USB Product IDs

From Openmoko

(Difference between revisions)
Jump to: navigation, search
m (Assigned/Allocated Openmoko USB Product IDs)
(move to github)
 
Line 35: Line 35:
 
Openmoko is using the USB Vendor and Product IDs below.  Note that '''0x1457''' is the Vendor ID of '''FIC, Inc''', and '''0x1d50''' is the vendor ID of '''Openmoko, Inc.'''
 
Openmoko is using the USB Vendor and Product IDs below.  Note that '''0x1457''' is the Vendor ID of '''FIC, Inc''', and '''0x1d50''' is the vendor ID of '''Openmoko, Inc.'''
  
{| border=1 |
+
The current list of allocations can be found at https://raw.githubusercontent.com/openmoko/openmoko-usb-oui/master/usb_product_ids.psv
| Vendor ID || Product ID || Description
+
|-
+
| 0x1d50  || 0x1db5 || [http://www.almesberger.net/misc/idbg/ IDBG] in DFU mode
+
|-
+
| 0x1d50  || 0x1db6 || [http://www.almesberger.net/misc/idbg/ IDBG] in normal mode
+
|-
+
| 0x1d50 || 0x4xxx || Reserved for the [http://osmocom.org/ Osmocom] project
+
|-
+
| 0x1457 / 0x1d50  || 0x5117 || Neo1973/FreeRunner kernel usbnet (g_ether, CDC Ethernet) Mode
+
|-
+
| 0x1457 / 0x1d50 || 0x5118 || Debug Board (FT2232D) for Neo1973/FreeRunner
+
|-
+
| 0x1457 / 0x1d50 || 0x5119 || Neo1973/FreeRunner u-boot usbtty CDC ACM Mode
+
|-
+
| 0x1457 / 0x1d50 || 0x511a || HXD8 u-boot usbtty CDC ACM Mode
+
|-
+
| 0x1457 / 0x1d50 || 0x511b || SMDK2440 u-boot usbtty CDC ACM mode
+
|-
+
| 0x1457 / 0x1d50 || 0x511c || SMDK2443 u-boot usbtty CDC ACM mode
+
|-
+
| 0x1457 / 0x1d50 || 0x511d || QT2410 u-boot usbtty CDC ACM mode
+
|-
+
| 0x1457 / 0x1d50 || 0x511e || Reserved
+
|-
+
| 0x1457 / 0x1d50 || 0x511f || Reserved
+
|-
+
| 0x1457 / 0x1d50 || 0x5120 || Neo1973/FreeRunner u-boot generic serial Mode
+
|-
+
| 0x1457 / 0x1d50 || 0x5121 || Neo1973/FreeRunner kernel mass storage (g_storage) Mode
+
|-
+
| 0x1457 / 0x1d50 || 0x5122 || Neo1973/FreeRunner kernel usbnet (g_ether, RNDIS) Mode
+
|-
+
| 0x1457 / 0x1d50 || 0x5123 || Neo1973/FreeRunner internal USB Bluetooth CSR4 module
+
|-
+
| 0x1457 / 0x1d50 || 0x5124 || Neo1973/FreeRunner Bluetooth Device ID service
+
|-
+
| 0x1457 / 0x1d50 || 0x5125 || TBD *R!*
+
|-
+
| 0x1457 / 0x1d50 || 0x5126 || TBD *R!*
+
|-
+
| 0x1d50 || 0x5200-0x52ff || Reserved for use in documentation concerning the configuration of USB buses and devices.
+
|-
+
| 0x1d50 || 0x5300-0x53ff || [http://rockbox.org/ rockbox: free replacement firmware for digital music players]
+
|-
+
| 0x1d50 || 0x6000 || [http://ubertooth.sourceforge.net/ Ubertooth Zero]
+
|-
+
| 0x1d50 || 0x6001 || [http://ubertooth.sourceforge.net/ Ubertooth Zero DFU]
+
|-
+
| 0x1d50 || 0x6002 || [http://ubertooth.sourceforge.net/ Ubertooth One]
+
|-
+
| 0x1d50 || 0x6003 || [http://ubertooth.sourceforge.net/ Ubertooth One DFU]
+
|-
+
| 0x1d50 || 0x6004 || LeoLipo // (Arduino Leonardo clone with LiPo charger)
+
|-
+
| 0x1d50 || 0x6005 || [http://cccgoe.de/wiki/LED_Flower_S LED Flower S]
+
|-
+
| 0x1d50 || 0x6006 || [http://cccgoe.de/wiki/LED_Cube LED Cube]
+
|-
+
| 0x1d50 || 0x6007 || [http://cccgoe.de/wiki/LED_Flower LED Flower]
+
|-
+
| 0x1d50 || 0x6008 || [https://www.kismetwireless.net/kisbee/ Kisbee 802.15.4 transceiver]
+
|-
+
| 0x1d50 || 0x6009 || [http://adjacentreality.org/ Adjacent Reality Tracker]
+
|-
+
| 0x1d50 || 0x600a || [https://github.com/sowbug/avr-programmer AVR Programmer]
+
|-
+
| 0x1d50 || 0x600b || [https://github.com/sowbug/hypnagogo Hypna Go Go]
+
|-
+
| 0x1d50 || 0x600c || [https://github.com/Miceuz/CatNip CatNip LPC1343 development board]
+
|-
+
| 0x1d50 || 0x600d || [http://robotgrrl.com/robobrrd Enhanced RoboBrrd Brain Board]
+
|-
+
| 0x1d50 || 0x600e || [http://opencores.org/or1k/Ordb2a-ep4ce22 OpenRISC Ordb2a-ep4ce22 development board]
+
|-
+
| 0x1d50 || 0x600f || [http://paparazzi.enac.fr/wiki/Main_Page Paparazzi Lisa/M (DFU)]
+
|-
+
| 0x1d50 || 0x6010 || [http://www.openpipe.cc/ OpenPipe: OSHW Bagpipes MIDI controller]
+
|-
+
| 0x1d50 || 0x6011 || LeoLipo (DFU)
+
|-
+
| 0x1d50 || 0x6012 || [http://www.ohwr.org/projects/c64cartridge/wiki Universal C64 Cartridge]
+
|-
+
| 0x1d50 || 0x6013 || [http://www.discferret.com/ DiscFerret magnetic disc analyser (Bootloader)]
+
|-
+
| 0x1d50 || 0x6014 || [http://www.discferret.com/ DiscFerret magnetic disc analyser // (Active/run)]
+
|-
+
| 0x1d50 || 0x6015 || [http://smoothieware.org/smoothieboard Smoothieboard]
+
|-
+
| 0x1d50 || 0x6016 || [http://www.sparkyswidgets.com/Projects/pHInterface.aspx phInterface]
+
|-
+
| 0x1d50 || 0x6017 || [http://www.blacksphere.co.nz/main/blackmagic Black Magic Debug Probe (DFU)]
+
|-
+
| 0x1d50 || 0x6018 || [http://www.blacksphere.co.nz/main/blackmagic Black Magic Debug Probe (Application)]
+
|-
+
| 0x1d50 || 0x6019 || [http://github.com/kliment/reup 4pi 5 axis motion controller]
+
|-
+
| 0x1d50 || 0x601a || [http://paparazzi.enac.fr/wiki/Main_Page Paparazzi Lisa/M // (Application)]
+
|-
+
| 0x1d50 || 0x601b || [http://radiokot.ru/circuit/digital/measure/53/ IST-2 chronograph for bullet speeds]
+
|-
+
| 0x1d50 || 0x601c || [http://epos.lisha.ufsc.br/EPOSMote+II EPOSMote II]
+
|-
+
| 0x1d50 || 0x601d || [http://toughlog.org/uds18b20 UDS18B20 Temperature Sensor]
+
|-
+
| 0x1d50 || 0x601e || [https://github.com/kapusy/stm32 5x5 STM32 prototyping board]
+
|-
+
| 0x1d50 || 0x601f || [http://sites.google.com/site/doynax/µNSF%202012-06-10.tar.gz uNSF] // Portable NSF Player
+
|-
+
| 0x1d50 || 0x6020 || [http://www.sparetimelabs.com/toad3/ Toad3] // 4 Axis CNC controller
+
|-
+
| 0x1d50 || 0x6021 || [http://www.alphasphere.com/ AlphaSphere] // USB peripheral music controller
+
|-
+
| 0x1d50 || 0x6022 || [https://code.google.com/p/lightpack/ LightPack] // monitor light for presence effect strengthening
+
|-
+
| 0x1d50 || 0x6023 || [https://code.google.com/p/pixel-kit/ Pixelkit] // turn old game controllers into USB HID
+
|-
+
| 0x1d50 || 0x6024 || [http://www.illucia.com Illucia] // connect computer programs by physical jacks + cables
+
|-
+
| 0x1d50 || 0x6025 || [http://www.keyglove.net Keyglove] (HID) // Keyboard glove
+
|-
+
| 0x1d50 || 0x6026 || [http://www.keyglove.net Keyglove] (USB-Serial) // Keyboard glove
+
|-
+
| 0x1d50 || 0x6027 || [http://www.key64.org/ Key64 Keyboard]
+
|-
+
| 0x1d50 || 0x6028 || Teensy 2.0 Development Board [[http://deskthority.net/workshop-f7/split-ergonomic-keyboard-project-t1753.html ErgoDox] keyboard] // ergonomic keyboard
+
|-
+
| 0x1d50 || 0x6029 || [https://github.com/ErikZalm/Marlin Marlin 2.0 (USB Serial)]
+
|-
+
| 0x1d50 || 0x602a || [https://github.com/ErikZalm/Marlin Marlin 2.0 (Mass Storage)]
+
|-
+
| 0x1d50 || 0x602b || [http://www.makestuff.eu/wordpress/?page_id=1400 FPGALink] USB FPGA communication
+
|-
+
| 0x1d50 || 0x602c || [http://dev.telynishiya.info/?page_id=74 5nes5snes] Nintendo / Supernintendo Controller USB Adapter (5x8)
+
|-
+
| 0x1d50 || 0x602d || [http://dev.telynishiya.info/?page_id=74 5nes5snes] Nintendo / Supernintendo Controller USB Adapter (4x12)
+
|-
+
| 0x1d50 || 0x602e || [http://www.flexibity.com/ Flexibity] Open Sensors Toolkit for home and environment monitoring
+
|-
+
| 0x1d50 || 0x602f || [http://kcopter.blogspot.com K-copter] Open Source multicopter project
+
|-
+
| 0x1d50 || 0x6030 || [http://www.stanson.ch/index.php?page=proj&proj=USB-oscope USB-oscope] simply DIY USB scope
+
|-
+
| 0x1d50 || 0x6031 || [http://akb77.com/g/gps/handmake-gsm-gps-tracker-second-edition/ handmade gsm gps tracker]
+
|-
+
| 0x1d50 || 0x6032 || [https://github.com/nekromant/uisp-schematics ncrmnt.org USB Device]
+
|-
+
| 0x1d50 || 0x6033 || [https://github.com/frobiac/adnw frobiac / adnw keyboard]
+
|-
+
| 0x1d50 || 0x6034 || [http://code.google.com/p/tiflomag-ergo-2/ Tiflomag Ergo 2] MP3 player for visually impaired people
+
|-
+
| 0x1d50 || 0x6035 || [http://3zu.ru/projects/lasertag/wiki FreeLaserTag Gun] game based on IR (Infra Red) toy guns
+
|-
+
| 0x1d50 || 0x6036 || [http://3zu.ru/projects/lasertag/wiki FreeLaserTag Big Brother] game based on IR (Infra Red) toy guns
+
|-
+
| 0x1d50 || 0x6037 || [http://3zu.ru/projects/lasertag/wiki FreeLaserTag Node] game based on IR (Infra Red) toy guns
+
|-
+
| 0x1d50 || 0x6038 || [http://morecatlab.akiba.coocan.jp/morecat_lab/Monaka-e.html Monaka] MIDI-based physical computing platform
+
|-
+
| 0x1d50 || 0x6039 || [https://github.com/holgero/XFD/wiki XFD] eXtreme Feedback Device for continuous integration
+
|-
+
| 0x1d50 || 0x603a || [https://github.com/emfcamp/TiLDA TiLDA] badge for emfcamp
+
|-
+
| 0x1d50 || 0x603b || [http://www.raspiface.com Raspiface] Interface Raspberry Pi with Arduino Leonardo
+
|-
+
| 0x1d50 || 0x603c || [http://paparazzi.enac.fr/wiki/Main_Page Paparazzi] LPCUSB Bootloader
+
|-
+
| 0x1d50 || 0x603d || [http://paparazzi.enac.fr/wiki/Main_Page Paparazzi] LPCUSB Serial
+
|-
+
| 0x1d50 || 0x603e || [http://paparazzi.enac.fr/wiki/Main_Page Paparazzi] LPCUSB Mass Storage
+
|-
+
| 0x1d50 || 0x603f || [http://morecatlab.akiba.coocan.jp/lab/index.php/2012/08/airguitar/?lang=en airGuitar] USB-MIDI guitar like interface
+
|-
+
| 0x1d50 || 0x6040 || [http://morecatlab.akiba.coocan.jp/lab/index.php/2012/06/moco2/?lang=en moco] MIDI IN/OUT converter
+
|-
+
| 0x1d50 || 0x6041 || [http://www.alphasphere.com/ AlphaSphere] - USB peripheral music controller (bootloader)
+
|-
+
| 0x1d50 || 0x6042 || [http://www.taniwha.com/~paul/dspace.robot Dspace robot controller]
+
|-
+
| 0x1d50 || 0x6043 || [http://www.ixbt.com/power/device/pc-power.shtml pc-power] PC Power Consumption Registrator
+
|-
+
| 0x1d50 || 0x6044 || [https://github.com/fabiobaltieri/open-usb-can open-usb-can] Open Source USB CANBUS converter (DFU Mode)
+
|-
+
| 0x1d50 || 0x6045 || [https://github.com/fabiobaltieri/open-usb-can open-usb-can] Open Source USB CANBUS converter (Normal Mode)
+
|-
+
| 0x1d50 || 0x6046 || [https://github.com/drrk/minimus-weigand mimus-weigand] AVR-based device to control Weigand Protocol RFID reader
+
|-
+
| 0x1d50 || 0x6047 || [http://rfcat.googlecode.com RfCat Chronos Dongle]
+
|-
+
| 0x1d50 || 0x6048 || [http://rfcat.googlecode.com RfCat Dons Dongle]
+
|-
+
| 0x1d50 || 0x6049 || [http://rfcat.googlecode.com RfCat Chronos Bootloader]
+
|-
+
| 0x1d50 || 0x604a || [http://rfcat.googlecode.com RfCat Dons Bootloader]
+
|-
+
| 0x1d50 || 0x604b || [http://greatscottgadgets.com/hackrf HackRF Jawbreaker]
+
|-
+
| 0x1d50 || 0x604c || [http://www.makible.com/products/makibox-a6-1 Makibox A6]
+
|-
+
| 0x1d50 || 0x604d || [http://cp3.irmp.ucl.ac.be/projects/paella Paella Pulse height analyzer]
+
|-
+
| 0x1d50 || 0x604e || [http://tomeko.net/miniscope_v2b/ Miniscope v2b]
+
|-
+
| 0x1d50 || 0x604f || [http://tomeko.net/miniscope_v2c/ Miniscope v2c]
+
|-
+
| 0x1d50 || 0x6050 || [http://goodfet.sourceforge.net/ GoodFET]
+
|-
+
| 0x1d50 || 0x6051 || [http://pinocc.io pinocc.io]
+
|-
+
| 0x1d50 || 0x6052 || [http://apbteam.org/ APB Team Robotic Development Board]
+
|-
+
| 0x1d50 || 0x6053 || [git://sukzessiv.net/darkgame.git Darkgame Controller]
+
|-
+
| 0x1d50 || 0x6054 || [https://github.com/satlab/bluebox Satlab/AAUSAT3 BlueBox]
+
|-
+
| 0x1d50 || 0x6055 || [https://github.com/rwinscot/OSH/tree/master/RADiuS/DSMA RADiuS USB Dongle with SMA Connector]
+
|-
+
| 0x1d50 || 0x6056 || [http://sourceforge.net/projects/hidious/ The Glitch]
+
|-
+
| 0x1d50 || 0x6057 || [http://openpipe.cc/products/midi-usb-shield/ OpenPipe MIDI-USB Shield]
+
|-
+
| 0x1d50 || 0x6058 || [http://www.kosagi.com/w/index.php?title=Novena_Main_Page Novena USB OTG Port]
+
|-
+
| 0x1d50 || 0x6059 || [https://github.com/avishorp/xser xser USB-Serial dongle]
+
|-
+
| 0x1d50 || 0x605a || [https://github.com/mossmann/daisho/tree/master/sw/fpga/common/usb3 Daisho USB test]
+
|-
+
| 0x1d50 || 0x605b || [https://github.com/mossmann/cc11xx/tree/master/yardstickone RfCat YARD Stick One]
+
|-
+
| 0x1d50 || 0x605c || [https://github.com/mossmann/cc11xx/tree/master/yardstickone YARD Stick One Bootloader]
+
|-
+
| 0x1d50 || 0x605d || [http://harizanov.com/wiki/wiki-home/funky-sensor-v2/ Funky Sensor v2]
+
|-
+
| 0x1d50 || 0x605e || [https://github.com/blinkiverse/DmxAnalogLed Blinkiverse Analog LED Fader]
+
|-
+
| 0x1d50 || 0x605f || [https://github.com/mdsinstruments/DIPIO Small DIP package Cypress FX2]
+
|-
+
| 0x1d50 || 0x6060 || [https://github.com/mdsinstruments/DIGIO Data logger using the Cypress FX2]
+
|-
+
| 0x1d50 || 0x6061 || [http://fabiobaltieri.com/2013/03/22/power-manager/ Power Manager]
+
|-
+
| 0x1d50 || 0x6062 || [http://www.ohwr.org/projects/wr-cores WhiteRabbit console and USB-Wishbone bridge]
+
|-
+
| 0x1d50 || 0x6063 || [http://cpcfpga.com/ CPC FPGA]
+
|-
+
| 0x1d50 || 0x6064 || [http://cpcfpga.com/ CPC FPGA (DFU)]
+
|-
+
| 0x1d50 || 0x6065 || [http://cpcfpga.com/ CPC FPGA (serial)]
+
|-
+
| 0x1d50 || 0x6066 || [http://nuand.com Nuand BladeRF]
+
|-
+
| 0x1d50 || 0x6067 || [https://github.com/thingotron/orbotron_9000 Orbotron 9000 (serial)]
+
|-
+
| 0x1d50 || 0x6068 || [https://github.com/thingotron/orbotron_9000 Orbotron 9000 (HID)]
+
|-
+
| 0x1d50 || 0x6069 || [https://github.com/avishorp/xser xser (DFU mode)]
+
|-
+
| 0x1d50 || 0x606a || [https://github.com/avishorp/xser xser (legacy mode)]
+
|-
+
| 0x1d50 || 0x606b || [https://github.com/bharrisau/s08-245 S08-245, urJtag compatible firmware for S08JS]
+
|-
+
| 0x1d50 || 0x606c || [http://blinkytape.com Blinkytape full-color light tape]
+
|-
+
| 0x1d50 || 0x606d || [https://github.com/synthetos/TinyG TinyG open source motion controller]
+
|-
+
| 0x1d50 || 0x606e || [http://reefangel.com/download.aspx Reefangel Evolution 1.0]
+
|-
+
| 0x1d50 || 0x606f || [http://schneidersoft.net/USB2CAN Geschwister Schneider USB to CAN adapter]
+
|-
+
| 0x1d50 || 0x6070 || [http://openpinballproject.wordpress.com/ Open Pinball Project]
+
|-
+
| 0x1d50 || 0x6071 || [http://theglitch.sourceforge.net The Glitch HID]
+
|-
+
| 0x1d50 || 0x6072 || [http://theglitch.sourceforge.net The Glitch Disk]
+
|-
+
| 0x1d50 || 0x6073 || [http://theglitch.sourceforge.net The Glitch Serial]
+
|-
+
| 0x1d50 || 0x6074 || [http://theglitch.sourceforge.net The Glitch MIDI]
+
|-
+
| 0x1d50 || 0x6075 || [http://theglitch.sourceforge.net The Glitch RawHID]
+
|-
+
| 0x1d50 || 0x6076 || [http://git.qiprog.org/?p=vultureprog.git;a=summary;js=1 Vultureprog BIOS chip programmer]
+
|-
+
| 0x1d50 || 0x6077 || [https://github.com/moorelogic/PaintDuino PaintDuino]
+
|-
+
| 0x1d50 || 0x6078 || [http://en.techno-innov.fr/technique_dtplug/ DTplug]
+
|-
+
| 0x1d50 || 0x6079 || [https://github.com/q-rai/MoodLightUSB Mood Light USB]
+
|-
+
| 0x1d50 || 0x607a || [https://github.com/scanlime/fadecandy Fadecandy]
+
|-
+
| 0x1d50 || 0x607b || [https://github.com/dn-electronics/RCDongle RCDongle for IR remote control]
+
|-
+
| 0x1d50 || 0x607c || [http://openvizsla.org OpenVizsla USB sniffer/analyzer]
+
|-
+
| 0x1d50 || 0x607d || [https://github.com/sprk/core Spark Core Arduino-compatible board with WiFi]
+
|-
+
| 0x1d50 || 0x607e || [https://github.com/littlewire/Little-Wire OSHUG Wuthering USB multi-tool]
+
|-
+
| 0x1d50 || 0x607f || [https://github.com/sprk/core Spark Core Arduino-compatible board with WiFi (bootloader)]
+
|-
+
| 0x1d50 || 0x6080 || [http://cgit.jvnv.net/arcin/ arcin arcade controller]
+
|-
+
| 0x1d50 || 0x6081 || [https://github.com/Nuand/bladeRF/wiki/Proposal-for-new-FX3-firmware-loading BladeRF bootloader]
+
|-
+
| 0x1d50 || 0x6082 || [https://github.com/scanlime/fadecandy Facecandy (USB DFU loader)]
+
|-
+
| 0x1d50 || 0x6083 || [http://www.lightup.io LightUp (bootloader)]
+
|-
+
| 0x1d50 || 0x6084 || [http://cgit.jvnv.net/arcin/ arcin arcade controller (USB DFU loader)]
+
|-
+
| 0x1d50 || 0x6085 || [https://github.com/irkit/device IRKit for controlloing home electronics from iOS devices]
+
|-
+
| 0x1d50 || 0x6086 || [http://onerng.info/ OneRNG entropy device]
+
|-
+
| 0x1d50 || 0x6087 || [http://blinkinlabs.com/blinkytape Blinkytape (alternate USB endpoint config)]
+
|-
+
| 0x1d50 || 0x6088 || [https://github.com/m-ou-se/picp picp PIC16F145x based PIC16F145x programmer]
+
|-
+
| 0x1d50 || 0x6089 || [http://greatscottgadgets.com/hackrf/ HackRF One SDR]
+
|-
+
| 0x1d50 || 0x608a || [http://bleduino.cc BLEduino (Arduino-compatible BLE (Bluetooth 4.0) development board)]
+
|-
+
| 0x1d50 || 0x608b || [https://github.com/myriadrf/A2300 Loctronix ASR-2300 SDR/motion sensing module]
+
|-
+
| 0x1d50 || 0x608c || [http://sigrok.org/wiki/Fx2lafw Fx2lafw Open Source firmware for FX2 based logic analyzers]
+
|-
+
| 0x1d50 || 0x608d || [http://sigrok.org/wiki/Fx2lafw Fx2lafw Open Source firmware for FX2 based logic analyzers]
+
|-
+
| 0x1d50 || 0x608e || [http://sigrok.org/wiki/Fx2lafw Fx2lafw Open Source firmware for FX2 based logic analyzers]
+
|-
+
| 0x1d50 || 0x608f || [http://sigrok.org/wiki/Fx2lafw Fx2lafw Open Source firmware for FX2 based logic analyzers]
+
|-
+
| 0x1d50 || 0x6090 || [http://sigrok.org/wiki/Fx2lafw Fx2lafw Open Source firmware for FX2 based logic analyzers]
+
|-
+
| 0x1d50 || 0x6091 || [http://sigrok.org/wiki/Fx2lafw Fx2lafw Open Source firmware for FX2 based logic analyzers]
+
|-
+
| 0x1d50 || 0x6092 || [http://sigrok.org/wiki/Fx2lafw Fx2lafw Open Source firmware for FX2 based logic analyzers]
+
|-
+
| 0x1d50 || 0x6093 || [http://sigrok.org/wiki/Fx2lafw Fx2lafw Open Source firmware for FX2 based logic analyzers]
+
|-
+
| 0x1d50 || 0x6094 || [http://sigrok.org/wiki/Fx2lafw Fx2lafw Open Source firmware for FX2 based logic analyzers]
+
|-
+
| 0x1d50 || 0x6095 || [http://sigrok.org/wiki/Fx2lafw Fx2lafw Open Source firmware for FX2 based logic analyzers]
+
|-
+
| 0x1d50 || 0x6096 || [http://www.lightup.io LightUp (sketch)]
+
|-
+
| 0x1d50 || 0x6097 || [http://tessel.io/ Tessel JavaScript enabled Microcontroller with built-in WiFi]
+
|-
+
| 0x1d50 || 0x6098 || [http://www.kickstarter.com/projects/1708444109/rfidler-a-software-defined-rfid-reader-writer-emul RFIDler]
+
|-
+
| 0x1d50 || 0x6099 || [https://github.com/myriadrf/RASDR RASDR Radio Astronomy SDR Rx Interface]
+
|-
+
| 0x1d50 || 0x609a || [https://github.com/myriadrf/RASDR RASDR Radio Astronomy SDR Tx Interface]
+
|-
+
| 0x1d50 || 0x609b || [https://github.com/myriadrf/RASDR RASDR Radio Astronomy SDR Bootloader]
+
|-
+
| 0x1d50 || 0x609c || [https://github.com/Galvant/antiafk_firmware antiAFK keyboard]
+
|-
+
| 0x1d50 || 0x609d || [https://code.google.com/p/pic16f1454-bootloader/ PIC16F145x bootloader]
+
|-
+
| 0x1d50 || 0x609e || [https://github.com/fabule/Clyde Clyde Lamp by Fabule (bootloader)]
+
|-
+
| 0x1d50 || 0x609f || [https://github.com/fabule/Clyde Clyde Lamp by Fabule (sketch)]
+
|-
+
| 0x1d50 || 0x60a0 || [http://smoothieware.org/smoothiepanel Smoothiepanel robotic control interface]
+
|-
+
| 0x1d50 || 0x60a1 || [https://github.com/airspy/host Airspy]
+
|-
+
| 0x1d50 || 0x60a2 || [http://barebox.org barebox bootloader USB DFU (Device Firmware Upgrade) Mode]
+
|-
+
| 0x1d50 || 0x60a3 || [https://github.com/Galvant/antiAFK_firmware antiAFK keyboard (bootloader)]
+
|-
+
| 0x1d50 || 0x60a4 || Papilio Duo (AVR)
+
|-
+
| 0x1d50 || 0x60a5 || Papilio Duo (FPGA)
+
|-
+
| 0x1d50 || 0x60a6 || [https://github.com/bvernoux/hydrafw/wiki HydraBus/HydraNFC (bootloader)]
+
|-
+
| 0x1d50 || 0x60a7 || [https://github.com/bvernoux/hydrafw/wiki HydraBus/HydraNFC]
+
|-
+
| 0x1d50 || 0x60a8 || reserved
+
|-
+
| 0x1d50 || 0x60a9 || [https://github.com/blinkinlabs/blinkytile Blinky Light Controller (DFU bootloader)]
+
|-
+
| 0x1d50 || 0x60aa || [https://github.com/blinkinlabs/blinkytile Blinky Light Controller]
+
|-
+
| 0x1d50 || 0x60ab || [https://github.com/ManiacalLabs/AllPixel AllPixel USB control for major programmable LED strips]
+
|-
+
| 0x1d50 || 0x60ac || [http://feaser.com/openblt/doku.php OpenBLT generic microcontroller bootloader ]
+
|-
+
| 0x1d50 || 0x60ad || [https://github.com/gzip/eagle-usb-gamepad/ Clasic Gamepad USB Adapter (NES)]
+
|-
+
| 0x1d50 || 0x60ae || [https://github.com/gzip/eagle-usb-gamepad/ Clasic Gamepad USB Adapter (N64)]
+
|-
+
| 0x1d50 || 0x60af || [https://github.com/gzip/eagle-usb-gamepad/ Clasic Gamepad USB Adapter (DB9)]
+
|-
+
| 0x1d50 || 0x60b0 || [https://www.facebook.com/watterott.electronic/photos/a.211504945547854.54926.131472890217727/928577840507224 Waterott Arduino based Clock (caterina bootloader) ]
+
|-
+
| 0x1d50 || 0x60b1 || [https://github.com/felixekman/Drinkbot Drinkbot (processing)]
+
|-
+
| 0x1d50 || 0x60b2 || [https://github.com/felixekman/Drinkbot Drinkbot (OTG-tablet support)]
+
|-
+
| 0x1d50 || 0x60b3 || [https://calc.pw/ calc.pw password generator device (standard)]
+
|-
+
| 0x1d50 || 0x60b4 || [https://calc.pw/ calc.pw password generator device (enhanced)]
+
|-
+
| 0x1d50 || 0x60b5 || [http://code.timvideos.us/ TimVideos' HDMI2USB (FX2) - Unconfigured device]
+
|-
+
| 0x1d50 || 0x60b6 || [http://code.timvideos.us/ TimVideos' HDMI2USB (FX2) - Firmware load/upgrade]
+
|-
+
| 0x1d50 || 0x60b7 || [http://code.timvideos.us/ TimVideos' HDMI2USB (FX2) - HDMI/DVI Capture Device]
+
|-
+
| 0x1d50 || 0x60b8 || [http://code.timvideos.us/ TimVideos' HDMI2USB (Soft+UTMI) - Unconfigured device]
+
|-
+
| 0x1d50 || 0x60b9 || [http://code.timvideos.us/ TimVideos' HDMI2USB (Soft+UTMI) - Firmware upgrade]
+
|-
+
| 0x1d50 || 0x60ba || [http://code.timvideos.us/ TimVideos' HDMI2USB (Soft+UTMI) - HDMI/DVI Capture Device]
+
|-
+
| 0x1d50 || 0x60bc || [http://www.moonbaseotago.com/cheaprf/programmer1/programmer1.html Simple CC25xx programmer / serial board]
+
|-
+
| 0x1d50 || 0x60bd || [http://bhoreal.com/ Open Source control interface for multimedia applications]
+
|-
+
| 0x1d50 || 0x60be || [https://github.com/pixelmatix/aurora Pixelmatix Aurora (bootloader)]
+
|-
+
| 0x1d50 || 0x60bf || [https://github.com/pixelmatix/aurora Pixelmatix Aurora]
+
|-
+
| 0x1d50 || 0x60c0 || [https://github.com/thomask77/nucular-keyboard Nucular Keyboard USB-Adapter for older ThinkPad Keyboards]
+
|-
+
| 0x1d50 || 0x60c1 || [http://brewbit.com BrewBit Model-T pOSHW temperature controller for homebrewers (bootloader)]
+
|-
+
| 0x1d50 || 0x60c2 || [http://brewbit.com BrewBit Model-T pOSHW temperature controller for homebrewers]
+
|-
+
| 0x1d50 || 0x60c3 || [http://x-at.github.io/xat/2015/01/13/arduino-board.html X Antenna Tracker arduino board]
+
|-
+
| 0x1d50 || 0x60c4 || [https://github.com/CANtact/cantact-fw CAN bus USB communication device]
+
|-
+
| 0x1d50 || 0x60c5 || [https://github.com/74hc595/PIC16F1-USB-Bootloader PIC16F1 USB bootloader]
+
|-
+
| 0x1d50 || 0x60c6 || [http://altusmetrum.org/USBtrng/ USBtrng hardware random number generator]
+
|-
+
| 0x1d50 || 0x60c7 || [https://github.com/Zubax/zubax_gnss Zubax GNSS positioning module for light UAV systems]
+
|-
+
| 0x1d50 || 0x60c8 || [https://github.com/hbekel/xlink Xlink data transfer and control system for Commodore C64]
+
|-
+
| 0x1d50 || 0x60c9 || [https://github.com/alwynallan/redoubler random number generator]
+
|-
+
| 0x1d50 || 0x60ca || [https://github.com/DusteDdk/FinalKey FinalKey password manager]
+
|-
+
| 0x1d50 || 0x60cb || [https://bitbucket.org/abe_k/pterodaq PteroDAQ Data Acquisition on FRDM-KL25Z and future boards]
+
|-
+
| 0x1d50 || 0x60cc || [https://github.com/papcodientu/LamDiNao LamDiNao]
+
|-
+
| 0x1d50 || 0x60cd || [https://www.openlighting.org Open Lighting DMX512 / RDM USB widget]
+
|-
+
| 0x1d50 || 0x60de || [https://wiki.cryptech.is/browser/user/ft/stm32-avalanche-noise Cryptech.is random number generator]
+
|-
+
| 0x1d50 || 0x60df || [http://hdmi2usb.tv/numato-opsis Numato Opsis HDMI2USB board - unconfigured]
+
|-
+
| 0x1d50 || 0x60e0 || [http://hdmi2usb.tv/numato-opsis Numato Opsis HDMI2USB board - JTAG Programming Mode]
+
|-
+
| 0x1d50 || 0x60e1 || [http://hdmi2usb.tv/numato-opsis Numato Opsis HDMI2USB board - User Mode]
+
|-
+
| 0x1d50 || 0x60e2 || [http://simtrace.osmocom.org Osmocom SIMtrace 2 - DFU loader]
+
|-
+
| 0x1d50 || 0x60e3 || [http://simtrace.osmocom.org Osmocom SIMtrace 2 - Main Firmware]
+
|-
+
| 0x1d50 || 0x60e4 || [https://github.com/3DRacers 3D printed racing game - Catalina CDC bootloader]
+
|-
+
| 0x1d50 || 0x60e5 || [https://github.com/3DRacers 3D printed racing game - Application]
+
|-
+
| 0x1d50 || 0x60e6 || [https://github.com/greatscottgadgets/greatfet replacement for GoodFET/FaceDancer - GreatFet]
+
|-
+
| 0x1d50 || 0x60e7 || [https://github.com/greatscottgadgets/greatfet replacement for GoodFET/FaceDancer - GreatFet target]
+
|-
+
| 0x1d50 || 0x60e8 || [https://hackaday.io/project/8282-alpen-clack Alpen Clack keyboard]
+
|-
+
| 0x1d50 || 0x60e9 || [http://henning-bekel.de/keyman64 keyman64 keyboard itercepter]
+
|-
+
| 0x1d50 || 0x60ea || [https://github.com/scanlime/wiggleport/ Wiggleport FPGA-based I/O board]
+
|-
+
| 0x1d50 || 0x60eb || [https://github.com/HubertD/candleLight  candleLight CAN dongle] [https://github.com/HubertD/candleLight_gsusb firmware]
+
|-
+
| 0x1d50 || 0x60ec || [https://github.com/T3P3/Duet Duet 3D Printer Controller]
+
|-
+
| 0x1d50 || 0x60ed || (reserved 2016-07, followup 0x60ec)
+
|-
+
| 0x1d50 || 0x60ee || (reserved 2016-07, followup 0x60ec)
+
|-
+
| 0x1d50 || 0x60ef || (reserved 2016-07, followup 0x60ec)
+
|-
+
| 0x1d50 || 0x60f0 || [http://www.siphec.com/project/UDAD/ UDAD-T1 data aquisition device (boot)]
+
|-
+
| 0x1d50 || 0x60f1 || [http://www.siphec.com/project/UDAD/ UDAD-T1 data aquisition device]
+
|-
+
| 0x1d50 || 0x60f2 || [http://www.siphec.com/project/UDAD/ UDAD-T2 data aquisition device (boot)]
+
|-
+
| 0x1d50 || 0x60f3 || [http://www.siphec.com/project/UDAD/ UDAD-T2 data aquisition device]
+
|-
+
| 0x1d50 || 0x60f4 || [https://gitlab.com/uniti-arc/ Uniti ARC motor controller]
+
|-
+
| 0x1d50 || 0x60f5 || [https://github.com/Blinkinlabs/EightByEight EightByEight Blinky Badge (DFU)]
+
|-
+
| 0x1d50 || 0x60f6 || [https://github.com/Blinkinlabs/EightByEight EightByEight Blinky Badge]
+
|-
+
| 0x1d50 || 0x60f7 || [http://cgit.jvnv.net/cardio/ cardio NFC/RFID card reader (bootloader)]
+
|-
+
| 0x1d50 || 0x60f8 || [http://cgit.jvnv.net/cardio/ cardio NFC/RFID card reader]
+
|-
+
| 0x1d50 || 0x60fc || [https://www.cryptotrust.net/products.html OnlyKey Two-factor Authentication & Password Solution]
+
|-
+
| 0x1d50  || 0x6100 || [https://github.com/hbekel/overlay64 overlay64 video overlay module]
+
|-
+
| 0x1d50  || 0x6104 || [http://www.scopefun.com/ ScopeFun open source instrumentation]
+
|-
+
| 0x1d50  || 0x6108 || [https://myriadrf.org/projects/limesdr/ Myriad-RF LimeSDR-USB]
+
|-
+
| 0x1d50  || 0x610c || [https://github.com/jaretburkett/MagicKeys Magic Keys (boot)]
+
|-
+
| 0x1d50  || 0x610d || [https://github.com/jaretburkett/MagicKeys Magic Keys]
+
|-
+
| 0x1d50  || 0x6110 || reserved for Watterott till January/February 2017
+
|-
+
| 0x1d50  || 0x6114 || [https://github.com/UA3MQJ/usb-midi-key MIDI key]
+
|-
+
| 0x1d50  || 0x6118 || [https://github.com/hadess/retro-keyboard Thomson MO5 USB keyboard]
+
|-
+
| 0x1d50  || 0x611c || [https://github.com/rrevans/ubaboot rrevans ubaboot]
+
|-
+
| 0x1d50  || 0x6120 || [https://github.com/UltimateHackingKeyboard UltimateHackingKeyboard]
+
|-
+
| 0x1d50  || 0x6128 || [https://github.com/Zanith/PSoC-Electrochemical-Device Zanith PSoC-Electrochemical-Device 1]
+
|-
+
| 0x1d50  || 0x612c || [https://github.com/Zanith/PSoC-Electrochemical-Device Zanith PSoC-Electrochemical-Device 2]
+
|-
+
| 0x1d50  || 0x6130 || [https://github.com/tinyfpga/TinyFPGA-Bootloader TinyFPGA Bootloader]
+
|-
+
|' 0x1d50  ||  || ''0x1d50 0x???(0/4/8/c) #########- insert next record here -#########'''  *R!*
+
|-
+
| 0x1d50 || 0x8085 || [http://madresistor.org/box0/ Box0 (box0-v5) - Free/Open source tool for exploring science and electronics]
+
|-
+
| 0x1d50 || 0xCC15 || [https://rad1o.badge.events.ccc.de/ rad1o badge for CCC congress 2015]
+
|}
+
  
 
The above mentioned IDs have been submitted for inclusion into the http://www.linux-usb.org/usb.ids list.
 
The above mentioned IDs have been submitted for inclusion into the http://www.linux-usb.org/usb.ids list.

Latest revision as of 09:17, 9 June 2018

Contents

[edit] USB Vendor and Product IDs

[edit] Open registry for community / homebrew USB Product IDs

Do not apply before your project is published under a FOSS license!

As the openmoko products have been discontinued, Openmoko Inc. is opening up the use of its Vendor ID for use by the Free and Open Source software and hardware communities. This means you can simply register your devices and will get an allocation of a Product ID for free.

Do not apply before your project is published under a FOSS license!

[edit] Conditions

Do not apply before your project is published under a FOSS license!

By applying for an Openmoko Product ID, you acknowledge that either

  • the USB device you are developing is either an open hardware project (as per the OSHW Definition), or
  • the firmware/software running on your USB device is Free / Open Source software, licensed under an OSI-Approved, FSF-Recognized or DFSG-Approved Free / Open Source software license

Do not apply before your project is published under a FOSS license!

In order to request a product ID, please send an e-mail to usb-id@openmoko.org including

  • the string "request" somewhere in the subject
  • a name and short description of your usb device project
  • the license under which you are releasing the hardware and/or software/firmware of the device
  • a link to the project website and/or source code repository, if any
  • a terse descriptive string for each ID you want, according to the examples below (field#3 in table). This string will show up in tools like `lsusb` etc and should avoid to use "USB" to describe what the device is/does, since those tools are implicitly about USB already. (bad: "USB keyboard", less bad: "Joe's USB-RS232 adapter" (established term in one word), BEST: "ACME1 secure mass storage device, type 512")
  • if you (might) need multiple Product IDs, please indicate + explain this at the first message, rather than applying for a second ID later
  • If you later decide to apply for a PID elsewhere, you must send us a cancellation mail to avoid collisions, duplicating and other issues. We normally respond to requests within 2 weeks, sometimes it can take up to a month.

Feel free to also contact us on IRC, #openmoko channel on Freenode.

Do not apply before your project is published under a FOSS license!

[edit] Assigned/Allocated Openmoko USB Product IDs

Openmoko is using the USB Vendor and Product IDs below. Note that 0x1457 is the Vendor ID of FIC, Inc, and 0x1d50 is the vendor ID of Openmoko, Inc.

The current list of allocations can be found at https://raw.githubusercontent.com/openmoko/openmoko-usb-oui/master/usb_product_ids.psv

The above mentioned IDs have been submitted for inclusion into the http://www.linux-usb.org/usb.ids list.

The strings "reserved"|"Reserved"|"*R!*" tag records not to get included in any updates sent upstream. They must not show up in any other record.

The sequences "/*" and "//" denote start of comment (until EOL) in 3rd field which will not get included to the usb.ids file, any patch should filter out those comments

Groups of IDs (>=1) for one entity or project should get assigned starting at 0x???(0|4|8|c) and allow for a sufficient number (3, for prospective larger projects 7 or 15) of consecutive available free IDs for the previous project to grow.


Personal tools

USB Vendor and Product IDs

Open registry for community / homebrew USB Product IDs

Do not apply before your project is published under a FOSS license!

As the openmoko products have been discontinued, Openmoko Inc. is opening up the use of its Vendor ID for use by the Free and Open Source software and hardware communities. This means you can simply register your devices and will get an allocation of a Product ID for free.

Do not apply before your project is published under a FOSS license!

Conditions

Do not apply before your project is published under a FOSS license!

By applying for an Openmoko Product ID, you acknowledge that either

  • the USB device you are developing is either an open hardware project (as per the OSHW Definition), or
  • the firmware/software running on your USB device is Free / Open Source software, licensed under an OSI-Approved, FSF-Recognized or DFSG-Approved Free / Open Source software license

Do not apply before your project is published under a FOSS license!

In order to request a product ID, please send an e-mail to usb-id@openmoko.org including

  • the string "request" somewhere in the subject
  • a name and short description of your usb device project
  • the license under which you are releasing the hardware and/or software/firmware of the device
  • a link to the project website and/or source code repository, if any
  • a terse descriptive string for each ID you want, according to the examples below (field#3 in table). This string will show up in tools like `lsusb` etc and should avoid to use "USB" to describe what the device is/does, since those tools are implicitly about USB already. (bad: "USB keyboard", less bad: "Joe's USB-RS232 adapter" (established term in one word), BEST: "ACME1 secure mass storage device, type 512")
  • if you (might) need multiple Product IDs, please indicate + explain this at the first message, rather than applying for a second ID later
  • If you later decide to apply for a PID elsewhere, you must send us a cancellation mail to avoid collisions, duplicating and other issues. We normally respond to requests within 2 weeks, sometimes it can take up to a month.

Feel free to also contact us on IRC, #openmoko channel on Freenode.

Do not apply before your project is published under a FOSS license!

Assigned/Allocated Openmoko USB Product IDs

Openmoko is using the USB Vendor and Product IDs below. Note that 0x1457 is the Vendor ID of FIC, Inc, and 0x1d50 is the vendor ID of Openmoko, Inc.

The current list of allocations can be found at https://raw.githubusercontent.com/openmoko/openmoko-usb-oui/master/usb_product_ids.psv

The above mentioned IDs have been submitted for inclusion into the http://www.linux-usb.org/usb.ids list.

The strings "reserved"|"Reserved"|"*R!*" tag records not to get included in any updates sent upstream. They must not show up in any other record.

The sequences "/*" and "//" denote start of comment (until EOL) in 3rd field which will not get included to the usb.ids file, any patch should filter out those comments

Groups of IDs (>=1) for one entity or project should get assigned starting at 0x???(0|4|8|c) and allow for a sufficient number (3, for prospective larger projects 7 or 15) of consecutive available free IDs for the previous project to grow.