View source for Prototypes
From Openmoko
You do not have permission to edit this page, for the following reasons:
You can view and copy the source of this page:
Return to Prototypes.
You do not have permission to edit this page, for the following reasons:
You can view and copy the source of this page:
Return to Prototypes.
Prototypes are pieces of hardware such as boards, fully assembled devices, batteries, accessories that OpenMoko uses during the development of new hardware.
This page tracks such prototypes, in which condition their life started, and what happened to them during their lifetime.
Prototypes cannot be purchased. They will be loaned out on a case by case basis, and collected back for post mortem analysis.
If you believe you need a prototype of some upcoming hardware, please mailto:openmoko-kernel@lists.openmoko.org.
current holder: Matt (may be fixed in future)
01 Feb 2008 Miles: verified hardware, same exceptions as #1, Bluetooth sensitivity very bad, GPS broken
31 Jan 2008 Tony: Put inside GTA01 case, speaker, antennas
31 Jan 2008 Batch of 4 from Suzhou, PCBA with all modules, NOR protection disabled, full DM1 (v009) and DM2 (v012)
current holder: Tony (available)
01 Feb 2008 Miles: verified hardware, same exceptions as #1, Bluetooth sensitivity very bad
31 Jan 2008 Tony: Put inside GTA01 case, speaker, antennas
31 Jan 2008 Batch of 4 from Suzhou, PCBA with all modules, NOR protection disabled, full DM1 (v009) and DM2 (v012)
current holder: Tony (available)
01 Feb 2008 Miles: verified hardware, same exceptions as #1, Bluetooth sensitivity very bad
31 Jan 2008 Tony: Put inside GTA01 case, speaker, antennas
31 Jan 2008 Batch of 4 from Suzhou, PCBA with all modules, NOR protection disabled, full DM1 (v009) and DM2 (v012)
current holder: Erin
01 Feb 2008 Miles: verified hardware, same exceptions as #1, Bluetooth sensitivity very bad
31 Jan 2008 Tony: Put inside GTA01 case, speaker, antennas
31 Jan 2008 Batch of 4 from Suzhou, PCBA with all modules, NOR protection disabled, full DM1 (v009) and DM2 (v012)
current holder: Vitaly (Atheros)
01 Feb 2008 Delivered to Vitaly, Atheros
29 Jan 2008 Same as #1 until 29 Jan 2008
current holder: Samuel
31 Jan 2008 Sent to Samuel
29 Jan 2008 Same as #1 until 29 Jan 2008
current holder: Matt (fixing shutdown bug)
31 Jan 2008 Running from battery shuts down 5 seconds after reboot. Running from power source (plugged into battery connectors) is stable
29 Jan 2008 Same as #1 until 29 Jan 2008
current holder: Sean Chiang
29 Jan 2008 Same as #1 until 29 Jan 2008
current holder: Tony (may be fixed in future)
29 Jan 2008 Miles: Bluetooth scan doesn't work, Power Key broken
29 Jan 2008 Same as #1 until 29 Jan 2008
current holder: Tony (end of life)
21 Jan 2008 Allen: Added Bluetooth module, reworked for power measurements, broken
18 Jan 2008 Arrived from Suzhou (batch of 4) as PCBA without modules
current holder: Tony (end of life)
21 Jan 2008 Allen: Added Bluetooth module, reworked for power measurements, broken
18 Jan 2008 Arrived from Suzhou (batch of 4) as PCBA without modules
current holder: Willie
29 Jan 2008 Same as #1 until 29 Jan 2008
current holder: Matt
29 Jan 2008 Matt: Found out jack insert interrupt line is floating
18 Jan 2008 Arrived from Suzhou (batch of 4) as PCBA without modules
5 Feb 2008 There are some hardware components broken. The behavior of i2c accessing is strange. And its suspend current is quite high (14~15mA).
current holder: Tony (end of life)
21 Jan 2008 Allen: Added Bluetooth module, reworked for power measurements, broken
18 Jan 2008 Arrived from Suzhou (batch of 4) as PCBA without modules
current holder: Miles
29 Jan 2008 Miles: receiver test failed (receiver broken)
29 Jan 2008 Same as #1 until 29 Jan 2008
current holder: Tony (available)
29 Jan 2008 Willie: verified
current holder: Andy
29 Jan 2008 sent to Andy
29 Jan 2008 Willie: verified
current holder: Werner
30 Jan 2008 sent to Werner
29 Jan 2008 Willie: verified
current holder: Andy
02 Feb 2008 I see similar behaviour to #15 today on battery + USB. Appears to be related to, eg, starting LCM backlight making power problems resulting in immediate shutdown. Current limit issue somehow?
01 Feb 2008 Behaving well.
29 Jan 2008 sent to Andy
29 Jan 2008 Same as #1 until 29 Jan 2008
current holder: Harald
29 Jan 2008 sent to Harald
29 Jan 2008 Same as #1 until 29 Jan 2008
current holder: Werner
30 Jan 2008 sent to Werner
30 Jan 2008 Miles: verified hardware, same exceptions as below
30 Jan 2008 Allen Chang: reworked to add NOR protection (R2505 closed, R2506 opened)
29 Jan 2008 Miles: verified hardware, except for
28 Jan 2008 Tony: Put inside GTA01 case, speaker, antennas
28 Jan 2008 Tony: Rework wifi FW to 2.0.0.40
28 Jan 2008 Batch of 10 from Suzhou, PCBA with all modules, wifi FW 1.3, NOR protection disabled, full DM1 (v009) and DM2 (v012)