Qtopia on FreeRunner/it
From Openmoko
(→Lanciare Qtopia) |
(→Internationalization) |
||
Line 118: | Line 118: | ||
This will clean up the file system and clear recovery flags in ext3 that ext2 does not support, then try booting from the MicroSD again. | This will clean up the file system and clear recovery flags in ext3 that ext2 does not support, then try booting from the MicroSD again. | ||
− | + | == Internationalization == | |
Qtopia comes with support for German and American English, and users from other countries will find that Qtopia's predictive keyboard makes writing in another language near impossible. One way to disable the predictive keyboard is to simply replace /opt/Qtopia/etc/dict/en_US/common.dawg and words.dawg with empty files (after backing them up). Qtopia normally looks in these files for words to suggest, and if it doesn't find any words that fit, it simply shows what you actually wrote. | Qtopia comes with support for German and American English, and users from other countries will find that Qtopia's predictive keyboard makes writing in another language near impossible. One way to disable the predictive keyboard is to simply replace /opt/Qtopia/etc/dict/en_US/common.dawg and words.dawg with empty files (after backing them up). Qtopia normally looks in these files for words to suggest, and if it doesn't find any words that fit, it simply shows what you actually wrote. |
Revision as of 13:18, 26 August 2008
Languages: |
English • العربية • Български • Česky • Dansk • Deutsch • Esperanto • Eesti • Español • فارسی • Suomi • Français • עברית • Magyar • Italiano • 한국어 • Nederlands • Norsk (bokmål) • Polski • Português • Română • Русский • Svenska • Slovenčina • Українська • 中文(中国大陆) • 中文(台灣) • Euskara • Català |
Questa pagina fornisce le istruzioni per installare Qtopia (la versione standard, non le varianti della ASU o della QtopiaOnX11) sul telefono GTA02 (Freerunner). È simile alla pagina Qtopia on Neo1973.
|
Stato corrente
L'8 Agosto 2008 Qtopia ha rilasciato l'ultima immagine flash per il Neo Freerunner della FIC (gta02) contentente losnapshot di Qtopia 4.3.2 (Versione: 4.3.2-080808) dell'8 Agosto 2008 (versione GPL).
Questa immagine può realmente fare e ricevere chiamate e messaggi di testo. Riesce a leggere tutti i contatti dalla scheda SIM (cosa che l'aggiornamento della 2007.2 sembra non sia in grado di fare). Contiene applicazioni che sembrano più stabili di quelle che si trovano sull'immagine della 2007.2. Fornisce diversi metodi per l'inserimento dei caratteri che sembrano più maturi. Non ha, comunque, un browser Web, né alcuna applicazione per il GPS.
Puoi trovare tutte le immagini di Qtopia qui.
Scarica l'immagine sopra indicata e segui queste istruzioni: Flashing the Neo FreeRunner
Opzione 2: Dual-Boot tra Qtopia e la 2007.2 (Qtopia caricato dalla scheda MicroSD)
Requisiti d'istallazione:
- Accesso tramite shell SSH all'immagine 2007.2 del Freerunner tramite interfaccia USB o WLAN.
- Una distribuzione anche desktop Linux (per scompattare l'immagine .jffs2, è funzionato anche usando una Ubuntu virtualizzata con VMWare)
Preparare la scheda SD
Controlla la Preparing the SD Card sezione della pagina Booting from SD per le istruzioni sul partizionamento e la formattazione. Dopo che avrai completato i passi per la "Formattazione della scheda SD", ritorna qui ed esegui i seguenti comandi:
mount /dev/mmcblk0p1 /media/card mkdir /media/card/boot
mkdir /media/mmcblk0p2 mount /dev/mmcblk0p2 /media/mmcblk0p2
Questi ti forniranno correttamente i requisiti per l'installazione del root filesystem e del kernel come di seguito indicato.
Istallare Qtopia
Estrarre l'immagine del root filesystem di Qtopia
Scarica l'immagine FLASH di Qtopia da Latest Images#Qtopia image from qtopia.net sul tuo computer Linux ed estrai il suo contenuto:
tar xzf qtopia-4.3.2-gta02-flash-*.tgz
Dovresti trovarti con due files:
- uImage-2.6.24+git18+9c058ff0d2641df3c36fc3300acb72078d2c41d4-r0-om-gta02.bin
- qtopia-4.3.2-gta02-rootfs-07172049.jffs2
Ora estrai il root filesystem dal file jffs2 usando il comando che trovi qui.
Creare un tarball compresso
Ora archivia e comprimi il root filesystem:
# tar czf qtopia-4.3.2-gta02-rootfs-07172049.tar.gz <mountpoint> .
Dove <mountpoint> è la directory dove il filesystem jffs2 è stato montato.
Installare il Filesystem Root
Trasferisci il tarball compressed sulla seconda partizione della MicroSD che è montata sul FreeRunner:
scp qtopia-4.3.2-gta02-rootfs-07172049.tar.gz root@192.168.0.202:/media/mmcblk0p2/
Loggati sul tuo FreeRunner e spacchetta il filesystem root:
cd /media/mmcblk0p2 tar xzf qtopia-4.3.2-gta02-rootfs-07172049.tar.gz rm qtopia-4.3.2-gta02-rootfs-07172049.tar.gz rm -f /media/mmcblk0p2/boot/*
Nota: l'ultimo passaggio rimuove l'immagine del kernel dalla seconda partizione. Infatti U-Boot non può trovare il file uImage.bin nella prima partizione se un'immagine del kernel esiste nella directory boot/ sulla seconda partizione.
Installare il Kernel
Dalla tua Linux box rinomina il file uImage-2.6.24+git18+9c058ff0d2641df3c36fc3300acb72078d2c41d4-r0-om-gta02.bin come uImage.bin e copialo nella directory di boot sulla prima partizione della MicroSD. Dipendendo dalla versione di U-Boot che hai installato, questo potrebbe non funzionare. Per supportare ogni possibile versione, mettine una copia anche nella directory /media/card. C'è abbastanza spazio nella prima partizione da permetterci di acere uImage.bin in entrambi i posti.
mv uImage-2.6.24+git18+9c058ff0d2641df3c36fc3300acb72078d2c41d4-r0-om-gta02.bin uImage.bin scp uImage.bin root@192.168.0.202:/media/card/boot/ scp uImage.bin root@192.168.0.202:/media/card/
Option 3: updating from source
NOTE: This will upgrade only opt/Qtopia directory, you should use opkg update/upgrade for the rest |
Original Qtopia images (the distribution released by Trolltech, not ASU) are rarely released as a rootfs image, but the source code is often updated. If you want to reflash your OM with the latest version of Qtopia you might build it from sources. This has been explained in this thread of the community mailing list. Summing up:
- get the latest toolchain released by trolltech: http://www.qtopia.net/modules/mydownloads/singlefile.php?lid=38 and unzip it on your PC (as root)
cd / wget http://qtopia.net/downloads/neo/arm920t-eabi-ficgta01-toolchain.tgz tar xvzf arm920t-eabi-ficgta01-toolchain.tgz
- get the latest snapshot from trolltech: ftp://ftp.trolltech.com/qtopia/snapshots/
- once dowloaded untar it
tar xvzf qtopia-opensource-src-4.3.2-snapshot-20080806.tar.gz
- make a "build" dir
mkdir build cd build
- configure and make:
../qtopia-opensource-src-4.3.2-snapshot-20080806/configure -device ficgta01 make
This will take some time (couple hours). Note that the option "-device ficgta01" should work for both neo and freerunner. Then:
make install
will make a root directory into build directory. That directory should be copied to /opt/Qtopia of your phone with scp. once done restart qpe or whole phone.
Lanciare Qtopia
Ora spegni il FreeRunner
shutdown -h now
Log into U-Boot in the NOR Flash to boot from the MicroSD card: (instructions from Booting the Neo FreeRunner)
- Press and hold Power button
- Then while still pressing the Power button, press and hold AUX button for 5 to 8 seconds.
- A boot menu will appear.
- Press the AUX button to select "Boot from MicroSD" and then press the Power button to execute.
Qtopia should now boot.
Note: you may get a kernel panic which says that "optional features not supported". If this is the case, boot back into 2007.2 and run
umount /dev/mmcblk0p2 fsck.ext3.e2fsprogs /dev/mmcblk0p2
This will clean up the file system and clear recovery flags in ext3 that ext2 does not support, then try booting from the MicroSD again.
Internationalization
Qtopia comes with support for German and American English, and users from other countries will find that Qtopia's predictive keyboard makes writing in another language near impossible. One way to disable the predictive keyboard is to simply replace /opt/Qtopia/etc/dict/en_US/common.dawg and words.dawg with empty files (after backing them up). Qtopia normally looks in these files for words to suggest, and if it doesn't find any words that fit, it simply shows what you actually wrote.
Adding characters to the keyboard requires modifications to the source code, as described here.