User:Historybuff/notes
From Openmoko
Historybuff (Talk | contribs) (elrond's incantation for recording) |
Historybuff (Talk | contribs) m (formatting) |
||
Line 28: | Line 28: | ||
alsactl can do it (alsamixer) | alsactl can do it (alsamixer) | ||
+ | <pre> | ||
alsactl -f /etc/alsa/capturehandset.state restore | alsactl -f /etc/alsa/capturehandset.state restore | ||
arecord -f cd -t wav -d 10 foo.wav | arecord -f cd -t wav -d 10 foo.wav | ||
Line 33: | Line 34: | ||
alsactl -f /etc/alsa/stereoout.state restore | alsactl -f /etc/alsa/stereoout.state restore | ||
aplay foo.wav | aplay foo.wav | ||
+ | </pre> |
Revision as of 00:58, 8 September 2007
Orientation of screen:
xrandr -o 1 turns screen to landscape mode (xrandr -o 0 to go back to ordinary portrait)
Getting Battery status: cat `find /sys/ -name battvolt` the output is in millivolts. ~4224 millivolts is completely charged (observed 3568 lowest, 4207 highest)
exact location is /sys/devices/platform/s3c2410-i2c/i2c-0/0-0008/
nicer script (cwd must be above)- CHARGE=`cat battvolt` && awk -v charge=${CHARGE} 'BEGIN {print charge/4224*100" "charge }'
GTA01_gsm_modem for AT commands; Gsmd for manual AT stuff
To get sound working: alsactl -f /etc/alsa/gsmhandset.state restore
Trying to record sound from the mic:
cat /dev/dsp does sample the ADC It's then 'simply' a case of setting the mixer controls so that the sound is routed from the mic to the adc See the nice simple explanatory block diagram in the middle of http://wiki.openmoko.org/wiki/Neo1973_Audio_Subsystem for guidance. In principle. You need to find which mic input the mic is connected to, setup the input gain and mic selector appropriately,setup the ALC mixer right, then set it up to route to the left or right ADC alsactl can do it (alsamixer)
alsactl -f /etc/alsa/capturehandset.state restore arecord -f cd -t wav -d 10 foo.wav Make noise for 10 seconds alsactl -f /etc/alsa/stereoout.state restore aplay foo.wav