View source for Manually using GSM

From Openmoko

Jump to: navigation, search

You do not have permission to edit this page, for the following reasons:

  • The action you have requested is limited to users in the group: Administrators.
  • You must confirm your email address before editing pages. Please set and validate your email address through your user preferences.

You can view and copy the source of this page:

Templates used on this page:

Return to Manually using GSM.

Retrieved from "http://openmoko.org/wiki/Manually_using_GSM"
Personal tools

When men were real men and typed their own AT commands...

Thankfully, this may now be partially obsolete. The dialer now works!

This is a short guide how to manually get GSM going.

Requirements

  • GTA01Bv2 or GTA01Bv3 with very recent u-boot bootloader, providing usbtty (serial over USB) support)
  • Do not connect any debug board!

Walk-Through

Booting the system

  • Make sure the rootfs you use has 'auto usb0' in /etc/network/interfaces
  • Configure the host's usb0 interface to 192.168.0.200 netmask 255.255.255.0
  • ssh to root@192.168.0.201

Disabling the getty

Our default images all have a getty running on /dev/ttySAC0, please edit /etc/inittab and disable the getty on that port

Reducing the loglevel

{{note|You don't need this in kernel builds with patchset