View source for Neo 1973 OpenOCD
From Openmoko
You do not have permission to edit this page, for the following reasons:
You can view and copy the source of this page:
Template used on this page:
Return to Neo 1973 OpenOCD.
You do not have permission to edit this page, for the following reasons:
You can view and copy the source of this page:
Template used on this page:
Return to Neo 1973 OpenOCD.
OpenOCD is a 100% free software On-chip-debugger for commonly-found ARM JTAG probes such as wiggler, chamaeleon, jtag-key and others.
It provides a human-readable telnet interface for manually halting/resuming the target device, reading/writing registers and memory, etc.
In addition, it provides a RDI (remote debugger interface) on a TCP port. This interface can be used by gdb (the GNU Debugger).
The GTA01 development team uses OpenOCD with a wiggler compatible probe as their ICE solution.
OpenOCD Revision 82 has been proven to work with our QT2410 target board and wiggler. You can check rev. 82 out of the OpenOCD subversion via
svn co -r 82 http://svn.berlios.de/svnroot/repos/openocd/trunk
User:HaraldWelte has provided a openocd.cfg configuration file for use of OpenOCD with wiggler and the QT2410 target board.
Ju
This has been reported upstream. Bugfix pending.