Nand erase
From Openmoko
(Difference between revisions)
m (chown uucp.uucp /dev/ttyACM0 => sudo chown uucp.uucp /dev/ttyACM0) |
|||
| Line 1: | Line 1: | ||
To make a NAND erase, you need to connect to your device while in uboot using minicom or cu. The device will usually be called /dev/ttyACM0. You might need to | To make a NAND erase, you need to connect to your device while in uboot using minicom or cu. The device will usually be called /dev/ttyACM0. You might need to | ||
| − | + | sudo chown uucp.uucp /dev/ttyACM0 | |
to get the necessary right (even as root). Using cu, you can then access the Neo: | to get the necessary right (even as root). Using cu, you can then access the Neo: | ||
Revision as of 20:18, 18 September 2007
To make a NAND erase, you need to connect to your device while in uboot using minicom or cu. The device will usually be called /dev/ttyACM0. You might need to
sudo chown uucp.uucp /dev/ttyACM0
to get the necessary right (even as root). Using cu, you can then access the Neo:
cu -l /dev/ttyACM0
After connecting, you should get a prompt, where you can write:
- nand erase clean rootfs
- nand erase clean kernel
