View source for Bt-net-script
From Openmoko
You do not have permission to edit this page, for the following reasons:
You can view and copy the source of this page:
Return to Bt-net-script.
You do not have permission to edit this page, for the following reasons:
You can view and copy the source of this page:
Return to Bt-net-script.
Just copy the block below into a script called bt-net, and run bt-net to initiate IP over bluetooth.
Don't forget to change XX:XX:XX:XX:XX:XX out for the bluetooth interface on your PC, as found by executing "hcitool scan" on your neo.
#!/bin/sh echo '1' > /sys/bus/platform/devices/gta01-pm-bt.0/power_on #!!! change XX... to your correct PC bluetooth interface id (use "hcitool scan" to find it) !!! export PC_BT_ID=XX:XX:XX:XX:XX:XX sleep 1 #Winders stuff #pand -c $1 -r PANU -d NAP -e bnep0 -A -E -S #pand -n -c $1 -r PANU -d NAP -e bnep0 -A -E -S pand -c $PC_BT_ID --service NAP --autozap #wait for main pc to set up route while ! pand -l | grep bnep0 do echo waiting to connect pand -c $PC_BT_ID --service NAP --autozap sleep 1 done ip a add 10.0.0.2/24 dev bnep0 ip r del default ip r add default via 10.0.0.1