View source for User:Khiraly
From Openmoko
You do not have permission to edit this page, for the following reasons:
You can view and copy the source of this page:
Return to User:Khiraly.
You do not have permission to edit this page, for the following reasons:
You can view and copy the source of this page:
Return to User:Khiraly.
This is my personal page.
I installed a second Freerunner, and I collect here the necessary steps, to install a distro on it.
The best to use openmoko experimental for qi. I used qi-s3c2442-1.0.2+gitr243+36bb5c03756268ff15b2d95a043ffb39a919ce5c.udfu as of 2009-08-30.
Installation Please refer to Qi page, if you want to digg more.
apt-get install dfu-util
NOTE: if you dont press AUX for 30 sec, the Freerunner will automatically switch off (repower it the with the same method) |
sudo bash dfu-util -a u-boot -R -D qi-s3c2442-1.0.2+gitr243+36bb5c03756268ff15b2d95a043ffb39a919ce5c.udfu
the output is something like:
root@lamagep:~/Asztal/down/openmoko/qi# dfu-util -a u-boot -R -D qi-s3c2442-1.0.2+gitr243+36bb5c03756268ff15b2d95a043ffb39a919ce5c.udfu dfu-util - (C) 2007-2008 by OpenMoko Inc. This program is Free Software and has ABSOLUTELY NO WARRANTY . Opening USB Device 0x0000:0x0000... Claiming USB DFU Runtime Interface... Determining device status: state = appIDLE, status = 0 Device really in Runtime Mode, send DFU detach request... Resetting USB... Opening USB Device... Found Runtime: [0x1d50:0x5119] devnum=20, cfg=0, intf=0, alt=1, name="u-boot" Claiming USB DFU Interface... Setting Alternate Setting ... Determining device status: state = dfuIDLE, status = 0 dfuIDLE, continuing Transfer Size = 0x1000 bytes_per_hash=571 Starting download: [##################################################] finished! state(2) = dfuIDLE, status(0) = No error condition is present Done! Resetting USB to switch back to runtime mode root@lamagep:~/Asztal/down/openmoko/qi#
Having a working distrib in the NAND means, that you can use your freerunner as a uSD card reader, and install the newest distribs to uSD card.
NOTE: Using you phone from NAND is not as fast as booting directly from uSD card. So I recommend to use your phone from uSD card on daily basis |
dfu-util -a rootfs -R -D shr-image-om-gta02.jffs2 dfu-util -a kernel -R -D uImage-om-gta02-latest.bin
Here is a small partition tip for uSD. I prefer to partition into 3 the uSD card. One for current distrib, one for newer distrib (to try out), one for the /home dir, for easy upgrading.
In case of 512MB(only one distrib): 256MB for distrib, 256MB for /home In case of 4GB: 512MB for distrib1, 512MB for distrib2, 3GB for /home
These are some paroli related links.