Flashing the Neo FreeRunner

From Openmoko

(Difference between revisions)
Jump to: navigation, search
(Download the image files that you will need: URLs removed, pointing to Downloads instead, that has complete list, not a random selection.)
m (Download the DFU-util program: Removed unnecessary repeats of "you can download it for this os here" 3 times (easier to read).)
Line 34: Line 34:
 
=== Download the DFU-util program ===
 
=== Download the DFU-util program ===
  
You will download that program on your preferred desktop computer. It will allow you to connect to the FreeRunner through the USB cable and control its bootloader. That connection uses a special protocol which addresses the bootloader's interface, and differs from USB networking.
+
You will download that program on your desktop computer. It will allow you to connect to the FreeRunner through the USB cable and control its bootloader. That connection uses a special protocol which addresses the bootloader's interface, and differs from USB networking. There is a separate page to describe it in more detail: [[dfu-util]].
  
There are versions of dfu-util for both Linux and Windows. It works the same way on both platforms.
+
'''MacOS X:''' [[MacOS_X#Graphical_Flashing_with_Openmoko_Flasher]]
There is a separate page to describe it in more detail: [[dfu-util]]
+
  
'''MacOS X'''
+
'''Linux:''' http://buildhost.openmoko.org/releases/Freerunner/dfu-util
 
+
There is also a graphical dfu-util based flashing utility for MacOS X which is described here: [[MacOS_X#Graphical_Flashing_with_Openmoko_Flasher]]
+
 
+
'''Linux'''
+
You can download the flashing tool for a GNU/Linux host from:
+
http://buildhost.openmoko.org/releases/Freerunner/dfu-util
+
  
 
Make sure it is executable by setting the permissions with this command: chmod a+x dfu-util
 
Make sure it is executable by setting the permissions with this command: chmod a+x dfu-util
  
'''Windows'''
+
'''Windows:''' http://projects.openmoko.org/frs/?group_id=166&release_id=162  
You can download the flashing tool for a Windows host from:
+
[http://projects.openmoko.org/frs/?group_id=166&release_id=162 http://projects.openmoko.org/frs/?group_id=166&release_id=162]
+
  
 
See additional driver installation instructions for Windows at [[Dfu-util-windows]]
 
See additional driver installation instructions for Windows at [[Dfu-util-windows]]

Revision as of 23:02, 8 August 2008

Openmoko regularly releases updated versions of the Openmoko root filesystem, the kernel, and the U-Boot as binary images. These may be programmed into the Flash memory (NAND) of Neo FreeRunner. For that, you can use the USB cable and another computer which will run an Openmoko provided tool to flash the Neo FreeRunner "through" USB.

NOTE: The Openmoko software team builds images daily. If you want to use the latest images, you can download the image from the daily build, but we recommend you use the most stable image from http://buildhost.openmoko.org/releases/Freerunner/. Images here have been tested by the test team.


Contents

Overview

All the components of the software in the FreeRunner are bundled together into binary images.

The bootloader is a small program that runs first when the FreeRunner is powered on or reset (depending on how you reset it, the version from NOR or NAND is booted). The kernel is the central component in the Linux operating system. The root filesystem contains all the files that make up the commands and applications that you can run.

On a desktop computer when you want to replace the operating system, you would boot it from a CD-ROM drive, then copy files from the CD to the internal hard drive.

The FreeRunner does not have a CD-ROM drive but it does have two kinds of internal program storage: NOR flash and NAND flash. The NOR flash is small and stores only a special boot program used when you need to re-write the contents of the NAND flash. NAND flash acts more like a hard drive.

The NAND Flash is divided into 3 partitions so that you can flash each component separately. For example if you are trying to install a modified kernel, you only have to follow the steps to flash the kernel image.

The FreeRunner can also boot from an image in its micro SD card but that option is not covered here. See Booting from SD for more information.

Before you start: Erasing the root filesystem or flashing the uboot are radical measures. Take the time to ponder the necessity. Sometimes problems can be fixed by updating only the kernel.

The steps to reflash NAND are

  1. Collect everything you need together on your desktop computer. This includes the dfu-util program and the images you will load into the FreeRunner and a USB cable.
  2. Boot the FreeRunner from NOR Flash.
  3. Connect the FreeRunner to the desktop computer via the USB cable.
  4. Use dfu-util to backup the current contents of the FreeRunner.
  5. Use dfu-util to copy the images from the desktop into the FreeRunner.
  6. Boot the FreeRunner from NAND Flash to use the new image(s).

Collect the things you need

Download the DFU-util program

You will download that program on your desktop computer. It will allow you to connect to the FreeRunner through the USB cable and control its bootloader. That connection uses a special protocol which addresses the bootloader's interface, and differs from USB networking. There is a separate page to describe it in more detail: dfu-util.

MacOS X: MacOS_X#Graphical_Flashing_with_Openmoko_Flasher

Linux: http://buildhost.openmoko.org/releases/Freerunner/dfu-util

Make sure it is executable by setting the permissions with this command: chmod a+x dfu-util

Windows: http://projects.openmoko.org/frs/?group_id=166&release_id=162

See additional driver installation instructions for Windows at Dfu-util-windows

Download the image files that you will need

Exactly what files you need depends on what you are trying to install. In most cases you will need to install a Kernel and a Root Filesystem (rootfs). In rare cases, when there is a bug you need fixed, you will also install a new bootloader.

Please read Distributions for choosing the distribution which fits your needs, and then see Download for downloading.

Boot the FreeRunner from NOR Flash

Booting from NOR Flash

The Neo FreeRunner needs to be at the NOR uBoot menu for flashing. To get there. 1. press and hold aux button down, and then 2. press power button until the boot process starts. (For more information on booting, see booting the Neo Freerunner)

Once you see the NOR uBoot menu (labelled *** BOOT MENU (NOR) ***) just stay there, you do not need to select or enter any item in menu. Now you will be able to flash, make backups of your Freerunner or query the Freerunner with dfu-util.

We often hear this comment: The screen goes dark before I do anything!! The FreeRunner only stays at the NOR boot prompt for about 30 seconds and then shuts off unless you do something. Be sure you are ready to enter commands on your desktop once you have booted.

Once the FreeRunner is at the NOR boot menu, then you can connect your Neo to the GNU/Linux or Windows host via a USB cable. If you have to boot back into NOR at this point (because you did not type fast enough!), pull the USB cable out first. Otherwise you will end up booting into the regular FreeRunner operating system. Got that? This is the routine:

  1. boot into NOR
  2. connect usb
  3. type dfu-util commands

Note that the dfu-util connection does not use Ethernet over USB - that is, you should not attempt to set up a usb0 network interface on your GNU/Linux host desktop (on Windows, you need a DFU class driver, or you can use the LibUSB-Win32 driver described on the Dfu-util-windows page). The dfu-util utility sets up its own connection to the FreeRunner. In fact, you will not be able to make an Ethernet-over-USB connection to the FreeRunner when it is at the uBoot menu; this type of connection is only available when the FreeRunner has booted fully.

After connecting the FreeRunner to your host via USB cable, you can test whether dfu-util "sees" the FreeRunner by executing:

  dfu-util -l

Sometimes I get error messages from the dfu-util command; I just try again. Often they work on the second try. Sometimes I have to boot into NOR again before things work. Once a connection has been made everything seems to work fine.

Do a backup

If you have a working image that you're happy with but want to try something different, you should probably do a Pre-Flash Backup, although it looks like the method on that page may not entirely work.

Is this still true? 7/31/08??

Using dfu-util

dfu-util can be used to read flash memory, write memory, and get information from the device.

This is the general command format to write an image file to a (predefined) "partition name" (referred to as altsetting in dfu-util help/manual) :

dfu-util -a altsetting -R -D file_name

where:
-a altsetting : Specify the altsetting of the DFU interface by name or by number
-R  : Issue USB Reset signalling once we're finished
-D file_name : Write firmware from file_name into device

On Linux, you run dfu-util from a command shell prompt. If you have not put it somewhere on your command path you probably need to prefix it with a "./" like this ./dfu-util. On some systems you need to be root before this will work and on Ubuntu you must preface the command with "sudo" or you will get the following error: "Cannot claim interface: could not claim interface 2: Operation not permitted"

On Windows, you need to open a command window and run from a command line. Use Start-Run Program and type "cmd" to open a Window.

Flashing the Kernel

The command format is

dfu-util -a kernel -R -D /path/to/uImage

When flashing succeeds the following will be shown:

status(0) = No error condition is present
Done!

Flashing the Root Filesystem

The root filesystem has to be an image in jffs2 format. If the file you downloaded is zipped or compressed (has a .gz or .zip extension) you have to uncompress it first.

The command format is

dfu-util -a rootfs -R -D rootfs_filename.jffs2

where rootfs_filename.jffs2 is the name of the file containing the root filesystem.

When flashing succeeds the following will be shown:

status(0) = No error condition is present
Done!

Flashing the boot loader to the NAND

The boot loader (U-boot) file should have a .bin extension. As with the root filesystem, if the file you downloaded is zipped or compressed (has a .gz or .zip extension) you have to uncompress it first.

The command format is

dfu-util -a u-boot -R -D uboot.bin

where uboot.bin is the name of the boot loader binary image file.

Reminder: You should have rebooted from NOR first, in order to flash the boot-loader in NAND. After flashing succesfully, make sure you reboot from NAND's newly flashed boot loader, to benefit from the updates.

(Optional) After an upgrade, you may wish to check that the u-boot version matches the one you have just flashed. You can use 'grep Bootloader /dev/mtdblock1' from a shell on the FreeRunner (and possibly the 1973 as well) to get the NAND u-boot version, like this:

  root@om-gta02:~# grep Bootloader /dev/mtdblock1
  Neo1973 Bootloader U-Boot 1.3.2+gitr18+64eb10cab8055084ae25ea4e73b66dd03cc1a0cb

You can grep for the same string in /dev/mtdblock0 to retrieve the NOR u-boot version:

  root@om-gta02:~# grep  Bootloader /dev/mtdblock0
  Neo1973 Bootloader U-Boot 1.3.2-moko12


Reboot the FreeRunner from NAND

You should now be able to boot into the new images.

Pay attention to booting from the NAND flash this time, in particular if you upgraded the boot-loader (in short: 1. press and hold power button down, and then 2. press aux button)

The boot menu should be labelled *** BOOT MENU (NAND) *** this time (see booting from NAND for more detailed instructions).

Personal tools

Openmoko regularly releases updated versions of the Openmoko root filesystem, the kernel, and the U-Boot as binary images. These may be programmed into the Flash memory (NAND) of Neo FreeRunner. For that, you can use the USB cable and another computer which will run an Openmoko provided tool to flash the Neo FreeRunner "through" USB.

NOTE: The Openmoko software team builds images daily. If you want to use the latest images, you can download the image from the daily build, but we recommend you use the most stable image from http://buildhost.openmoko.org/releases/Freerunner/. Images here have been tested by the test team.


Overview

All the components of the software in the FreeRunner are bundled together into binary images.

The bootloader is a small program that runs first when the FreeRunner is powered on or reset (depending on how you reset it, the version from NOR or NAND is booted). The kernel is the central component in the Linux operating system. The root filesystem contains all the files that make up the commands and applications that you can run.

On a desktop computer when you want to replace the operating system, you would boot it from a CD-ROM drive, then copy files from the CD to the internal hard drive.

The FreeRunner does not have a CD-ROM drive but it does have two kinds of internal program storage: NOR flash and NAND flash. The NOR flash is small and stores only a special boot program used when you need to re-write the contents of the NAND flash. NAND flash acts more like a hard drive.

The NAND Flash is divided into 3 partitions so that you can flash each component separately. For example if you are trying to install a modified kernel, you only have to follow the steps to flash the kernel image.

The FreeRunner can also boot from an image in its micro SD card but that option is not covered here. See Booting from SD for more information.

Before you start: Erasing the root filesystem or flashing the uboot are radical measures. Take the time to ponder the necessity. Sometimes problems can be fixed by updating only the kernel.

The steps to reflash NAND are

  1. Collect everything you need together on your desktop computer. This includes the dfu-util program and the images you will load into the FreeRunner and a USB cable.
  2. Boot the FreeRunner from NOR Flash.
  3. Connect the FreeRunner to the desktop computer via the USB cable.
  4. Use dfu-util to backup the current contents of the FreeRunner.
  5. Use dfu-util to copy the images from the desktop into the FreeRunner.
  6. Boot the FreeRunner from NAND Flash to use the new image(s).

Collect the things you need

Download the DFU-util program

You will download that program on your desktop computer. It will allow you to connect to the FreeRunner through the USB cable and control its bootloader. That connection uses a special protocol which addresses the bootloader's interface, and differs from USB networking. There is a separate page to describe it in more detail: dfu-util.

MacOS X: MacOS_X#Graphical_Flashing_with_Openmoko_Flasher

Linux: http://buildhost.openmoko.org/releases/Freerunner/dfu-util

Make sure it is executable by setting the permissions with this command: chmod a+x dfu-util

Windows: http://projects.openmoko.org/frs/?group_id=166&release_id=162

See additional driver installation instructions for Windows at Dfu-util-windows

Download the image files that you will need

Exactly what files you need depends on what you are trying to install. In most cases you will need to install a Kernel and a Root Filesystem (rootfs). In rare cases, when there is a bug you need fixed, you will also install a new bootloader.

Please read Distributions for choosing the distribution which fits your needs, and then see Download for downloading.

Boot the FreeRunner from NOR Flash

Booting from NOR Flash

The Neo FreeRunner needs to be at the NOR uBoot menu for flashing. To get there. 1. press and hold aux button down, and then 2. press power button until the boot process starts. (For more information on booting, see booting the Neo Freerunner)

Once you see the NOR uBoot menu (labelled *** BOOT MENU (NOR) ***) just stay there, you do not need to select or enter any item in menu. Now you will be able to flash, make backups of your Freerunner or query the Freerunner with dfu-util.

We often hear this comment: The screen goes dark before I do anything!! The FreeRunner only stays at the NOR boot prompt for about 30 seconds and then shuts off unless you do something. Be sure you are ready to enter commands on your desktop once you have booted.

Once the FreeRunner is at the NOR boot menu, then you can connect your Neo to the GNU/Linux or Windows host via a USB cable. If you have to boot back into NOR at this point (because you did not type fast enough!), pull the USB cable out first. Otherwise you will end up booting into the regular FreeRunner operating system. Got that? This is the routine:

  1. boot into NOR
  2. connect usb
  3. type dfu-util commands

Note that the dfu-util connection does not use Ethernet over USB - that is, you should not attempt to set up a usb0 network interface on your GNU/Linux host desktop (on Windows, you need a DFU class driver, or you can use the LibUSB-Win32 driver described on the Dfu-util-windows page). The dfu-util utility sets up its own connection to the FreeRunner. In fact, you will not be able to make an Ethernet-over-USB connection to the FreeRunner when it is at the uBoot menu; this type of connection is only available when the FreeRunner has booted fully.

After connecting the FreeRunner to your host via USB cable, you can test whether dfu-util "sees" the FreeRunner by executing:

  dfu-util -l

Sometimes I get error messages from the dfu-util command; I just try again. Often they work on the second try. Sometimes I have to boot into NOR again before things work. Once a connection has been made everything seems to work fine.

Do a backup

If you have a working image that you're happy with but want to try something different, you should probably do a Pre-Flash Backup, although it looks like the method on that page may not entirely work.

Is this still true? 7/31/08??

Using dfu-util

dfu-util can be used to read flash memory, write memory, and get information from the device.

This is the general command format to write an image file to a (predefined) "partition name" (referred to as altsetting in dfu-util help/manual) :

dfu-util -a altsetting -R -D file_name

where:
-a altsetting : Specify the altsetting of the DFU interface by name or by number
-R  : Issue USB Reset signalling once we're finished
-D file_name : Write firmware from file_name into device

On Linux, you run dfu-util from a command shell prompt. If you have not put it somewhere on your command path you probably need to prefix it with a "./" like this ./dfu-util. On some systems you need to be root before this will work and on Ubuntu you must preface the command with "sudo" or you will get the following error: "Cannot claim interface: could not claim interface 2: Operation not permitted"

On Windows, you need to open a command window and run from a command line. Use Start-Run Program and type "cmd" to open a Window.

Flashing the Kernel

The command format is

dfu-util -a kernel -R -D /path/to/uImage

When flashing succeeds the following will be shown:

status(0) = No error condition is present
Done!

Flashing the Root Filesystem

The root filesystem has to be an image in jffs2 format. If the file you downloaded is zipped or compressed (has a .gz or .zip extension) you have to uncompress it first.

The command format is

dfu-util -a rootfs -R -D rootfs_filename.jffs2

where rootfs_filename.jffs2 is the name of the file containing the root filesystem.

When flashing succeeds the following will be shown:

status(0) = No error condition is present
Done!

Flashing the boot loader to the NAND

The boot loader (U-boot) file should have a .bin extension. As with the root filesystem, if the file you downloaded is zipped or compressed (has a .gz or .zip extension) you have to uncompress it first.

The command format is

dfu-util -a u-boot -R -D uboot.bin

where uboot.bin is the name of the boot loader binary image file.

Reminder: You should have rebooted from NOR first, in order to flash the boot-loader in NAND. After flashing succesfully, make sure you reboot from NAND's newly flashed boot loader, to benefit from the updates.

(Optional) After an upgrade, you may wish to check that the u-boot version matches the one you have just flashed. You can use 'grep Bootloader /dev/mtdblock1' from a shell on the FreeRunner (and possibly the 1973 as well) to get the NAND u-boot version, like this:

  root@om-gta02:~# grep Bootloader /dev/mtdblock1
  Neo1973 Bootloader U-Boot 1.3.2+gitr18+64eb10cab8055084ae25ea4e73b66dd03cc1a0cb

You can grep for the same string in /dev/mtdblock0 to retrieve the NOR u-boot version:

  root@om-gta02:~# grep  Bootloader /dev/mtdblock0
  Neo1973 Bootloader U-Boot 1.3.2-moko12


Reboot the FreeRunner from NAND

You should now be able to boot into the new images.

Pay attention to booting from the NAND flash this time, in particular if you upgraded the boot-loader (in short: 1. press and hold power button down, and then 2. press aux button)

The boot menu should be labelled *** BOOT MENU (NAND) *** this time (see booting from NAND for more detailed instructions).