Qtopia on Neo1973

Revision as of 02:47, 19 September 2007

It appears you must clear the flash chunks first. Get into uboot console [1] and enter

# nand erase kernel
# nand erase rootfs

You can get everything you need from here download and use dfu-util as normal [2] :D - Simple, Eh?

Most things seem to work out of the box, however you may need to use the following command to get audio:

# alsactl -f /etc/alsa/gsmhandset.state restore

The lock works, yet you must push the power button, then press the # on the smallest 9-keypad in the world.

Here are some screenshots of Qtopia runing on a Neo 1973. Personally I find it very impressive...

http://www.youtube.com/watch?v=YW5q8SpY7t4
http://www.youtube.com/watch?v=iOG_mtSEMgs

@@ Line 1: / Line 1: @@
 == Where to get  it ==
-You can get everything you need [http://www.qtopia.net/modules/devices/openmoko.php from here] download and use dfu-util as normal :D - Simple, Eh?
+It appears you must clear the flash chunks first. Get into uboot console [http://wiki.openmoko.org/wiki/Uboot#Accessing_the_bootloader_prompt] and enter
+ # nand erase kernel
+ # nand erase rootfs
+You can get everything you need [http://www.qtopia.net/modules/devices/openmoko.php from here] download and use dfu-util as normal [http://wiki.openmoko.org/wiki/Flashing_openmoko] :D - Simple, Eh?
 Most things seem to work out of the box, however you may need to use the following command to get audio:
   # alsactl -f /etc/alsa/gsmhandset.state restore
+The lock works, yet you must push the power button, then press the # on the smallest 9-keypad in the world.
 == Screenshots ==