Err: usbtty PCB rev: 0x000 switching led 2 0 switching led 2 1 switching led 2 0 DEVICE_CONFIGURED: 1 GTA02v5#
Press and hold AUX button, then press and hold Power button. Release AUX button. You can see BOOT MENU for NOR Flash.
You can download the connection tool from : http://svn.openmoko.org/developers/werner/neocon
Connect Neo FreeRunner to Linux host with USB cable and type in the following command in the terminal of a GNU/Linux host.
./neocon /dev/ttyACM0
[Open] ##Executing script at 18050100 mtdparts mtdparts=physmap-flash:-(nor);neo1973-nand:0x00040000(u-boot),0x00040000(u-boot_env), 0x00800000(kernel),0x000a0000(splash),0x00040000(factory),0x0f6a0000(rootfs) Ready. DEVICE_CONFIGURED: 1 GTA02v5#
As Openmoko development continues, Openmoko regularly releases updated versions of the Openmoko root filesystem, the kernel, and the U-Boot. These may be programmed into the Flash memory of Neo FreeRunner. You can use the USB cable and Openmoko provided tool to flash Neo FreeRunner.
Neo FreeRunner needs to boot into U-Boot when flashing.
You can download the flashing tool from: http://buildhost.openmoko.org/daily/neo1973/deploy/glibc/images/neo1973/dfu-util
You can download the latest kernel from : http://buildhost.openmoko.org/daily/neo1973/deploy/glibc/images/neo1973/
Type in the following command in the terminal of a GNU/Linux host.
./dfu-util -a kernel -R -D uImage-2.6.24+svnr4082-r4055-r3-neo1973.bin
When flashing succeeds
status(0) = No error condition is present
Done!
You can download the latest root filesystem from : http://buildhost.openmoko.org/daily/neo1973/deploy/glibc/images/neo1973/
Type in the following command in the terminal of a GNU/Linux host.
./dfu-util -a rootfs -R -D openmoko-devel-image-fic-gta02.jffs2
When flashing succeeds
status(0) = No error condition is present
Done!
Connect Neo FreeRunner to Linux host with USB cable. After booting into Openmoko image, there will be a new interface, usb0, in your Linux host.
Type in the following command in the terminal of a GNU/Linux host.
ifconfig usb0 192.168.0.200 netmask 255.255.255.0 ssh root@192.168.0.202
Press Enter to pass the password.
Edit /etc/network/interfaces
auto usb0 iface usb0 inet static address 192.168.0.200 netmask 255.255.255.0
Restart the networking service and type in the following command in the terminal of GNU/Linux host.
ssh root@192.168.0.202
Press Enter to pass the password.
If you don't want to remember the IP number of your phone you can create an alias by adding the following line to your /etc/hosts:
192.168.0.202 openmoko
Now it should immediately be possible to connect your phone using the following command line:
ssh root@openmoko