View source for Talk:MokoMakefile
From Openmoko
You do not have permission to edit this page, for the following reasons:
You can view and copy the source of this page:
Return to Talk:MokoMakefile.
You do not have permission to edit this page, for the following reasons:
You can view and copy the source of this page:
Return to Talk:MokoMakefile.
With old git-1.4.x, fetching uboot does not work: Use 1.5.x:
NOTE: package uboot-gta01-1.2.0+svnnow-r4_14da5f7675bbb427c469e3f45006e027b6e21db9_0_1811: task do_fetch: started fatal: corrupted pack file .git/objects/pack/pack-a146bcbc18f4826d6bf2a7f63be5dd77bbb5b2f5.pack
/bin/sh ./libtool --mode=compile ccache gcc -DHAVE_CONFIG_H -I.... -W... -O2 -c -o libbfd.lo build/tmp/work/armv4t-linux/binutils-cross-2.17-r0/binutils-2.17/bfd/libbfd.c ccache gcc -DHAVE_CONFIG_H -I... -W... -O2 -c /usr/local/oe/build/tmp/work/armv4t-linux/binutils-cross-2.17-r0/binutils-2.17/bfd/libbfd.c -o t shift count >= width of type make[5]: *** [libbfd.lo] Error 1
Any insight here? --Adam 23:10, 15 May 2007 (CEST)
Install stuff needed for OpenMoko:
# yum install python m4 make wget curl ftp cvs monotone subversion \ tar bzip2 gzip unzip python-psyco ccache perl texinfo texi2html \ diffstat openjade docbook-style-dsssl docbook-style-xsl docbook-dtds \ docbook-utils sed bison bc glibc-devel gcc binutils pcre pcre-devel git \ quilt groff linuxdoc-tools patch compat-gcc-34 lynx netpbm
(notice compat-gcc-34 wich was needed for FC6 (gcc 4 installed), and lynx which is needed by qemu (no fallback to wget, curl, or links at the moment and no check for it, resulting in strange "sleep" errors when trying to build without lynx).
Build it:
$ make setup $ make openmoko-devel-image $ unset LD_LIBRARY_PATH $ make update-makefile && make update && make setup && make openmoko-devel-image
I have also done a
$ unset LD_LIBRARY_PATH; make update-makefile && nice make update && nice make setup && nice make all
(This takes several hours)
Build qemu:
$ make qemu
Run it:
# echo 1024 > /proc/sys/dev/rtc/max-user-freq $ make run-qemu
This will bring up the OpenMoko :) Use SPACE for AUX and ENTER for POWER. Not quite the same as holding a Neo1973 in your hands I would guess, but this is the best we can do for now. Thanks!
MokoMakefile requires more than 512 MB of RAM + Swap space (around 1GB?).
If you need swap, please check that its size under Feisty is not null!
Bug #105490 describes the current issue and offers a workaround (23 Jul 07).
on Gentoo Linux, it fails compiling bluez-utils (I've tried also "make clean-package-bluez-utils" before the following command)
do a "make build-package-libusb; make clean-package-bluez-utils" and it should continue (the bluez-utils .bb is missing the libusb dependency)
ltrace package fails to build with error:
... checking for pid_t... yes checking for getopt... yes checking for getopt_long... yes checking gelf.h usability... no checking gelf.h presence... no checking for gelf.h... no configure: error: ***** gelf.h not found ***** FATAL: oe_runconf failed
FIX: edit /home/moko/build/tmp/work/armv4t-linux/ltrace-0.4-r0/ltrace-0.4/configure.ac at line 44: remove the following block:
for path in /usr/include/elfutils /usr/local/include/elfutils \ /usr/include/libelf /usr/local/include/libelf; do if test -f ${path}/gelf.h; then CPPFLAGS="$CPPFLAGS -I ${path}" fi done
( it adds /usr/include/elfutils to path, which causes cross-compile badness error )
/usr/include/linux/usbdevice_fs.h:116: error: variable or field `__user' declared void /usr/include/linux/usbdevice_fs.h:116: error: syntax error before '*' token /home/moko/openmoko/trunk/src/host/qemu-neo1973/usb-linux.c: In function `usb_host_handle_control': /home/moko/openmoko/trunk/src/host/qemu-neo1973/usb-linux.c:103: error: invalid application of `sizeof' to incomplete type `usbdevfs_ctrltran sfer' /home/moko/openmoko/trunk/src/host/qemu-neo1973/usb-linux.c: In function `usb_host_handle_data': /home/moko/openmoko/trunk/src/host/qemu-neo1973/usb-linux.c:120: error: storage size of 'bt' isn't known /home/moko/openmoko/trunk/src/host/qemu-neo1973/usb-linux.c:132: error: invalid application of `sizeof' to incomplete type `usbdevfs_bulktran sfer' /home/moko/openmoko/trunk/src/host/qemu-neo1973/usb-linux.c:120: warning: unused variable `bt' /home/moko/openmoko/trunk/src/host/qemu-neo1973/usb-linux.c: In function `usb_host_device_open': /home/moko/openmoko/trunk/src/host/qemu-neo1973/usb-linux.c:199: error: storage size of 'ctrl' isn't known /home/moko/openmoko/trunk/src/host/qemu-neo1973/usb-linux.c:202: error: invalid application of `sizeof' to incomplete type `usbdevfs_ioctl' /home/moko/openmoko/trunk/src/host/qemu-neo1973/usb-linux.c:199: warning: unused variable `ctrl' make[2]: *** [usb-linux.o] Error 1
FIX: edit /home/moko/openmoko/trunk/src/host/qemu-neo1973/usb-linux.c at line 29 add the following (before #include <linux/usbdevice_fs.h>)
#include <linux/compiler.h>
hint: there is a copy of the file in /home/moko/build/tmp/work/i686-linux/qemu-native-0.9.0+cvs20070613-r5/qemu/usb-linux.c
see: http://osdir.com/ml/emulators.kvm.devel/2007-01/msg00101.html
make openmoko-devel-image ... | Collected errors: | ERROR: Cannot satisfy the following dependencies for task-openmoko-debug: | fstests NOTE: Task failed: /no-backup/Moko/build/tmp/work/fic-gta01-linux/openmoko-devel-image-1.0-r0/temp/log.do_rootfs.25036 NOTE: package openmoko-devel-image-1.0-r0: task do_rootfs: failed ERROR: TaskFailed event exception, aborting
Failed on debian etch 2007-07-20 Solution from mailing list post from hardskinone, report of an irc chat
I got help in IRC channel. I do following steps * remove fstest from oe/packages/tasks/task-openmoko.bb , * increase PR field by one * make openmoko-devel-image
if you encounter the following error:
| In file included from utimecmp.c:40: | utimens.h:2: error: conflicting types for 'futimens' | /usr/include/sys/stat.h:370: error: previous declaration of 'futimens' was here
a patch is needed because your glibc is too new. grab & enable the patch as follows
cd openembedded/packages/coreutils mv coreutils_5.3.0.bb coreutils_5.3.0.orig wget http://www.openembedded.org/repo/org.openembedded.dev/packages/coreutils/coreutils_5.3.0.bb cd - cd openembedded/packages/coreutils/coreutils-5.3.0 wget http://www.openembedded.org/repo/org.openembedded.dev/packages/coreutils/coreutils-5.3.0/futimens.patch cd -
Change the line on openembedded/packages/mtd/mtd-utils_1.0.0+git.bb
which reads:
SRC_URI = "git://git.infradead.org/mtd-utils.git;protocol=git;tag=master \
to:
SRC_URI = "git://git.infradead.org/mtd-utils.git;protocol=git;tag=a6fa706fe9e7696b4b2045edf9698c3bac07e3e3 \
which forces the recipe to use an older revision (the one which worked last time I built the image on my computer).
Be sure to remember to undo the change later, or else you will not get any new changes to that package. --CesarB 04:48, 25 July 2007 (CEST)
Note: these patches should be updated - the lzo patch is included in the current version, so backing off to the previous version and repatching seems silly. I was able to make it through this part of the build by applying the remaining patches manually. --Ted Lemon 15:44, 29 July 2007 (CDT)
If you are running Ubuntu Feisty Fawn on a PowerPC computer you will experience problems running monotone. To fix this issue you need to install monotone as well as the libboost packages from Gutsy. The easiest way to accomplish this is to add the gutsy repositories to your sources.list and change the preferences to look like this:
Package: * Pin: release a=feisty Pin-Priority: 700 Package: * Pin: release a=gutsy Pin-Priority: -100 Package: libc6 libc6-dev tzdata util-linux libgcc1 libstdc++6 monotone Pin: release a=gutsy Pin-Priority: 800 Package: libboost-* Pin: release a=gutsy Pin-Priority: 800
After doing this install monotone in this way:
apt-get -t gutsy install monotone.
That should install monotone 0.35 with updated (and working) boost libraries.
Adjust the following command to your system, then run it:
export LD_LIBRARY_PATH=/home/moko/build/tmp/work/x86_64-linux/ncurses-native-5.4-r8/ncurses-5.4/lib
Then start make again and it should pick up where it left off.
You can get a list of potential paths to use with the following command from you main moko directory:
find . | grep libncurses
The basic problem is that it is linking against your main system libraries instead of the OpenEmbedded ones.
There's probably a cleaner way of handling this - please update this entry if you know it.
This has been fixed in Openembedded, see Openembedded Bug #2554 for further details.
Changes in the GIT of U-Boot make the OpenMoko patches unapplyable. For the use of Revision cc3023b9f95d7ac959a764471a65001062aecf41 and everything will be fine for now.
After following every bit of advice I can find to 'make clean' and nuke the perl build directories, every build comes up with:
| make[1]: Entering directory `/src/openmoko/build/tmp/work/i686-linux/perl-native-5.8.7-r3/perl-5.8.7' | make[1]: *** No rule to make target `<command-line>', needed by `miniperlmain.o'. Stop. | make[1]: Leaving directory `/src/openmoko/build/tmp/work/i686-linux/perl-native-5.8.7-r3/perl-5.8.7' | FATAL: oe_runmake failed NOTE: Task failed: /src/openmoko/build/tmp/work/i686-linux/perl-native-5.8.7-r3/temp/log.do_compile.19531 NOTE: package perl-native-5.8.7-r3: task do_compile: failed
Solution turned out to be editing /src/openmoko/build/tmp/work/i686-linux/perl-native-5.8.7-r3/perl-5.8.7/makedepend.SH and at line 169 change the regexp to eat references to "<command.line>" to catch what was leaking through.
Gettext's build is broken unless you have emacs installed. Crazy though it seems. You will see an error like:
| WARNING: Warnings can be ignored. :-) | if test "no" != no; then \ | set x; \ | list='po-mode.el po-compat.el'; for p in $list; do \ | if test -f "$p"; then d=; else d="./"; fi; \ | set x "$@" "$d$p"; shift; \ | done; \ | shift; \ | EMACS="no" /bin/bash ../../config/elisp-comp "$@" || exit 1; \ | if test "no" != no; then \ | set x; \ | list='po-mode.el po-compat.el'; for p in $list; do \ | if test -f "$p"; then d=; else d="./"; fi; \ | set x "$@" "$d$p"; shift; \ | done; \ | shift; \ | EMACS="no" /bin/bash ../../config/elisp-comp "$@" || exit 1; \ | else : ; fi | mv: cannot move `elc-temp' to `elc-stamp': No such file or directory | make[5]: Leaving directory `/home/raster/moko/build/tmp/work/i686-linux/gettext-native-0.14.1-r5/gettext-0.14.1/gettext-tools/misc' | make[5]: *** [elc-stamp] Error 1 | make[5]: Leaving directory `/home/raster/moko/build/tmp/work/i686-linux/gettext-native-0.14.1-r5/gettext-0.14.1/gettext-tools/misc' | make[4]: *** [po-mode.elc] Error 2 | make[4]: *** Waiting for unfinished jobs.... | make[4]: Leaving directory `/home/raster/moko/build/tmp/work/i686-linux/gettext-native-0.14.1-r5/gettext-0.14.1/gettext-tools/misc' | make[3]: *** [all-recursive] Error 1 | make[3]: Leaving directory `/home/raster/moko/build/tmp/work/i686-linux/gettext-native-0.14.1-r5/gettext-0.14.1/gettext-tools' | make[2]: *** [all] Error 2 | make[2]: Leaving directory `/home/raster/moko/build/tmp/work/i686-linux/gettext-native-0.14.1-r5/gettext-0.14.1/gettext-tools' | make[1]: *** [all-recursive] Error 1 | make[1]: Leaving directory `/home/raster/moko/build/tmp/work/i686-linux/gettext-native-0.14.1-r5/gettext-0.14.1' | FATAL: oe_runmake failed
The solution is simple - install emacs (example below for debian/ubuntu) and try again:
sudo apt-get install emacs make clean-package-gettext-native-0.14.1-r5 make openmoko-devel-image
make setup works fine, but when running make openmoko-devel-image it fails with the following:
| make[4]: Entering directory `build/tmp/work/armv4t-angstrom-linux-gnueabi/binutils-cross-2.18-r0/binutils-2.18/build.x86_64-linux.arm-angstrom-linux-gnueabi/libiberty/testsuite' | make[4]: Nothing to be done for `install'. | make[4]: Leaving directory `build/tmp/work/armv4t-angstrom-linux-gnueabi/binutils-cross-2.18-r0/binutils-2.18/build.x86_64-linux.arm-angstrom-linux-gnueabi/libiberty/testsuite' | make[3]: Leaving directory `build/tmp/work/armv4t-angstrom-linux-gnueabi/binutils-cross-2.18-r0/binutils-2.18/build.x86_64-linux.arm-angstrom-linux-gnueabi/libiberty' | make[2]: Nothing to be done for `install-target'. | make[2]: Leaving directory `build/tmp/work/armv4t-angstrom-linux-gnueabi/binutils-cross-2.18-r0/binutils-2.18/build.x86_64-linux.arm-angstrom-linux-gnueabi' | make[1]: Leaving directory `build/tmp/work/armv4t-angstrom-linux-gnueabi/binutils-cross-2.18-r0/binutils-2.18/build.x86_64-linux.arm-angstrom-linux-gnueabi' | rmdir: build/tmp/cross//home/techiem2/Moko/build/tmp/cross/lib/gcc-lib: No such file or directory | rmdir: build/tmp/cross//home/techiem2/Moko/build/tmp/cross/lib: No such file or directory | rmdir: build/tmp/cross//home/techiem2/Moko/build/tmp/cross: No such file or directory | mv: cannot stat `build/tmp/cross/lib/libiberty.a': No such file or directory NOTE: Task failed: build/tmp/work/armv4t-angstrom-linux-gnueabi/binutils-cross-2.18-r0/temp/log.do_stage.9730 NOTE: package binutils-cross-2.18-r0: task do_populate_staging: failed ERROR: TaskFailed event exception, aborting NOTE: package binutils-cross-2.18: failed ERROR: Build of openembedded/packages/binutils/binutils-cross_2.18.bb do_populate_staging failed ERROR: Task 1641 (openembedded/packages/binutils/binutils-cross_2.18.bb, do_populate_staging) failed NOTE: Tasks Summary: Attempted 107 tasks of which 107 didn't need to be rerun and 1 failed. ERROR: 'openembedded/packages/binutils/binutils-cross_2.18.bb' failed make: *** [openmoko-devel-image] Error 1
The final reason why the build cannot continue is:
mv: cannot stat `/home/techiem2/Moko/build/tmp/cross/lib/libiberty.a': No such file or directory
Likely, Gentoo/AMD64 uses lib64 instead of lib as the library directory for x86_64 libraries. It's l likey that may (or all?) AMD64 distributions do for their 64-bit binaries. At least on openSUSE-x86_64, the same happens.
At least on openSUSE-10.3 the missing libiberty.a was inatalled to build/tmp/cross/lib64/libiberty.a, which is clearly wrong.
After seeing this, I assumed that openmoko/openembedded was clearly not tested with lib64 build hosts and since that would mean that even if I'd fix that error, many others could follow, and as I was not interested to fix the lib64 bugs but rather wanted to see something running first, I decided to make openmoko/openembedded think that it was running on a normal 32-bit non-lib64 machine.
There are several ways to do that:
I decided to go for the last option - to install a 32-bit development environment and use that:
Install the following packages for the 32-bit C/C++ compiler target option -m32 to work and to compile what is needed
gcc-32bit libgcc42-32bit glibc-devel-32bit libstdc++-devel-32bit ncurses-devel-32bit zlib-devel-32bit (maybe also gtk2-devel-32bit)
The openSUSE 10.3-AMD64 has no libopenssl-devel-32bit, but you can install the 32-bit rpm from the i586 10.3 rpm tree:
libopenssl-devel
For MokoMakefile to not fail on compiling qemu-user, you need to use gcc33:
wget download.opensuse.org/repositories/devel:/tools:/gcc/openSUSE_Factory/i586/{cpp,gcc}33-3.3.3-41.8.i586.rpm rpm -Uhv {cpp,gcc}33-3.3.3-41.8.i586.rpm
Note these need to be the 32-bit cpp33 and gcc33 rpms as the 64-bit gcc33 rpms for openSUSE do not support the 32-bit target.
Then I used
linux32
In order to build moko with the personality of the system set to i686 (uname -m changes to i686):
cd ~/moko linux32 su - $USERNAME
And set up gcc scripts which force the use of gcc-3.3 (it can only generate 32-bit assembly) for all compilation:
mkdir bin;cd bin echo '/usr/bin/${0##*/}-3.3 -m32 "$@"' >gcc echo '/usr/bin/${0##*/} -m elf_i386 "$@"' >ld echo '/usr/bin/${0##*/} --32 "$@"' >gas sed -i '1i#!/bin/sh' gcc gas ld chmod 755 gcc gas ld ln -s gcc cc ln -s gcc c++ ln -s gcc g++ ln -s gas as echo PATH=\""$PWD":\$PATH\" >.setup-gcc-m32 cd -
Then set the path and test it:
source bin/.setup-gcc-m32 type gcc
It would be of course much better to fix the binutils build, maybe it's the only build which is broken because binutils may be a special package, going into the directory where it compiled and grepping for lib64 could help to find the bug.
On my system (Kubuntu 6.10) build failed with message "ERROR: QEMU requires SDL or Cocoa for graphical output" because package libsdl-image1.2-dev was missing. Use apt-get install libsdl-image1.2-dev to install. Additionally I had to install packages cvs and diffstat. I was also asked to install Psyco JIT Compiler (package python-psyco) to increase performance. Nevertheless make flash-qemu-local took some hours, but now I finally can get an impression of the phone that I am looking for! -- Nichtich 00:26, 20 September 2007 (CEST)
The latest(as of Sept. 25, 2007) build started to fail with the following error:
| checking for GLIB... no | configure: error: | *** Glib 2.14.0 or better is required. The latest version of | *** Glib is always available from ftp://ftp.gtk.org/. | FATAL: oe_runconf failed NOTE: Task failed: /media/sdc1/moko/build/tmp/work/armv4t-angstrom-linux-gnueabi/\ pango-directfb-1.18.1-r0/temp/log.do_configure.19927 NOTE: package pango-directfb-1.18.1-r0: task do_configure: failed ERROR: TaskFailed event exception, aborting NOTE: package pango-directfb-1.18.1: failed ERROR: Build of /media/sdc1/moko/openembedded/packages/pango/\ pango-directfb_1.18.1.bb do_configure failed
The Glib included in the build tree seems to be only 2.12.12, so looks like something is broken in term of dependency.
This had happened on both of Fedora 7 and Debian Etch. I am running the latest MokoMakefile with OM-2007.2. The funny thing is that the build had worked only couple nights ago. Any idea? I will update anything I find here and also on my blog(see my user profile). ttz Wed Sep 26 12:17:33 CDT 2007
pango-directfb had been removed from OE for now due to the report of it breaking builds like OpenMoko.
ttz Thu Oct 4 10:20:12 CDT 2007
This is solved by installing libz-dev
Or, look at Bug #747
osiris$ make update ... Fetching external item into 'trunk/src/target/OM-2007.2/applications/openmoko-today2/libkoto' svn: REPORT request failed on '/repos/tasks/!svn/vcc/default' svn: REPORT of '/repos/tasks/!svn/vcc/default': 200 OK (http://svn.o-hand.com) make: *** [update-openmoko] Error 1
osiris$ cd openmoko/trunk/src/target/OM-2007.2/applications/openmoko-today2//libkoto/ osiris$ svn up -r HEAD svn: REPORT request failed on '/repos/tasks/!svn/vcc/default' svn: REPORT of '/repos/tasks/!svn/vcc/default': 200 OK (http://svn.o-hand.com)
Anyone know about this one? --Blackh 00:11, 12 October 2007 (CEST)
| install: cannot stat `/home/blackh/src/openmoko/moko/build/tmp/work/armv4t-angstrom-linux-gnueabi/ glibc-intermediate-2.5-r7/glibc-2.5/sunrpc/rpcsvc/bootparam_prot.h' No such file or directory NOTE: Task failed: /home/blackh/src/openmoko/moko/build/tmp/work/armv4t-angstrom-linux-gnueabi/ glibc-intermediate-2.5-r7/temp/log.do_stage.3940
For some reason, on Debian, the rpcgen command needs "-Y /usr/bin" added to the end of it or it won't work ("cannot find any C preprocessor (cpp)"). This can be fixed by hand...
cd /home/blackh/src/openmoko/moko/build/tmp/work/armv4t-angstrom-linux-gnueabi/ glibc-intermediate-2.5-r7/glibc-2.5/sunrpc/rpcsvc for f in *.x ; do rpcgen -h $f -o ${f%%.x}.h -Y /usr/bin ; done
This command will generate the right files and you can resume the build with
make openmoko-devel-image
Here is a better fix - put this script, calling it rpcgen, somewhere in your PATH before /usr/bin:
#!/bin/sh exec /usr/bin/rpcgen -Y /usr/bin "$@"
--Blackh 05:17, 12 October 2007 (CEST)