View source for Gpsd/zh tw
From Openmoko
You do not have permission to edit this page, for the following reasons:
You can view and copy the source of this page:
Template used on this page:
Return to Gpsd/zh tw.
You do not have permission to edit this page, for the following reasons:
You can view and copy the source of this page:
Template used on this page:
Return to Gpsd/zh tw.
GPS (Global Positioning System)是一個衛星定位系統,使用31個衛星。
GPS 類似 "人造衛星" ,以公尺為計算單位。某些形態的GPS,可以較公分為佳的單位進行度量。
利用先進的科技,從IC及其它的元件中接收訊號。
它大量的降低了成本。
因為它大量降低成本的特性,它可以輕鬆的被整合到手機、筆記型電腦及像是耕作用具、瀏覽系統及建築物...等傳統工具中。tion systems and construction equipment.
(你可以在這個位址Global Positioning System Overview取得其它的相關資訊。)
這個分類中可以找到所有GPS的資訊.
PMB 2520 Hammerhead是GPS的one-chip解決方案,它由全球定位公司的Infineon Technologies所製造。它允許支援A-GPS標準的資料存取。 (相關的資料都可以在 PMB 2520 datasheet中找到) short datasheet
Hammerhead包含了以下的模組:
Hammerhead整合了三個系列的介面:
在Hammerhead的UART是一個full-duplex UART 界面。它被固定在8N1(8 data bits, no parity, 1 stop bit)模式。在GTA01中,主要的處理器透過UART連接到這裡。在Neo1973的所有產品當中,它連接到敘列埠。
Hammerhead 驅動程式將會以二進位檔的方法載入,它可以像其它的GPS序列埠般,做為 gpsd的介面,輸入如NMEA 資訊。
gps驅動程式目前已可以使用。(之前,它在取得套件二位元檔授權時,有一些問題 [1])
gpsd程式庫提供下列的資訊,做為高階軟體:
高階軟體傳送下列的訊息到plugin:
Gpsd 利用以下的部份與系統進行溝通:
在GTA01,主要的處理器是S3C2410。
在GTA01上,Hammerhead被設定為透過UART連接到主處理器。UART 的資料輸入/輸出在SC2410上連接到UART 1。UART的硬體流量控制則連接到SC2410的UART 2。
See also Server:A-GPS.
A: Not directly. However, the gpsd program 'gpspipe', with the -r switch will output NMEA data with the current position information. The right way to do it is to use libgpsd in your program if possible.
Languages: |
English • العربية • Български • Česky • Dansk • Deutsch • Esperanto • Eesti • Español • فارسی • Suomi • Français • עברית • Magyar • Italiano • 한국어 • Nederlands • Norsk (bokmål) • Polski • Português • Română • Русский • Svenska • Slovenčina • Українська • 中文(中国大陆) • 中文(台灣) • Euskara • Català |