View source for Nand erase

From Openmoko

Jump to: navigation, search

You do not have permission to edit this page, for the following reasons:

  • The action you have requested is limited to users in the group: Administrators.
  • You must confirm your email address before editing pages. Please set and validate your email address through your user preferences.

You can view and copy the source of this page:

Template used on this page:

Return to Nand erase.

Retrieved from "http://openmoko.org/wiki/Nand_erase"
Personal tools

To make a NAND erase, you need to connect to your device while in uboot using minicom or cu. The device will usually be called /dev/ttyACM0. You might need to 

chown uucp.uucp /dev/ttyACM0

to get the necessary right (even as root). Using cu, you can then access the Neo: 

cu -l /dev/ttyACM0

After connecting, you should get a prompt, where you can write:

  1. nand erase clean rootfs
  2. nand erase clean kernel