Nand erase

From Openmoko

Revision as of 16:18, 13 August 2007 by DanielRuoso (Talk | contribs)

Jump to: navigation, search

To make a NAND erase, you need to connect to your device while in uboot using minicom or cu. The device will usually be called /dev/ttyACM0.

After connecting, you should get a prompt, where you can write:

  1. nand erase clean rootfs
Retrieved from "http://openmoko.org/index.php?title=Nand_erase&oldid=16697"
Personal tools

To make a NAND erase, you need to connect to your device while in uboot using minicom or cu. The device will usually be called /dev/ttyACM0.

After connecting, you should get a prompt, where you can write:

  1. nand erase clean rootfs