View source for Neo1973 Hardware/de
From Openmoko
You do not have permission to edit this page, for the following reasons:
You can view and copy the source of this page:
Template used on this page:
Return to Neo1973 Hardware/de.
You do not have permission to edit this page, for the following reasons:
You can view and copy the source of this page:
Template used on this page:
Return to Neo1973 Hardware/de.
Diese Seite befindet sich im Aufbau. Manche Stellen sind nicht oder nur teilweise übersetzt. Die englische Version dieser Seite findet sich hier .
Der Hauptprozessor (CPU) im Neo1973 ist ein "Samsung S3C2410AL-26" (Er kann auf bis zu 266MHz getaktet werden)
64MB Samsung NAND flash (K9F1208U0B), verbunden mit dem NAND controller im S3C2410.
Das ist der einzige Flash-Speicher neben der microSD-Karte in diesem Gerät. Der S3C2410 booted direkt vom "nand" mittels des S3C2410 Steppingstone.
Es wird nur freie Software benutzt, deshalb auch keine geschützten Flash-Filesysteme. Weitere Informationen zum NAND finden sich unter NAND bad blocks.
128MB SDRAM (2x Samsung K4M511633C), direkt verbundem mit dem S3C2410 SDRAM controller.
Das GSM/GPRS Modem basiert auf "Texas Instruments Calypso".
Leider gibt es zum GSM Chipsatz wegen strikten Geheimhaltungsvertägen nur sehr wenige Informationen. Allerdings kommuniziert der calypso über einen normalen seriellen UART mit dem S3C2410. Hier werden GSM 07.05, GSM 07.10 und andere standartisierte Protokolle benutzt.
-- xkr47: Could we at least know the GPRS capabilitiy class and the GPRS multislot class ?
Homepage: TWL3014
Homepage: TRF6151
Hammerhead AGPS von Global Locate.
Das Neo1973 hat einen Slot für microSD/Transflash. SDHC sollte funktionieren, wurde aber mangels microSD-Karten >2GB noch nicht getestet. Falls ja, sollten solche Speicherkarten keine Probleme bereiten.
Verwendet wird ein 2.8" 480x640 toppoly (tpo) TD028TTEC1 Modul, angesteuert mit einem Toshiba JBT6K74 TFT LCD Driver Chipset.
Scheinbar identisch zu Diesem auf ebay
Delta DFBM-CS320 Class2 Modul, benutzt CSR BlueCore4
Der USB Host Controller ist im S3C2410 integriert.
Der USB Device controller ist im S3C2410 integriert.
Siehe: Neo1973 Audio Subsystem
Verwendet wird der Codierer-Decodierer WM8753 von Wolfson Microelectronics. Der Baustein kann keine Formate wie MP3 dekodieren, sondern ist nur eine einfache Sounkarte.
Der von National Semiconductor Stereo Verstärker LM4857 ist direkt mit dem analogen Ausgang des WM8753 verbunden.
Angesteckt wird das Headset über ein klassische 2,5 mmm Klinkenbuchse mit 4 Anschlüssen. Das Headset ist kompatibel zu den Smartphones von Motorola (A780,A1200, V-360, ...).
Das Headset ist über dem PCM-Bus mit dem CSR-Bluetooth Controller und dem Wolfson Codierer-Decodierer verbunden.
Für die Stromversorgung bzw. Stromverwaltung wird ein Philips PCF50606 eingesetzt.
Der Akku vom Neo1973 ist kompatibel mit dem Nokia Akku BL5C. Siehe entsprechenden Beitrag auf der Maillingliste. Hier ist noch ein Foto von dem Akku eingesetzt im Neo1973.
Das Neo1973 bietet zwei Taster an:
This is the most simple, non-bluetooth version of the prototype.
First generation of prototypes that was given to internal OpenMoko software developers.
Unfortunately not useful at all due to non-working touchscreen.
Second generation of prototypes that was given to Harald + Mickey.
Unfortunately still not useful due to half-working touchscreen.
This is the bluetooth-enabled fork of GTA01
This is the first produced version of the bluetooth-enabled version.
This is the second produced version of the bluetooth-enabled version. It contains mainly GPS-related fixes.
This is the version that is shipped in Phase 0
Due to use of wrong GPIO/EINT pin, the PMU cannot wake-up the phone after suspend. This means, specifically, the following events can not bring the phone back from suspend-to-ram:
This is due to a design bug resulting in at least 30mA additional standby current, since we cannot properly switch off the power supply to the S3C2410 PLL's. There is nothing we can do to change this with post-production fixes. GTA01Bv4 will address this issue.
The GSM modem currently doesn't signalize a wakeup interrupt to the S3C2410 in case there's some noteworthy event, such as incoming call, loss of network, incoming SMS or the like.
This is a serious issue, but can be fixed with a GSM Modem Firmware update.
The local feedback sidetone (see [1]) is too loud. This will be addressed in a GSM firmware update
Due to an error in the production process, the factory-programmed NAND bad block information has been lost. This means that some blocks in the flash will wear out rapidly, which might become as bad as rendering the device unusable.
This is the version that will be shipped in Phase 1
Every hardware revision has its own u-boot image type. Thus, the bootloader has the revision hard-coded. The hardware revision is passed on to the kernel via the ATAG mechanism (ATAG_REVISION)
The kernel receives the ATAG_REVISION during bootup, and saves its contents in the "system_rev" global variable.
The kernel exports the system_rev variable in /proc/cpuinfo as "Revision :" line.
Languages: |
English • العربية • Български • Česky • Dansk • Deutsch • Esperanto • Eesti • Español • فارسی • Suomi • Français • עברית • Magyar • Italiano • 한국어 • Nederlands • Norsk (bokmål) • Polski • Português • Română • Русский • Svenska • Slovenčina • Українська • 中文(中国大陆) • 中文(台灣) • Euskara • Català |