Neo FreeRunner Wifi
From Openmoko
Line 26: | Line 26: | ||
group=TKIP CCMP | group=TKIP CCMP | ||
psk="secret key" | psk="secret key" | ||
+ | priority=50 | ||
} | } | ||
Line 38: | Line 39: | ||
# WEP: | # WEP: | ||
network = { | network = { | ||
− | ssid=" | + | ssid="your_ssid" |
scan_ssid=1 | scan_ssid=1 | ||
key_mgmt=NONE | key_mgmt=NONE | ||
wep_tx_keyidx=0 | wep_tx_keyidx=0 | ||
− | wep_key0=" | + | wep_key0="secret key" |
priority=8 | priority=8 | ||
} | } |
Revision as of 19:03, 3 July 2008
To get wlan working with your NeoFreerunner, you can follow these steps:
1. create and edit a suitable /etc/wpa_supplicant/wpa_supplicant.conf (use your favourite search engine to get known the syntax)
2. execute `ifup eth0`
3. execute `wpa_supplicant -ieth0 -c/etc/wpa_supplicant/wpa_supplicant.conf` (you can add a & for running in background)
4. get a IP via dhcp: `udhcpc eth0`
that's it, your wlan should work
Sample wpa_supplicant.conf:
ctrl_interface=/var/run/wpa_supplicant eapol_version=1 ap_scan=1 # WPA2: network={ ssid="your ssid" scan_ssid=1 proto=RSN key_mgmt=WPA-PSK pairwise=CCMP TKIP group=TKIP CCMP psk="secret key" priority=50 } # WPA: network = { ssid="your_ssid" scan_ssid=1 psk"secret key" priority=10 } # WEP: network = { ssid="your_ssid" scan_ssid=1 key_mgmt=NONE wep_tx_keyidx=0 wep_key0="secret key" priority=8 } # Open: network={ ssid="massinger" key_mgmt=NONE priority=5 }