Getting Started with your Neo FreeRunner
From Openmoko
Line 138: | Line 138: | ||
Type in the following command in the terminal of a GNU/Linux host. | Type in the following command in the terminal of a GNU/Linux host. | ||
+ | ./dfu-util -a (partion name) -R -D (download image file name) | ||
− | ./dfu-util -a kernel -R -D uImage-2.6.24+svnr4082-r4055-r3-neo1973.bin | + | |
+ | ex: | ||
+ | |||
+ | ./dfu-util -a kernel -R -D uImage-2.6.24+svnr4082-r4055-r3-neo1973.bin(downloaded Image file name ) | ||
When flashing succeeds | When flashing succeeds | ||
Line 146: | Line 150: | ||
Done! | Done! | ||
− | + | {{note| The meaning of parameter you spcified: | |
+ | -a the partition name<br> | ||
+ | -R reset USB<br> | ||
+ | -D specify image's file name<br> | ||
+ | }} | ||
====Flashing Root Filesystem==== | ====Flashing Root Filesystem==== |
Revision as of 06:29, 13 June 2008
Languages: |
English • العربية • Български • Česky • Dansk • Deutsch • Esperanto • Eesti • Español • فارسی • Suomi • Français • עברית • Magyar • Italiano • 한국어 • Nederlands • Norsk (bokmål) • Polski • Português • Română • Русский • Svenska • Slovenčina • Українська • 中文(中国大陆) • 中文(台灣) • Euskara • Català |
Thank you for purchasing this Developer release of Neo FreeRunner. The Neo FreeRunner phone is the second hardware platform to take advantage of Openmoko. This guide will help you know your Neo FreeRunner and how to starte use your Neo FreeRunner. |
---|
Contents
What Is In The Box
Getting To Know Neo FreeRunner
Turning On Neo FreeRunner
You can boot your Neo FreeRunner in following ways:
- Boot into U-Boot via NAND Flash.
These ways allows you to update the kernel and root filesystem.
Log in Openmoko Image
Press and hold Power button (about 8 seconds) until Openmoko splash screen turns up. You may now release the Power button, and Neo FreeRunner will continue to boot into Openmoko Image. |
Log in U-Boot in NAND Flash
Press and hold Power button, then press and hold AUX button (about 5~8 seconds ). You can see BOOT MENU for NAND Flash. Press AUX to select the options, Power to execute. |
Log in U-Boot in NOR Flash
Press and hold AUX button, then press and hold Power button. Release AUX button. You can see BOOT MENU for NOR Flash. ( This options usually used for developer. If you can't log in NAND , you can log in U-Boot in NOR Flash. ) |
NOTE: There are six options you can choose when you log in NOR Flash.
1. Boot 3. Set console to USB 4. Set console to Serial 5. Reset 6. Power off
|
Flashing Neo FreeRunner
As Openmoko development continues, Openmoko regularly releases updated versions of the Openmoko root filesystem, the kernel, and the U-Boot. These may be programmed into the Flash memory of Neo FreeRunner. You can use the USB cable and Openmoko provided tool to flash Neo FreeRunner.
Neo FreeRunner needs to boot into U-Boot when flashing.
You can download the flashing tool from: http://buildhost.openmoko.org/daily/neo1973/deploy/glibc/images/neo1973/dfu-util
On the GNU/Linux host, you you can use folloing command download U-Boot utility.
wget http://buildhost.openmoko.org/daily/neo1973/deploy/glibc/images/neo1973/dfu-util
Flashing Kernel
You can download the latest kernel from http://buildhost.openmoko.org/daily/neo1973/deploy/glibc/images/neo1973/
Type in the following command in the terminal of a GNU/Linux host.
./dfu-util -a (partion name) -R -D (download image file name)
ex:
./dfu-util -a kernel -R -D uImage-2.6.24+svnr4082-r4055-r3-neo1973.bin(downloaded Image file name )
When flashing succeeds
status(0) = No error condition is present
Done!
NOTE: The meaning of parameter you spcified:
-a the partition name |
Flashing Root Filesystem
You can download the latest root filesystem from : http://buildhost.openmoko.org/daily/neo1973/deploy/glibc/images/neo1973/
Type in the following command in the terminal of a GNU/Linux host.
./dfu-util -a rootfs -R -D openmoko-devel-image-fic-gta02.jffs2
When flashing succeeds
status(0) = No error condition is present
Done!
Connect To Neo FreeRunner By USB Networking
Connect Neo FreeRunner to Linux host with USB cable. After booting into Openmoko image, there will be a new interface, usb0, in your Linux host.
Manual Method
Type in the following command in the terminal of a GNU/Linux host.
ifconfig usb0 192.168.0.200 netmask 255.255.255.0 ssh root@192.168.0.202
Press Enter to pass the password.
Automatic Method
- Debian and derivatives (Ubuntu, Sidux etc.)
Edit /etc/network/interfaces
auto usb0 iface usb0 inet static address 192.168.0.200 netmask 255.255.255.0
Restart the networking service and type in the following command in the terminal of GNU/Linux host.
ssh root@192.168.0.202
Press Enter to pass the password.
Making things even more automatic
If you don't want to remember the IP number of your phone you can create an alias by adding the following line to your /etc/hosts:
192.168.0.202 openmoko
Now it should immediately be possible to connect your phone using the following command line:
ssh root@openmoko